一种新型3-UrSR六自由度并联机构的位置与作业空间分析

Position and Workspace Analysis of a Novel Parallel Mechanism Named 3-UrSR with Six Freedoms

1.
Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016;
2.
Mechanical Department, Nanjing College of Chemical Technology, Nanjing 210048;
3.
School of Automotive and Traffic Engineering, Jiangsu University, Zhenjiang 212013

摘要: 机构的位置和空间分析是分析和研究机构的基础,文中提出一种新型3-UrSR并联机构,采用球面2自由度五杆作为驱动装置;对机构的自由度进行了计算,对该机构的位置反解进行了分析,并用Matlab软件解析得到8组解并对其对应图形进行了绘制,最后用实例对反解进行了验证,并给出了该机构的空间求解算法和图形。
- 并联机构 /
- 位置反解 /
- 空间分析 /
- 六自由度
Abstract: Position and workspace analysis of mechanism is the basics for study and research of mechanism.In this paper,a novel parallel mechanism named 3-UrSR was proposed.It used 2-DOF spherical five-bar mechanism as the compound drive device.The mechanism freedoms was calculated,and the inverse solution of position of the mechanism was analyzed.Using Matlab software eight groups of inverse solution were determined and its figure was dipicted.At last a numerical simulation example of a mechanism with its workspace arithmetic and figure to verify the feasibility and correctness of the inverse solution.
- parallel mechanism /
- position inverse solutions /
- workspace analysis /
- six freedoms

[1]	高峰.机构学研究现状与发展趋势的思考[J].机械工程学报,2005,41(8):3～17
[2]	Stewart D.A platform with six degrees of freedom[A].Proceed-ing Institution of Mechanical Engineers[C],1965,180:371～386
[3]	Salcudean S E,et al.A six degree-of-freedom,hydraulic,oneperson motion simulator[A].IEEE Conference on Roboticsand Automation[C],1994:2437～2443
[4]	Cleary K,Brooks T.Kinematics analysis of a novel 6-DOFs par-allel manipulator[A].IEEE International Conference on Ro-botics and Automation[C],1993:708～713
[5]	Chen S L,et al.Analytical modelling of manufacturing errors onthe accuracy for TRR-XY hybrid parallel link machine tool[A].Proceedings of the Institution Mechanical Engineerings[C],Part13:Journal of Engineering Manufacture,2001,215:1203～1216
[6]	Valenti M.Machine tools get smarter[J].ASME MechanicalEngineering,1995,17:70～75
[7]	黄秀琴等.一种改进型三平移并联机构的运动学研究[J].机械科学与技术,2006,23(3)
[8]	吴光中等.3-PUU型平动并联机构的运动学分析[J].中国机械工程,2004,5(9)
[9]	胡福生,郝秀清.3PSS并联机构的运动学分析[J].山东理工大学学报,2006,1(1):1672
[10]	高征,高峰.6自由度3-UrRS并联机构的位置正解分析[J].机械工程学报,2007,43(12):171～177