整体叶盘叶栅通道电解加工的工具结构设计及试验

基金项目:

国家“863”计划重点项目(2009AA044206)

国家自然科学基金项目(51005119)

江苏省自然科学基金项目(BK2010506)资助

Cathode Structure Design and Experimental Research in Electrochemical Machining of Cascade Channels

摘要: 针对航空发动机整体叶盘叶栅通道电解加工的工具阴极开展结构设计和试验研究,分析了叶栅通道电解加工的流场特点,设计了阴极的不同电解液出液口布局,并通过有限元方法对不同结构阴极的流场进行了仿真计算。计算结果表明:采用三排孔、孔间距变化的管状阴极结构,可使电解液流场更加均匀稳定,最后通过试验对计算结果进行了验证。
- 叶栅通道 /
- 电解加工 /
- 阴极设计 /
- 流场 /
- 仿真
Abstract: In this paper the cathode structure design and experimental research in electrochemical machining of cascade channels were carried out.The characteristics of flowing field in electrochemical machining were investigated and the different outlet placements were designed.The flowing fields of cathodes with different structures were simulated by finite element method and the results showed that the tubular structure using multi-line holes and gradual changing pitches could make the flowing field more steadily.The simulation results were verified by experiments.
- cascade channels /
- electrochemical machining /
- cathode design /
- flowing field /
- simulation

[1]	孙春华,朱荻,李志永等.考虑流场特性的发动机叶片电解加工阴极设计及数值仿真[J].东南大学学报,2004,34(5):613～617
[2]	Xu Z Y,et al.Study on flow field of turbine blade with flexible 3-electrode feeding method in ECM[A].Proceedings of Interna-tional Technology and Innovation Conference[C],2006
[3]	Vladimir M.et al.Mathematical modelling of three-dimensionalelectrochemical forming of complicated surfaces[J].Journal ofMaterials Processing Technology,2001,109:314～319
[4]	李志永,朱荻.基于叶片电解加工电场和流场特性的阴极设计及工艺试验研究[J].中国机械工程,2006,17(14):1463～1466
[5]	张永俊,徐家文.展成电解加工中的内喷式阴极设计[J].电加工,1993,(5):23～25
[6]	郭紫贵,云乃彰,张磊.带冠整体叶轮数控展成电解加工阴极的设计[J].电加工与模具,2004,(1):19～21