涡旋压缩机通用涡旋型线啮合条件研究

王立存; 张国进; 朱明; 聂新; 宋李俊; 绕鹏

doi:10.13433/j.cnki.1003-8728.2015.1204

涡旋压缩机通用涡旋型线啮合条件研究

doi: 10.13433/j.cnki.1003-8728.2015.1204

王立存^1,2,
张国进¹,
朱明³,
聂新¹,
宋李俊¹,
绕鹏⁴

1.
重庆理工大学机械工程学院, 重庆 400054;
2.
重庆工商大学制造装备机构设计与控制重庆市重点实验室, 重庆 400067;
3.
中船重工(重庆)海装风电设备有限公司, 重庆 401122;
4.
北奔重型汽车集团有限公司研发中心, 重庆 401329

基金项目:

国家自然科学基金项目(51375515)、重庆市科技攻关计划项目(CSTC2011AC6086)及重庆工商大学青年博士基金项目(1152005)资助

详细信息

作者简介:
王立存(1978-),教授,博士,研究方向为涡旋压缩机设计理论和数字化设计与制造技术,wanglicun@163.com

计量
- 文章访问数: 244
- HTML全文浏览量: 35
- PDF下载量: 21
- 被引次数: 0
出版历程
- 收稿日期: 2014-02-25
- 刊出日期: 2015-12-05

Exploring Conjugate Meshing Conditions of General Scroll Profiles

1.
College of Mechanical Engineering, Chongqing University of Technology, Chongqing, 400054, China;
2.
Chongqing Key Laboratory of Manufacturing Equipment Mechanism Design and Control, Chongqing Technology and Business University, Chongqing 400067, China;
3.
CSIC (Chongqing) Haizhuang Wind Power Equipment Ltd, Chongqing 401122, China;
4.
Research and Development Center of BEIBEN Trucks Group Co., Ltd., Chongqing, 401329, China

摘要

摘要: 针对涡旋压缩机研究领域中的通用型线啮合条件和型线方程相关理论的不完整性,总结了国内外文献关于控制方程和通用型线啮合条件的研究内容,利用平面曲线啮合、微分几何关系、向量计算等理论,根据涡旋压缩机实际工作原理建立了动静盘涡旋型线啮合的数学模型。分别利用动静盘涡旋型线向量表达式证明控制方程,给出讨论;用数学形式说明了通用型线啮合广义条件;通过求取动静盘涡旋型线在啮合点上的曲率半径,验证了以向量表示的型线啮合的必然性。综合以上研究总结得出了比较完整的涡旋型线共轭啮合条件及对应动静盘涡旋型线方程。
- 涡旋压缩机 /
- 通用型线 /
- 矩阵代数 /
- 几何关系 /
- MATLAB
Abstract: Because the general scroll profile conjugate meshing and the profile equation theory in the field of scroll compressor research are incomplete, we presented the related research information about control equation and general profile meshing conditions. Then we build a mathematical model of scroll profile conjugate meshing according to the actual work of the scroll compressor, which depends on the plane curve meshing theory, differential geometry and matrix algebra. The control equation was proved and discussed using vector expression; generalized meshing conditions of a general profile was illustrated in mathematical form; the certainty of scroll profile conjugate meshing in vector expression was verified through calculating the radius of curvature. Above all, full conditions of scroll profile conjugate meshing and the corresponding profile equations are given.
- calculations /
- compressors /
- geometry /
- mathematical models /
- MATLAB

HTML全文

参考文献(15)

[1]	屈宗长,樊灵,王迪生.通用型线涡旋压缩机的几何理论[J].西安交通大学学报,1999,33(11):39-42 Qu Z C, Fan L, Wang D S. Geometric theories of general profiles for scroll compressor[J]. Journal of Xi'an Jiaotong University, 1999,33(11):39-42 (in Chinese)
[2]	王立存,张贤明,陈国强,等.基于泛函的通用涡旋型线形状变化规律研究[J].中国机械工程,2011,22(16):1980-1983 Wang L C, Zhang X M, Chen G Q, et al. Research on shape variation disciplinarian of scroll profiles based on functional theory[J]. China Mechanical Engineering, 2011,22(16):1980-1983 (in Chinese)
[3]	Bush J W, Beagle W P. Derivation of a general relation governing the conjugacy of scroll profiles[C]//Proceeding of International Compressor Engineering Conference at Purdue. West Lafayette, USA, 1992
[4]	樊灵,屈宗长,靳春梅.涡旋压缩机型线研究的概述[J].机械工程学报,2000,36(9):1-4,10 Fan L, Qu Z C, Jin C M. Status and development of profile designing for scroll compressor[J]. Chinese Journal of Mechanical Engineering, 2009,36(9):1-4,10 (in Chinese)
[5]	王君,李雪琴.多齿涡旋机械啮合型线的构建理论[J].机械工程学报,2008,44(4):74-79,86 Wang J, Li X Q. Construction theories of meshing profile for multi-wraps scroll machinery[J]. Chinese Journal of Mechanical Engineering, 2008,44(4):74-79,86 (in Chinese)
[6]	陈进,王立存,李世六.通用涡旋型线理论研究与深入分析[J].机械工程学报,2006,42(5):11-15 Chen J, Wang L C, Li S L. Study and profound analysis on general profile theory of scrolls[J]. Chinese Journal of Mechanical Engineering, 2006,42(5):11-15 (in Chinese)
[7]	刘涛,邬再新,刘振全.法向等距线法生成涡旋压缩机型线的研究[J].机械工程学报,2004,40(6):55-58 Liu T, Wu Z X, Liu Z Q. Study on generating profile with nomal-equidistant-curve method for scroll compressor[J]. Chinese Journal of Mechanical Engineering, 2004,40(6):55-58 (in Chinese)
[8]	刘涛,芮执元,邬再新,等.基于正交标架矢量函数的涡旋机械集成型线研究[J].农业机械学报,2010,41(5):209-212 Liu T, Rui Z Y,Wu Z X, et al. Integration of profile for scroll fluid machine based on vector function of orthogonal frame[J]. Transactions of the Chinese Society for Agricultural Machinery, 2010,41(5): 209-212 (in Chinese)
[9]	畅云峰,朱杰,江波,等.涡旋压缩机啮合理论及通用型线控制方程[J].压缩机技术,1998,(2):12-13 Chang Y F, Zhu J, Jiang B, et al. Scroll compressor line meshing theory and universal equations[J]. Compressor Technology, 1998,(2):12-13 (in Chinese)
[10]	马力.简明微分几何[M].北京:清华大学出版社,2004 Ma L. Simple differential geometry[M]. Beijing: Tsinghua University Press, 2004 (in Chinese)
[11]	王立存,陈进,张贤明,等.基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化[J].中国机械工程,2010,21(16):1898-1901 Wang L C, Chen J, Zhang X M, et al. Study on geometry theory of variable wall thickness scroll profiles and shape optimization based on functional theory[J]. China Mechanical Engineering, 2010,21(16):1898-1901 (in Chinese)
[12]	刘扬娟.涡旋啮合的数学基础[J].压缩机技术,1999,(1):6-9 Liu Y J. Mathematical basis of scroll meshing[J]. Compressor Technology, 1999,(1):6-9 (in Chinese)
[13]	Creux L. Rotary engine[P]. USA: 801182, 1905
[14]	Cui M M. Comparative study of the impact of the dummy port in a scroll compressor[J]. International Journal of Refrigeration, 2007,30(5):912-925
[15]	Bukac H. The theory of a scroll profile[C]// International Compressor Engineering Conference, 2006:1747