基于ANSYS顶升平移装置的优化设计

杨飞翔; 洪鹰; 王刚

doi:10.13433/j.cnki.1003-8728.2015.0502

基于ANSYS顶升平移装置的优化设计

doi: 10.13433/j.cnki.1003-8728.2015.0502

1.
天津大学机构理论与装备设计教育部重点实验室, 天津 300072

基金项目:

天津市自然科学基金项目（07JCZDJC099000）资助

详细信息

作者简介:
杨飞翔（1988-），硕士研究生，研究方向为机械设计与数控技术，516840086@163.com

通讯作者:
洪鹰，副教授，hying1122@126.com

计量
- 文章访问数: 154
- HTML全文浏览量: 29
- PDF下载量: 8
- 被引次数: 0
出版历程
- 收稿日期: 2013-08-19
- 刊出日期: 2015-05-05

Optimal Design of the Jack-up and Sliding System Based on ANSYS

1.
Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin 300072, China

摘要

摘要: 分析了顶升平移装置的工作特点与工作要求，重点研究了顶升系统的机械结构设计，确定了各个主要部件的结构形式与设计参数。运用三维软件SolidWorks建立了该装置的三维几何模型，将其简化后导入ANSYS Workbench有限元分析软件中，建立了有限元模型进行了应力和应变的有限元分析。针对分析结果，对相应零部件进行了优化设计，形成一套强度和刚度满足设计要求，结构设计合理的装置。
- 顶升平移 /
- 结构设计 /
- ANSYS Workbench /
- 静力分析 /
- 优化设计
Abstract: Based on the analysis of the working characteristics and requirements of the jack-up and sliding equipment, the structural design of the jack-up system is studied, and the structure of each major components and design parameters are determined. The simplified 3D geometry model for the equipment is imported into ANSYS Workbench, the stress and the strain of the relevant parts are analyzed in the working state based on the results of the analysis. Then, the optimal design was done to the corresponding components of equipment. Finally, a set of models that has a reasonable structure design and the strength and stiffness can meet the design requirements is set up.
- ANSYS Workbench /
- computer simulation /
- design /
- finite element method /
- geometry

HTML全文

参考文献(8)

[1]	刘明.大型结构物称重系统精度分析及补偿技术研究[D].天津:天津大学,2009:45-48 Liu M. The accuracy analysis and compensation technology research on the weighing system for the large structures [D]. Tianjin:Tianjin Universty,2009:45-48 (in Chinese)
[2]	谢为金,劳诚壮,蔡群.液压顶升塔应用于燃气电厂机房重型设备吊装[J].建筑机械,2006,(7):56-58 Xie W J, Lao C Z, Cai Q. Hydraulic jack-up tower is applied to the heavy lifting equipment gas room[J]. Construction Machinery,2006,(7):56-58 (in Chinese)
[3]	胡海鹤.三维网格模型简化技术研究[D].洛阳:河南科技大学,2007:38-42 Hu H H. 3D mesh model simplification technology research[D]. Luoyang:Henan University of Science and Technology,2007:38-42 (in Chinese)
[4]	王勇.基于 ANSYS Workbench 的卸船机钢结构分析[D].长春:吉林大学,2012:29-36 Wang Y. The steel structure analysis of ship unloader based on ANSYS workbench [D]. Changchun:Jilin University,2012:29-36 (in Chinese)
[5]	范钦珊.材料力学计算机分析[M]. 北京:高等教育出版社,1987 Fan Q S. Computer analysis of material mechanics[M]. Beijing:Higher Education Press,1987 (in Chinese)
[6]	陈杰.运用ANSYS Workbench快速优化设计[C]//2006用户年会论文,2006 Chen J. Quick optimization design by using ANSYS workbench[C]// 2006 User's Conference Papers,2006 (in Chinese)
[7]	王志亮,刘波,马莎莎.基于弯曲刚度和扭转刚度的白车身优化分析[J].机械科学与技术,2008,27(8):1021-1024 Wang Z L, Liu B, Ma S S. On Body-in-white optimization based on bending stiffness and torsional stiffness[J]. Mechanical Science and Technology,2008,27(8):1021-1024 (in Chinese)
[8]	黄伟,欧长松,陆海漫.龙门铣床立柱结构的有限元分析与拓扑优化[J].机械科学与技术,2012,31(1):118-121 Huang W, Ou C S, Lu H M. Finite element analysis and topology optimization for the gantry milling machine column structure [J]. Mechanical Science and Technology,2012,31(1):118-121 (in Chinese)