The Research Status of Adiabatic Shear Band in Dynamic Deformation
-
摘要: 对材料动态变形中的绝热剪切带研究现状进行了大致的总结。从绝热剪切产生机理和失稳判据、剪切带内微观织构、实验技术研究与发展与数值模拟四个方面对目前的研究进行了总结与比较,认为热粘塑性本构关系应该考虑微观结构变化及材料的应力状态,才能够有效地分析微观结构变化对宏观变形局域化的影响;绝热剪切带内部组织结构和微观结构变化的研究仍旧存在不足,绝热剪切带微观组织的演化进程不够明确;数值模拟技术考虑的影响因素不够全面等。对绝热剪切带的发展趋势提出了自己的见解。Abstract: The paper roughly summarized the research status ofadiabatic shear band in dynamic deformation. From four aspects of the mechanism of adiabatic shear and instabilitycriterion, microscopic texture of adiabatic shear band,experiment techniques and numerical simulation research,the current study and development are summarized and compared. The paper considered that the thermo visco plastic constitutive model should consider the change of microstructure and the state of stress, then it can effectively analyze the impact onmacroscopic deformation localized by the change of microstructure. Secondly, the insufficient sections still exist in the aspect of microscopic texture and microstructure change, the evolution process of the microscopic texture in adiabatic shear band have not been definited, the influence factors which considered in the numerical simulationtechniques are also not comprehensive enough. At last, the paper put forward the own views of the trend on adiabatic shear band.
-
[1] Zener C, Hollomon J H. Effect of strain rate upon plastic flow of steel[J]. Journal of Applied Physics, 1944,15(1):22-23 [2] Tresca M H. On further application of the flow solids[J]. Proceedings of the Institute of Mechanical Engineers, 1878,30:301-345 [3] Zener C, Hollomon J H. Plastic flow and rupture of metals[J]. Transactions of the America Society of Mechanical, 1944,33:163-235 [4] Dodd B, Bai Y L. Adiabatic shear localization[M]. Oxford:Pergamon, 1992 [5] 肖大武,李英雷,蔡灵仓.绝热剪切研究进展[J].实验力学,2010,25(4):463-475 Xiao D W, Li Y L, Cai L C. Progress in research on adiabatic shearing[J]. Journal of Experimental Mechanics, 2010,25(4):463-475(in Chinese) [6] 谭成文,王富耻,李树奎.绝热剪切变形局部化研究进展及发展趋势[J].兵器材料科学与工程,2003,26(5):62-67 Tan C W, Wang F C, Li S K. Progresses and trends in researches on adiabatic shear deformation[J]. Ordnance Material Science and Engineering, 2003,26(5):62-67(in Chinese) [7] 徐永波,白以龙.动态载荷下剪切变形局部化、微结构演化与剪切断裂研究进展[J].力学进展,2007,37(4):496-516 Xu Y B, Bai Y L. Shear localization microstructure evolution and fracture under high-strain rate[J]. Advances in Mechanics, 2007,37(4):496-516(in Chinese) [8] 杨扬,程信林.绝热剪切的研究现状及发展趋势[J].中国有色金属学报,2002,12(3):401-408 Yang Y, Cheng X L. Current status and trends in researches on adiabatic shearing[J]. Transactions of Nonferrous Metals Society of China, 2002,12(3):401-408(in Chinese) [9] Recht R F. Catastrophic thermoplastic shear[J]. Journal of Applied Mechanics, 1964,31(2):189-193 [10] Culver R S. Thermal instability strain in dynamic plastic deformation[M]. Metallurgical Effects at High Strain Rates. New York:Springer, 1973:519-530 [11] Batra R C, Kim C H. Analysis of shear banding in twelve materials[J]. International Journal of Plasticity, 1992,8(4):425-452 [12] 徐天平,王礼立,卢维娴.高应变率下钛合金Ti-6Al-4V的热-粘塑性特性和绝热剪切变形[J].爆炸与冲击,1987,7(1):18 Xu T P, Wang L L, Lu W X. The Thermo-viscoplasticity and adiabatic shear deformation for a titanium alloy Ti-6Al-4V under high strain rates[J]. Explosion and Shock Waves, 1987,7(1):18(in Chinese) [13] Rittel D, Wang Z G, Merzer M. Adiabatic shear failure and dynamic stored energy of cold work[J]. Physical Review Letters, 2006,96(7):075502 [14] Clifton R J. Material response to ultra high loading rates[R]. Report No. NM AB-356, National Materials Advisory Board, NAS, Washington DC, Chapter 8, 1979 [15] Wright T W, Walter J W. On stress collapse in adiabatic shear bands[J]. Journal of the Mechanics and Physics of Solids, 1987,35(6):701-720 [16] Wright T W, Ockendon H. A model for fully formed shear bands[J]. Journal of the Mechanics and Physics of Solids, 1992,40(6):1217-1226 [17] Backman M E, Finnegan S A. The propagation of adiabatic shear[M]. Metallurgical Effects at High Strain Rates. New York:Springer US, 1973:531-543 [18] 汪冰峰.