Finite Element Analysis of Forming Accuracy in Roll-bending Process for Large Cross-section Z Profile
-
摘要: 为了提高型材滚弯成形外形轮廓的精度,研究了Z型材滚弯成形回弹变形规律,建立了型材成形半径与滚弯机侧滚轮位移的关系,给出了考虑回弹变形的型材滚弯成形工艺参数。基于ABAQUS有限元软件,建立了型材滚弯成形过程的三维模型,分析了主滚轮尺寸、夹紧力和摩擦系数对型材沿长度方向各段曲率变化的影响。结果表明:主滚轮尺寸越大,曲率分布越均匀;并确定出该型材滚弯成形时合理的夹紧力和摩擦系数范围。应用模拟分析确定的最佳工艺参数完成该型材的滚弯成形加工,验证了该参数对滚弯型材外形精度的提高作用。Abstract: To improve the shape accuracy of profile in the roll-bending, the springback law Z shaped profile in roll-bending is experimentally investigated, the relation between the forming radius of profile and displacement of the side roll is established and the forming parameters for roll-bending is obtained with considering the springback. A 3D model for the roll-bending forming is proposed, and ABAQUS software is employed to analyze the influence of the main roller size, clamp force and friction coefficient on the curvature radius of each section in the longitude direction. The results show that the bigger main roller size is, the better the uniform distributed curvature. The reasonable clamp force and the range of friction coefficient of this Z shaped profile were given in this paper. With adopting these optiumu parameters obtained with FE simulation, the roll-bending experiments were carried out, and the the shape accuracy for final formed profile was improved.
-
Key words:
- ABAQUS /
- calculations /
- computer simulation /
- curvature distribution /
- finite element method /
- optimization
-
[1] Ktari A, Antar Z, Haddar N, et al. Modeling and computation of the three-roller bending process of steel sheets[J]. Journal of Mechanical Science and Technology, 2012,26(1):123-128 [2] 孙卫东.数控四轴型材滚弯机应用研究[D]. 西安:西北工业大学,2001 Sun W D. Application research on CNC four axis profile roll bending machine[D]. Xi'an: Northwestem Polytechnical University,2001 (in Chinese) [3] Gandhi A H, Shaikh A A, Raval H K. Formulation of springback and machine setting parameters for multi-pass three-roller cone frustum bending with change of flexural modulus[J]. International Journal of Material Forming, 2009,2(1):45-57 [4] Feng Z K, Champliaud H. Modeling and simulation of asymmetrical three-roll bending process[J]. Simulation Modelling Practice and Theory, 2011,19(9):1913-1917 [5] Hua M, Lin Y H. Effect of strain hardening on the continuous four-roll plate edge bending process[J]. Journal of Materials Processing Technology, 1999,89-90:12-18 [6] Hua M, Lin Y H. Large deflection analysis of elastoplastic plate in steady continuous four-roll bending process[J]. International Journal of Mechanical Sciences, 1999,41(12):1461-1483 [7] 周养萍,亓江文.飞机Z形框滚弯加工数值模拟与分析[J].塑性工程学报,2010,17(5):27-31 Zhou Y P, Qi J W. The numerical simulation and analysis on the roll-banding of the airplane Z-profiled frame[J]. Journal of Plasticity Engineering, 2010,17(5):27-31 (in Chinese) [8] 周养萍,亓江文.型材变曲率滚弯过程有限元模拟[J].机械科学与技术,2008,27(8):1113-1115 Zhou Y P, Qi J W. Simulation of profiled beam variable curvature roll banding by finite element analysis[J]. Mechanical Science and Technology for Aerospace Engineering, 2008,27(8):1113-1115 (in Chinese) [9] Tailor V K, Gandhi A H, Moliya R D, et al. Finite element analysis of deformed geometry in three-roller plate bending process[C]//Proceedings of the ASME International Manufacturing Science and Engineering Conference, 2009:609-616 [10] 金霞,鲁世红.U型材单轴柔性滚弯成形回弹有限元分析[J].南京航空航天大学学报,2010,42(1):117-1215 Jin X, Lu S H. Springback study of u-section one-axle rotary shaping with elastic pad medium based on finite element analysis[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2010,42(1):117-1215 (in Chinese) [11] Han X H, Hua L. 3D FE modeling of cold rotary-Processing Technology, 2009,209(12-13):5353-5362 [12] Sui Z, Cai Z Y, Lan Y W, et al. Simulation and software design of continuous flexible roll bending process for three dimensional surface parts[J]. Materials & Design, 2014,54:498-506 [13] Fu Z M. Numerical simulation of springback in air-bending forming of sheet metal[J]. Applied Mechanics and Materials, 2012,121-126:3602-3606 [14] Leacock A G, McCracken D, Brown D, et al. Numerical simulation of the four roll bending process[J]. Materials and Manufacturing Processes, 2012,27(4):370-376 [15] Behrouzi A, Shakeri M, Dariani B M. Inverse analysis of springback in sheet metal forming by finite element method[J]. EngOpt, 2008
点击查看大图
计量
- 文章访问数: 201
- HTML全文浏览量: 34
- PDF下载量: 7
- 被引次数: 0