基于模糊故障树的数控刀架系统可靠性分析

刘英; 陈志恒; 陈宇

doi:10.13433/j.cnki.1003-8728.2016.0114

基于模糊故障树的数控刀架系统可靠性分析

doi: 10.13433/j.cnki.1003-8728.2016.0114

1.
重庆大学机械工程学院, 重庆 400030

基金项目:

国家"高档数控机床与基础制造装备"科技重大专项项目(2013ZX04012-031)与国产中高档数控转塔刀架系列产品开发及批量应用示范项目资助

详细信息

作者简介:
刘英(1965-),教授,博士,硕士生导师,研究方向为质量工程与可靠性、机械制造技术基础,liuyingu6682@163.com

计量
- 文章访问数: 265
- HTML全文浏览量: 51
- PDF下载量: 10
- 被引次数: 0
出版历程
- 收稿日期: 2014-02-26
- 刊出日期: 2016-01-05

The Reliability Analysis of CNC Turret System Based on Fuzzy Fault Tree

1.
College of Mechanical Engineering, Chongqing University, Chongqing 400030, China

摘要

摘要: 从数控刀架转位过程的失效模式出发,运用故障树分析理论,建立了以刀架锁不紧和刀架卡死为顶事件的故障树模型,并收集相关的故障历时数据。针对模型中各事件故障发生概率不确定等因素,引入模糊数学理论,构建概率模糊数,并给出运算法则。对模糊故障树进行定量分析,得到顶事件故障概率区间及底事件重要度排序。结果表明:发信元件、预定位元件及规范操作为影响刀架可靠性的薄弱环节,从而为刀架可靠性的提升提供了良好的数据分析基础。
- 数控刀架 /
- 故障树分析 /
- 可靠性 /
- 模糊数 /
- 故障概率
Abstract: The fault tree model of the CNC turret being not tight and stuck was developed with the failure modes of indexing process and the theory of FTA(fault tree analysis), also, the lasted failure data was collected. The probability fuzzy numbers were generated based on the fuzzy set theory, as it was difficult to gather the exact failure data for each event under uncertain situations, and the algorithms was given. The top event failure probability interval and the end event importance sorted were given on the quantitative analysis of the fuzzy fault tree. The results show that the Signal elements, re-positioning devices and Standard operation was the weakness for the reliability of CNC turret, which provides the basis of data analysis for improving reliability of CNC turret system.
- algorithms /
- data reduction /
- failure modes /
- fault tree analysis /
- fuzzy set theory

HTML全文

参考文献(15)

[1]	何宪国.AK31系列全功能数控转塔刀架工作原理及故障分析[J].机械管理与开发,2012,(2):55-56 He X G. The AK31 series global function numerical control tool turret's action principle and fault analysis[J]. Mechanical Management and Development, 2012,(2):55-56(in Chinese)
[2]	郑珊.基于故障分析的动力刀架可靠性试验研究[D].长春:吉林大学,2013:7-23 Zheng S. Study on reliability test of power tool rest based on fault analysis[D]. Changchun:Jilin University, 2013:7-23(in Chinese)
[3]	申桂香,李怀洋,张英芝,等.数控车床刀架系统故障分析[J].机床与液压,2011,39(19):126-129 Shen G X, Li H Y, Zhang Y Z, et al. Failure analysis of turret system of NC lathe[J]. Machine Tool & Hydraulics, 2011,39(19):126-129(in Chinese)
[4]	卢建伟.数控车床转塔刀架可靠性试验台的研制[D].长春:吉林大学,2013:11-16 Lu J W. Design and realization of reliability test-bed for CNC lathe turret tool[D]. Changchun:Jilin University, 2013:11-16(in Chinese)
[5]	黄贤振,吴茂昌,张义民,等.数控刀架转位系统可靠性稳健设计方法研究[J].兵工学报,2013,34(9):1132-1136 Huang X Z, Wu M C, Zhang Y M, et al. Research on reliability-based robust design method for rotation systems of CNC turrets[J]. Acta Armamentarii, 2013,34(9):1132-1136(in Chinese)
[6]	张立敏,申桂香,张英芝,等.小样本数控刀架的可靠性模型[J].吉林大学学报(工学版),2012,42(S1):96-99 Zhang L M, Shen G X, Zhang Y Z, et al. Research on reliability model for NC turret with small samples[J]. Journal of Jilin University(Engineering and Technology Edition), 2012,42(S1):96-99(in Chinese)
[7]	周正伐.可靠性工程基础[M].2版.北京:中国宇航出版社,2009:116-120 Zhou Z F. Reliability engineering basis[M]. 2 edition. Beijing:China Aerospace Press, 2009:116-120(in Chinese)
[8]	龚庆祥,赵宇,顾长鸿.型号可靠性工程手册[M].北京:国防工业出版社,2007:107-110 Gong Q X, Zhao Y, Gu C H. Type reliability engineering handbook[M]. Beijing:National Defense Industry Press, 2007:107-110(in Chinese)
[9]	严军.基于故障树分析法的航空活塞发动机故障诊断专家系统研究[D].成都:电子科技大学,2010:13-16 Yan J. The research on fault diagnosis expert system of aviation piston engine based on FTA[D]. Chengdu:University of Electronic Science and Technology of China, 2010:13-16(in Chinese)
[10]	朱继洲.故障树原理和应用[M].西安:西安交通大学出版社,1989:22-26 Zhu J Z. Principle and application of fault tree[M]. Xi'an:Xi'an Jiaotong University Press, 1989:22-26(in Chinese)
[11]	Ross T J.模糊逻辑及其工程应用[M].钱同惠,沈其聪,译.北京:电子工业出版社,2001:301-318 Ross T J. Fuzzy logic with engineering application[M]. Qian T H, Shen Q C, trans. Beijing:Publishing House of Electronics Industry, 2001:301-318(in Chinese)
[12]	杨培林,赵柱,许艾明,等.基于模糊故障树的主轴箱可靠性分析[J].现代制造工程,2011,(11):86-89 Yang P L, Zhao Z, Xu A M, et al. Reliability analysis for headstock of heavy machine tool based on fuzzy fault tree[J]. Modern Manufacturing Engineering, 2011,(11):86-89(in Chinese)
[13]	黄兆哲.数控高速冲床的故障分析与研究[D].长春:吉林大学,2013:35-39 Huang Z Z. Research on fault analysis technique for CNC high-speed punch press[D]. Changchun:Jilin University, 2013:35-39(in Chinese)
[14]	Cheng S R, Lin B S, Hsu B M, et al. Fault-tree analysis for liquefied natural gas terminal emergency shutdown system[J]. Expert Systems with Applications, 2009,36(9):11918-11924
[15]	张恒.基于元动作的数控机床可靠性分析与控制技术研究[D].重庆:重庆大学,2012:51-56 Zhang H. Research of reliability analysis and control technology of CN machine based on element action[D]. Chongqing:Chongqing University, 2012:51-56(in Chinese)