基于粘弹性材料标准固体模型的接触问题数值方法研究

摘要: 基于粘弹性材料标准固体模型给出了一种求解刚性滚筒以给定速度滚过粘弹性体问题的数值解法。在这一方法中，问题的解被展开成付立叶级数的形式，以标准固体模型描述粘弹性材料的力学性能，借助标准固体模型三维微分形式的本构方程来建立付立叶级数各阶系数之间的函数关系，从而在粘弹性体的边界上建立边界元方程实现问题的求解。最后，以一个移动载荷作用在粘弹性半空间上的算例验证了方法的正确性。
- 接触问题 /
- 粘弹性 /
- 标准固体模型 /
- 微分本构方程 /
- 边界元方法
Abstract: The numerical method based on the standard solid model is developed to solve the problem of a rigid cylinder rolling with any given constant speed over a viscoelastic body. In the present method, the solution is expanded into a set of Fourier series, a so-called standard solid model is used to characterize the viscoelastic properties for the viscoelastic foundation, the three-dimensional differential constitutive equations of the viscoelastic material is used to relate Fourier coefficients, and a special boundary element is developed to handle the rolling contact boundary condition. Finally, a verification example of moving pressure on the viscoelastic half space is given to validate the methodology.
- boundary element method /
- constitutive equations /
- contact problem /
- differential equations /
- Fourier series

HTML全文

参考文献(12)

[1]	Hunter S C. The rolling contact of a rigid cylinder with a viscoelastic half space[J]. Journal Applied Mechanics,1961,28(4):611-617
[2]	Spaans, C. The calculation of the main resistance of belt conveyors[J]. Bulk Solids Handling,1991,11(4):809-820
[3]	Jonkers C. The indentation rolling resistance of belt conveyors[J]. Forden und Heben,1980,30:312-318
[4]	Lodewijks G. The rolling resistance of conveyor belts[J]. Bulk Solids Handling,1995,15(1):15-22
[5]	Rudolphi T, Reicks A. Viscoelastic indentation and resistance to motion of conveyor belts using a generalized maxwell model of backing material[J]. Rubber Chemistry and Technology,2006:79
[6]	Oden J, Lin T. On the general rolling contact problem for finite deformation of viscoelastic cylinder[J]. Computer Methods Applied Mechanics Engineering,1986,57:297-367
[7]	Stanciulescu I, Laursen T. On the interaction of frictional formulations with bifurcation phenomena in hyperelastical steady state rolling calculations[J]. International Journal of Solids and Structures,2006,43:2959-2988
[8]	Qiu X J. Full two-dimensional model for rolling resistance:hard cylinder on viscoelastic foundation of finite thickness[J]. Journal of Engineering Mechanics,2006,132(11):1241-1251
[9]	Qiu X J. Full two-dimensional model for rolling resistance Ⅱ:viscoelastic cylinders on rigid ground[J]. Journal of Engineering Mechanics,2009,135(1):20-30
[10]	王繁生,侯友夫.刚性滚筒与粘弹性基础接触问题分析[J].机械设计,2010,27(12):15-17 Wang F S, Hou Y F. Analysis of contact problem of rigid cylinder on viscoelastic foundation[J]. Journal of Machine Design,2010,27(12):15-17 (in Chinese)
[11]	郭大智,任瑞波.层状粘弹性体系力学[M].哈尔滨:哈尔滨工业大学出版社,2001 Guo D Z, Ren R B. Layered viscoelastic mechanics system[M]. Harbin:Harbin Institute of Technology Press,2001 (in Chinese)
[12]	陈祖明.矩阵论引论[M].北京:北京航空航天大学出版社,1998 Chen Z M. Introduction to the theory of matrix[M]. Beijing:Beihang University Press,1998 (in Chinese)