基于ABAQUS齿轮接触分析的前后处理

侯祥颖; 方宗德; 蔡香伟; 宁程丰

doi:10.13433/j.cnki.1003-8728.2015.0703

基于ABAQUS齿轮接触分析的前后处理

doi: 10.13433/j.cnki.1003-8728.2015.0703

1.
西北工业大学机电学院, 西安 710072

基金项目:

国家自然科学基金项目（51175423，51375384）资助

详细信息

作者简介:
侯祥颖（1990-），硕士研究生，houxiangying@126.com

通讯作者:
方宗德，教授，博士生导师，fauto@nwpu.edu.cn

计量
- 文章访问数: 195
- HTML全文浏览量: 23
- PDF下载量: 16
- 被引次数: 0
出版历程
- 收稿日期: 2013-12-04
- 刊出日期: 2015-07-05

Pretreatment and Post Treatment of Tooth Contact Analysis Based on ABAQUS

1.
School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China

摘要

摘要: 为了在使用ABAQUS进行齿轮接触分析时，减少手动工作量，提高结果文件的可读性，提出采用inp文件进行前处理的方法进行建模、装配和条件设置，并利用ABAQUS脚本文件对计算结果进行提取。采用Matlab等软件编写生成inp文件，并对提取的结果进行数据处理。使前处理避免了手动操作，并能在计算完成后提取齿轮重要性能参数接触印痕和应力曲线。
- 有限元分析 /
- 接触分析 /
- 前处理 /
- 后处理
Abstract: In order to reduce the hand hacking during tooth contact analysis based on Abaqus software and to improve the readability of the results, we proposed a pretreatment method for modeling, assembling and presetting conditions with input file, and a post treatment method for extracting the calculation results with script files of Abaqus software. The MATLAB software was used to program the input file and to process the extracted data. This method can avoid hand hacking in pretreatment, and extract the contact pattern and stress curve.
- ABAQUS /
- algorithms /
- bending deformation /
- boundary conditions

HTML全文

参考文献(15)

[1]	王翔,黄威,李进.基于ANSYS的复合材料齿轮的有限元分析[J].武汉大学学报,2012,58(3):215-220 Wang X, Huang W, Li J. Finite element analysis of composite gear based on ANSYS[J]. Journal of Wuhan University, 2012,58(3):215-220 (in Chinese)
[2]	唐进元,刘艳平.直齿面齿轮加载啮合有限元仿真分析[J].机械工程学报,2012,48(5):124-131 Tang J Y, Liu Y P. Loaded meshing simulation of face-gear drive with spur involute pinion based on finite element analysis[J]. Journal of Mechanical Engineering, 2012,48(5):124-131 (in Chinese)
[3]	郝东升,王德伦.斜齿轮精确接触分析有限元建模方[J].大连理工大学学报,2011,51(6):825-831 Hao D S, Wang D L. An approach to building a FEM of helical gears with accuracy contact analysis[J]. Journal of Dalian University of Technology, 2011,51(6):825-831 (in Chinese)
[4]	Litvin F L. Gear geometry and applied theory[M]. Cambridge University Press, 2004
[5]	Sheveleva G I, Volkov A E, Medyedev V I. Algorithms for analysis of meshing and contact of spiral bevel gear [J].Mechanism and Machine Theory, 2007,42(2):198-215
[6]	曹金凤,王旭春,孔亮.Python语言在Abaqus中的应用[M].北京:机械工业出版社,2011 Cao J F, Wang X C, Kong L. Application of python based on abaqus[M]. Beijing: China Machine Press, 2011 (in Chinese)
[7]	Gonzalez-Perez I, Iserte J L, Fuentes A. Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact[J]. Mechanism and Machine Theory, 2011,46(6):765-783
[8]	周岭.基于Pro/E精确建模的渐开线直齿轮应力有限元分析[D].兰州:兰州交通大学,2009 Zhou L. The Finite element analysis of stresses in involute spur gear based on the accurately modeling by Pro/E[D]. Lanzhou: Lanzhou Jiaotong University, 2009 (in Chinese)
[9]	Lin T, Ou H, Li R. A finite element method for 3D static and dynamic contact/impact analysis of gear drives[J]. Computer Methods in Applied Mechanics and Engineering, 2007,196(9):1716-1728
[10]	胡安庆.基于ABAOUS的配气机构有限元分析及其二次开发应用研究[D].杭州:浙江大学,2012 Hu A Q. The application research of valve train finite element analysis and its secondary development based on ABAOUS[D]. Hangzhou: Zhejiang University, 2012 (in Chinese)
[11]	唐进元,蒲太平.加载螺旋锥齿轮接触轨迹变化规律的研究[J].机械科学与技术,2010,29(4):461-466 Tang J Y, Pu T P. A study of contact path variation of a loaded spiral bevel gear[J]. Mechanical Science and Technology for Aerospace Engineering, 2010,29(4):461-466 (in Chinese)
[12]	祝政委.弧齿锥齿轮参数化设计及有限元分析[D].合肥:合肥工业大学,2012 Zhu Z W. Parametric design and finite element analysis of spiral bevel gears[D]. Hefei: Hefei University of Technology, 2012 (in Chinese)
[13]	罗齐汉,李成刚,厉海祥,等.齿轮弯曲强度有限元精确分析方法研究[J].机械科学与技术,2007,26(9):1212-1215 Luo Q H, Li C G, Li H X, et al. Research on accurate analysis method for bending strength of gear using finite element analysis(FEA)[J]. Mechanical Science and Technology for Aerospace Engineering,2007,26(9):1212-1215 (in Chinese)
[14]	李杰,张磊,赵旗,等.斜齿轮三维弯曲有限元模型及应力分析[J].沈阳工业大学学报,2011,33(3):265-269 Li J, Zhang L, Zhao Q, et al. hree-dimensional bending finite element model and stress analysis of helical gear[J]. Journal of Shenyang University of Technology, 2011,33(3):265-269 (in Chinese)
[15]	孟凡净,周哲波.弧齿直齿轮和斜齿轮啮合的数学建模及实体造型的实现[J].机械科学与技术,2011,30(4):656-660 Meng F J, Zhou Z B. Building the mathematical model and realizing the entity shaping for the arc tooth of vertical and inclined gears[J]. Mechanical Science and Technology for Aerospace Engineering, 2011,30(4):656-660 (in Chinese)