Modifying Gear Shape Coupled with Housing Stiffness
-
摘要: 为提高齿轮的啮合质量,提出了考虑箱体刚度的齿轮修形参数确定方法。建立齿轮轴刚度简化算法,求解齿轮轴弯扭组合变形,确定齿向修形参数初值。在ANSYS中建立带轴段的齿轮接触分析模型,对齿轮啮合刚度做有限元仿真,综合齿向修形确定齿廓修形参数初值。给出箱体刚度阵的简化提取方法确定箱体变形,并耦合到齿轮轴上,以齿面载荷均布为目标优化齿轮修形参数。仿真效果显示:修形后的齿面载荷分布改善明显,验证了修形参数确定方法的有效性。Abstract: To improve tooth pair meshing quality,we propose a method for determining the parameters for gear shape modification,which takes the housing stiffness into consideration.We establish the simplification algorithm for calculating gear shaft bending and torsional stiffness so as to determine the initial values of parameters of the longitudinal gear shape modification.We use the ANSYS to establish the finite element model for analyzing the contact of gears with a shaft.Using the finite element model,we simulate the gear meshing stiffness and determine the initial values of the parameters of involute modification and longitudinal modification without considering housing stiffness.Finally we propose our simplification algorithm for extracting the housing stiffness matrix,which is then coupled with the gear shaft,thus optimizing the gear shape modification parameters coupled with housing stiffness.The simulation results show that our method can greatly improve the load distribution on tooth surface,indicating that our method is effective.
-
Key words:
- gear shape /
- involute modification /
- longitudinal modification /
- housing stiffness /
-
[1] 唐增宝,陈久荣.齿轮动态性能最佳的齿廓修形曲线和参数[J].华中理工大学学报,1995,23(11):52～55 [2] 刘鹄然,朱孝录.齿轮在弯扭偏载下的齿向修形[J].机械,1993,20(4):15～18 [3] 方宗德,张永才.斜齿轮的齿廓修形[J].汽车工程,1993,15(1):59～64 [4] Chen Y C,et al.Stress analysis of a helical gear set with local-ized bearing contact[J].Finite Elements in Analysis and De-sign,2002,38:707～723 [5] 仙波正庄.高强度齿轮设计[M].北京:机械工业出版社,1981 [6] 李润方.齿轮传动的刚度分析和修行方法[M].重庆:重庆大学出版社,1998 [7] Dejl Z,Moravec V.Modification of an involute gearing and itseffect on a loading capacity[A].Proceedings of the ASME2007 International Design Engineering Technical Confer-ences and Computers and Information in Engineering Con-ference[C],2007,USA [8] Matsuda T,Sato M,Matsui S.Optimum tooth-surface modificationfor axis-displaced involute helical gear drive with parallel axes[A].Proceedings of the ASME2007 International Design En-gineering Technical Conferences and Computers and Informa-tion in Engineering Conference[C],2007,USA [9] 王统,李伟.齿轮轴3D综合弹性变形和齿向修形曲线的研究[J].上海交通大学学报,1993,27(1):64～72 [10] 詹东安,王树人等.高速齿轮齿部修形技术研究[J].机械设计,2008,8(8):8～10 [11] 陈霞,汪姣,夏巨谌等.直齿圆锥齿轮修形仿真[J].机械科学与技术,2009,28(3):386～391 [12] 易建军,杨涛,周锦进等.用神经网络求实时控制的电化学齿轮修形过程的施电规律[J].机械科学与技术,2001,20(1):102～106 [13] 赵均海,汪梦甫.弹性力学及有限元[M].武汉:武汉理工大学出版社,2008 [14] 万艳丽.基于ANSYS耦合箱体刚度的齿轮修形研究[D].大连理工大学,2010 -
点击查看大图
计量
- 文章访问数: 219
- HTML全文浏览量: 24
- PDF下载量: 7
- 被引次数: 0
下载:
