Analysis and Optimization of Load Distribution Influence Factors of Needle Bearings
-
摘要: 建立了滚针轴承载荷分布模型,并用程序实现了其数值计算,确定了影响轴承载荷分布的4个主要因素:载荷、倾角、游隙、凸度;提出了以载荷分布均匀度作为判断轴承载荷分布的评价指标,利用二次回归正交法分析了各因素对载荷分布均匀性的影响程度,建立了各评价指标的拟合公式;基于拟合公式建立了滚针最优凸度的计算模型,获得了在载荷确定情况下的最优凸度,最后确定了轴承极限倾角。Abstract: A quasi-static analytical model for needle bearings was established and the bearing load distribution was calculated based on the model by computer program. The four key influencing factors on the bearing load distribution were determined as the loading,misalignment,clearance and crown. The uniform of load distribution is used as the evaluating indicator of bearing load distribution uniformity. Mathematical model was set up and the effect of various factors on load distribution of degree was analyzed by using quadratic regression orthogonal method.The model of optimized calculation was established based on the mathematical model,and the optimal crown and maximum angle of bearing were determined by using calculation.
-
Key words:
- calculations /
- constrained optimization /
- loading distribution /
- mathematical models
-
[1] 藤原宏树.圆柱滚子轴承部分圆弧凸度和对数凸度滚子轮廓的试验对比分析 [J].国外轴承技术，2010，(1):12-18Fujiwara H. Experimental contrast analysis of cylindricalroller bearings part arc convex degree and logarithmicconvexity roller contour[J]. Foreign Bearing Technology，2010，(1):12-18 (in Chinese) [2] 魏延刚. 圆柱滚子轴承滚动体修形技术的研究[J].润滑与密封，2003，(3):16-22Wei Y G. The research on the crowned rollers ofcylindrical roller bearings[J]. Lubrication Engineering，2003，(3):16-22 (in Chinese) [3] 袁茹，王三民. 滚子修形对轴承性能影响的研究[J].机械科学与技术，1997，16(1)Yuan R，Wang S M. Study on the effecfs of roller profile modification on the performance of roller bearings [J].Mechanical Science and Technology，1997，16(1)(in Chinese) [4] 魏延刚，王忠敏，曲荣君. 修形圆柱滚子轴承滚子凸度量设计[J]. 大连铁道学院学报，2004，25(3):23-27Wei Y G，Wang Z M，Qu R J. Design of roller crowningof cylindrical roller bearings[J]. Journal of DalianRailway Institute，2004，25(3):23-27 (in Chinese) [5] Harris T A. 圆柱滚子轴承中滚子歪斜产生的原因及影响[J]. 国外轴承技术，1999，(2):36-41T. A. Harris. The cause and influence of cylindricalroller bearings roller skew [J]. Foreign BearingTechnology，1999，(2):36-41 (in Chinese) [6] 燕小慧，李继庆.内外圈相对倾斜对圆柱滚子轴承承载能力的影响分析 [J].机械科学与技术，1996，15(1):101-104Yan X H，Li J Q. Effect of relative incline between innerand outer rings on cylindrical roller bearing [J].Mechanical Science And Technology，1996，15(1):101-104 (in Chinese) [7] 罗继伟，罗天宇. 滚动轴承分析计算与应用[M]. 北京:机械工业出版社，2009Luo J W，Luo T Y. Analysis and application of rollingbearing[M]. Beijing: China Machine Press，2009 (in Chinese) [8] 陈家庆，周海. 圆柱滚子轴承载荷分布的理论研究[J]. 轴承，2001，(6):8-11Chen J Q，Zhou H. Theoretical study on loaddistribution of cylindrical roller bearing[J]. Bearing，2001，(6):8-11 (in Chinese) [9] 中国机械工业联合会. GB/T 4604. 1-2012 滚动轴承游隙 第 1 部分:向心轴承的径向游隙[S]. 中国标准出版社，2012Chinese Mechanical Joint Industry Conference. GB/T4604. 1-2012 Rolling bearings-Internal clearance-Part 1:Radial internal clearance for radial bearings[S]. ChinaStandard Press，2012(in Chinese) [10] International Organization for Standardization. ISO-TS16281-2008 Rolling bearings-Methods for calculating themodified reference rating life for universally loadedbearings[S]. Switzerland，2008 [11] Harris T A，Kotzalas M N. 滚动轴承分析:第 1 卷:轴承技术的高等概念[M]. 北京:机械工业出版社，2010Harris T A，Kotzalas M N. Rolling bearing analysis:essential concepts of bearing technology[M]. Beijing:China Machine Press，2010 (in chinese) [12] Harris T A，Kotzalas M N. 滚动轴承分析:第 2 卷:轴承技术的高等概念[M]. 北京:机械工业出版社，2010Harris T A，Kotzalas M N. Rolling bearing analysis:advances concepts of bearing technology[M]. Beijing:China Machine Press，2010 [13] International Organization for Standardization. ISO76-2006 Rolling bearings-static load ratings[S]. Switzerland，2006 -
点击查看大图
计量
- 文章访问数: 272
- HTML全文浏览量: 43
- PDF下载量: 4
- 被引次数: 0
下载:
