大推力双U型永磁同步直线电机设计及性能测试

童亮; 王大江

doi:10.13433/j.cnki.1003-8728.2015.0521

大推力双U型永磁同步直线电机设计及性能测试

doi: 10.13433/j.cnki.1003-8728.2015.0521

童亮,
王大江

1.
北京信息科技大学机电工程学院, 北京 100081

基金项目:

国家自然科学基金项目（51275053）与北京实验室项目（PXM2013_014224_000005）资助

详细信息

作者简介:
童亮（1966-），副教授，博士，硕士生导师，研究方向为先进制造技术、现代控制技术等，tongliang@tsinghua.org.cn

计量
- 文章访问数: 219
- HTML全文浏览量: 28
- PDF下载量: 9
- 被引次数: 0
出版历程
- 收稿日期: 2013-08-30
- 刊出日期: 2015-05-05

Design and Performance Test for a Large Thrust Double U-typed Permanent-magnet Linear Motor

1.
School of Electromechanical Engineering, Beijing Information Science & Technology University, Beijing 100081, China

摘要

摘要: 设计了一种应用于龙门五轴加工中心的大推力U型永磁同步直线电机，并对其性能进行了测试。结合电机使用环境和性能参数要求，对直线电机的基本尺寸、绕组形式和磁钢布置等进行了理论分析和计算；建立了该电机的有限元模型，采用有限元分析的方式对电机的静动态性能进行仿真分析，确定电机设计的最终方案并完成制造工作；应用直驱部件测试评价平台对电机的性能进行全面测试。实验测试结果满足系统的设计要求，证明了设计方法和设计过程的有效性。
- U型直线电机 /
- 永磁同步直线电机设计 /
- 有限元分析 /
- 直线电机测试实验
Abstract: A large thrust double U-typed permanent-magnet linear motor used in Bridge Type Gantry Five-axis Machining Center is studied and designed, and its performance was tested. Firstly, the linear motor's basic dimensions, form of windings and magnet arrangement based on the application environment and the requirement of motor performance parameters are analyzed and calculated. Secondly, the finite element model for motor is established on the basis of the analysis results, and the static and dynamic characteristics of the motor is studied and analyzed through the finite element method. The final design scheme for motor is determined and manufactured. Finally, the performance of motor is fully tested applying the evaluation platform for direct-drive motor component. Experimental results meet the design requirements and show the effectiveness of design method and process.
- calculations /
- controllers /
- design of experiments /
- design of permanent-magnet linear motor

HTML全文

参考文献(13)

[1]	郭庆鼎,赵希梅.数控机床直线伺服驱动控制的若千问题与展望[J].沈阳工业大学学报,2006,28(3):273-277 Guo Q D, Zhao X M. Some issues and application prospect for l inear servo motor drive control in machine tools[J]. Journal of Shenyang University of Technology,2006,28(3):273-277 (in Chinese)
[2]	林健,黄家才,汪木兰,等.DEPSO算法在永磁直线电机结构优化设计中的应用[J].中国机械工程,2012,23(24):2908-2912 Lin J, Huang J C, Wang M L, et al. Application of DEPSO algorithm to permanent magnet linear motor structure optimization design[J].China Mechanical Engineering,2012,23(24):2908-2912 (in Chinese)
[3]	Lu Q F, Cheng C Y, Zhang X M, et al.Comparative investigation of single-sided and double-sided permanent magnet linear motor[C]// 15th International Conference on Electrical Machines and Systems, Sapporo,2012
[4]	郭瑶瑶,刘成颖,王先逵.机床进给系统用永磁直线电机法向吸力的研究[J].中国机械工程,2007,18(10):1174-1177 Guo Y Y, Liu C Y, Wang X K. Study on normal force in permanent magnet linear motor in machine tool feeding system[J]. China Mechanical Engineering,2007,18(10):1174-1177 (in Chinese)
[5]	赵刚.平板式永磁同步直线电机的设计与磁阻力计算分析[D].沈阳:沈阳工业大学,2011 Zhao G. Design and detent force calculation of the plate-type PMLSM[D]. Shenyang: Shenyang University of Technology,2011 (in Chinese)
[6]	邵晓强.直线电机现状与发展方向[J].电气技术,2006,(7):58-60 Shao X Q. Current situation and developing direction of linear motor[J]. Electrical Engineering,2006,(7):58-60 (in Chinese)
[7]	刘成颖,王昊,张之敬,等.面向动态性能的永磁直线同步电机设计[J].中国机电工程学报,2011,31(33):138-143 Liu C Y, Wang Y, Zhang Z J, et al. Design of permanent magnet linear synchronous motor for dynamic performance[J]. Chinese Society of Electrical Engineering,2011,31(33):138-143 (in Chinese)
[8]	王成元,王贵子,夏加宽.机床转台直接驱动力矩电机的转矩优化设计[J].沈阳工业大学学报,2008,30(1):6-10 Wang C Y, Wang G Z, Xia J K. Torque optimization of direct drive torque motor for machine rotary table[J]. Journal of Shenyang University of Technology,2008,30(1):6-10 (in Chinese)
[9]	Ishak D, Zhu Z Q, Howe D. Permanent-magnet brushless machines with unequal tooth widths and similar slot and pole numbers[J]. IEEE Transactions on Industry Applications,2005,41(2):584-590 (in Chinese)
[10]	Zhu Z Q, Howe D. Influnce of design parameters on cogging torque in permanent magnet machines[J]. IEEE Transactions on Energy Conversion,2000,15(4):407-412 (in Chinese)
[11]	董婷,黄伟,王成元.不等齿顶宽间隔绕组对直接驱动转台电机转矩特性的影响[J].电工技术学报,2010,25(8):12-16 Dong T, Huang W, Wang C Y. Influence of unequal teeth tips width and alternate winding on torque characteristics in direct drive table motor[J]. Transactions of China Electrotechnical Society,2010,25(8):12-16 (in Chinese)
[12]	Kano Y, Matsui N. A design approach for direct-drive permanent-magnet motors[J]. IEEE Transactions on Industry Applications,2008,44(2):543-554
[13]	米春亭,罗兵,季小尹,等.永磁同步电动机空载电势最佳取值问题研究[J].西北工业大学学报,1994,12 (1):79-83 Mi C T, Luo B, Ji X Y, et al.On selection of back emf of permanent magnet synchronous motor[J]. Journal of Northwestern Polytechnical University,1994,12 (1):79-83 (in Chinese)