钛及钛合金中绝热剪切带微观结构演化及其集体行为研究[D].长沙:中南大学,2006 Wang B F. Studies on the microstructure evolution and collective behavior of adiabatic shear bands in titanium and its alloy[D]. Changsha:Central South University, 2006(in Chinese) [19] Li Q, Xu Y B, Lai Z H, et al. A model of dynamic recrystallization in alloys during high strain plastic deformation[J]. Journal of Materials Science & Technology, 1999,15(5):435-439 [20] Meyers M A, Pak H R. Observation of an adiabatic shear band in titanium by high-voltage transmission electron microscopy[J]. Acta Metallurgica, 1986,34(12):2493-2499 [21] Andrade U, Meyers M A, Vecchio K S, et al. Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper[J]. Acta Metallurgica et Materialia, 1994,42(9):3183-3195 [22] Shewman P G, Zackey V F. Response of metals to high velocity deformation[M]. New York:Interscience Publishers, 1961:115 [23] Mataya M C, Carr M J, Krauss G. Flow localization and shear band formation in a precipitation strengthened austenitic stainless steel[J]. Metallurgical Transactions A, 1982,13(7):1263-1274 [24] Meyers M A, Chen Y J, Marquis F D S, et al. High-strain, high-strain-rate behavior of tantalum[J]. Metallurgical and Materials Transactions A, 1995,26(10):2493-2501 [25] Nemat-Nasser S, Isaacs J B, Liu M Q. Microstructure of high-strain, high-strain-rate deformed tantalum[J]. Acta Materialia, 1998,46(4):1307-1325 [26] Wright T W. The physics and mathematics of adiabatic shear bands[M]. Cambridge:Cambridge University Press, 2002 [27] 唐林.高应变率下纯铜强迫剪切变形行为研究[D].长沙:中南大学,2012 Tang L. Investigation on forced shear deformation behavior of Cu under high strain rate[D]. Changsha:Central South University, 2012(in Chinese) [28] Lins J F C, Sandim H R Z, Kestenbach H J, et al. A microstructural investigation of adiabatic shear bands in an interstitial free steel[J]. Materials Science and Engineering:A, 2007,457(1-2):205-218 [29] 明璐.铜的绝热剪切带扩展速度的研究[D].西安:西北工业大学,2015 Ming L. Investigation on propagation velocity of adiabatic shear band[D]. Xi'an:Northwestern Polytechnical University, 2015(in Chinese) [30] Costin G, Kogut M D, Hyman C B, et al. Endocrine abnormalities in thalassemia major[J]. American Journal of Diseases of Children, 1979,133(5):497-502 [31] Harley C B, Reynolds R P. Analysis of E. coli pormoter sequences[J]. Nucleic Acids Research, 1987,15(5):2343-2361 [32] Kalthoff J F, Winkler S. Failure mode transition at high rates of shear loading[C]//Impact Loading and Dynamic Behavior of Materials, Oberursel:DGM Informationsgesellschaft mbH, 1987,1:185-195 [33] Christman T, Needleman A, Suresh S. An experimental and numerical study of deformation in metal-ceramic composites[J]. Acta Metallurgica, 1989,37(11):3029-3050 [34] Mason R P, Fitzgerald W F, Morel F M M. The biogeochemical cycling of elemental mercury:anthropogenic influences[J]. Geochimica et Cosmochimica Acta, 1994,58(15):3191-3198 [35] Campbell J D, Ferguson W G. The temperature and strain-rate dependence of the shear strength of mild steel[J]. Philosophical Magazine, 1970,21(169):63-82 [36] Zhou M, Ravichandran G, Rosakis A J. Dynamically propagating shear bands in impact-loaded prenotched plates-II. numerical simulations[J]. Journal of the Mechanics and Physics of Solids, 1996,44(6):1007-1032 [37] Zhou M, Rosakis A J, Ravichandran G. On the growth of shear bands and failure-mode transition in prenotched plates:a comparison of singly and doubly notched specimens[J]. International Journal of Plasticity, 1998,14(4-5):435-451 [38] Marchand A, Duffy J. An experimental study of the formation process of adiabatic shear bands in a structural steel[J]. Journal of the Mechanics and Physics of Solids, 1988,36(3):251-283 [39] Mason J J, Rosakis A J, Ravichandran G. Full field measurements of the dynamic deformation field around a growing adiabatic shear band at the tip of a dynamically loaded crack or notch[J]. Journal of the Mechanics and Physics of Solids, 1994,42(11):1679-1697 [40] Liao S, Duffy J. Adiabatic shear bands in a Ti-6Al-4V titanium alloy[J]. Journal of the Mechanics and Physics of Solids, 1998,46(11):2201-2231 [41] 李剑荣,虞吉林,魏志刚.冲击载荷下钨合金圆台试件绝热剪切变形局部化的数值模拟.爆炸与冲击,2002,22(3):257-262 Li J R, Yu J L, Wei Z G. Numerical simulation of adiabatic shear localization in truncated-conic specimens of tungsten heavy alloys under impact loading[J]. Explosion and Shock Waves, 2002,22(3):257-262(in Chinese) [42] Belk J A, Watson C H. The dynamic compression test applied to tungsten alloys[J]. Material and Manufacturing Process, 1994,9(6):1155-1161 [43] Sabih A, Nemes J A. Internal ductile failure mechanisms in steel cold heading process[J]. Journal of Materials Processing Technology, 2009,209(9):4292-4311 [44] Nesterenko V F, Meyers M A, LaSalvia J C, et al. Shear localization and recrystallization in high-strain, high-strain-rate deformation of tantalum[J]. Materials Science and Engineering:A, 1997,229(1-2):23-41 [45] Minnaar K, Zhou M. An analysis of the dynamic shear failure resistance of structural metals[J]. Journal of the Mechanics and Physics of Solids, 1998,46(10):2155-2170 [46] Culver R S. Torsional-impact apparatus[J]. Experimental Mechanics, 1972,12(9):398-405 [47] Lindholm U S, Johnson G R. Strain-rate effects in metals at large shear strains[M]. Material Behavior Under High Stress and Ultrahigh Loading Rates. New York:Springer, 1983:61-79 [48] Huddart J, Harding J, Bleasdale P A. The effect of strain rate on the tensile flow and fracture of α-uranium[J]. Journal of Nuclear Materials, 1980,89(2-3):316-330 [49] Kalthoff J F. Modes of dynamic shear failure in solids[J]. International Journal of Fracture, 2000,101(1-2):1-31 [50] Rittel D, Wang Z G, Merzer M. Some experiments on adiabatic shear failure[J]. Journal de Physique IV, 2006, 134:835-838 [51] Dodd B, Bai Y L. Adiabatic shear localization:frontiers and advances[M]. Amsterdam:Elsevier Science, 2012 [52] Wei Z G, Yu J L, Hu S S, et al. Influence of microstructure on adiabatic shear localization of pre-twisted tungsten heavy alloys[J]. International Journal of Impact Engineering, 2000,24(6-7):747-758 [53] Rittel D, Lee S, Ravichandran G. A shear-compression specimen for large strain testing[J]. Experiment Mechanics, 2002,42(1):58-64 [54] Medyanik S N, Liu W K, Li S F. On criteria for dynamic adiabatic shear band propagation[J]. Journal of the Mechanics and Physics of Solids, 2007,55(7):1439-1461 [55] Rittel D, Landau P, Venkert A. Dynamic recrystallization as a potential cause for adiabatic shear failure[J]. Physical Review Letters, 2008,101(16):165501 [56] Rohde R W, Butcher B M, Holland J R, et al. Metallurgical effects at high strain rates[M]. New York:Plenum Press, 1973:519 [57] Staker M R. On adiabat ic shear band determinations by surface observations[J]. Scripta Metallurgica, 1980,14(6):677-680 [58] 包合胜,王礼立,卢维娴.钛合金在低温下的高速变形特性和绝热剪切[J].爆炸与冲击,1989,9(2):109-119 Bao H S, Wang L L, Lu W X. The high velocity deformation and adiabatic shearing of a titanium alloy at low temperature[J]. Explosion and Shock Waves, 1989,9(2):109-119(in Chinese) [59] Guduru P R, Ravichandran G, Rosakis A J. Observations of transient high temperature vortical microstructures in solids during adiabatic shear banding[J]. Physical Review E, 2001,64(3):036128 [60] Zhang Z, Clifton R J. Shear band propagation from a crack tip[J]. Journal of the Mechanics and Physics of Solids, 2003,51(11-12):1903-1922 [61] Zhang Z, Clifton R J. Shear band propagation from a crack tip subjected to Mode II shear wave loading[J]. International Journal of Solids and Structures, 2007,44(6):1900-1926 [62] Li S F, Liu W K, Rosakis A J, et al. Mesh-free Galerkin simulations of dynamic shear band propagation and failure mode transition[J]. International Journal of Solids and Structures, 2002,39(5):1213-1240 [63] Lebouvier A S, Lipinski P, Molinari A. Numerical study of the propagation of an adiabatic shear band[J]. Le Journal de Physique IV, 2000,10(PR9):Pr9-403-Pr9-408
点击查看大图
计量
- 文章访问数: 408
- HTML全文浏览量: 64
- PDF下载量: 25
- 被引次数: 0