Optimal Design of a Novel Type 3-SPS/CR Parallel Mechanism
-
摘要: 提出了一种能实现空间两维转动和沿Z轴移动的机构模型——空间3-SPS/CR并联机器人机构模型,其中SPS支链为驱动支链,CR为恰约束从动支链。利用构型演变与约束综合理论对该并联机构进行了型综合,采用螺旋理论分析了3-SPS/CR并联机构实现空间两转一移运动的机构学原理,计算了其自由度,给出了其位置正解和反解的方法,导出了Jacobian矩阵,分析了工作空间;提出了以该机构的灵巧度、承载力性能的加权综合最优为目标函数,采用遗传算法对该机构的结构参数进行了优化,并将优化结果运用到该机构的设计中,通过算例与仿真验证了该优化方法的正确性。Abstract: A novel 3-SPS/CR spatial parallel mechanism that can perform two-dimensional rotations and translationfor Z axis is presented, the SPS-limp and CR-limp are regarded as the driver and driven. The parallel mechanism is synthesized by the configuration evolution and the constraint synthesis theory. The principles for motions are ana-lyzed based on the screw theory, the degree of freedom is calculated, the forward and reverse solutions of position analysis were presented, the Jaeobian matrix and the workspace were analyzed. The optimal objective function is presented about weight eomposite of dexterousness and capacity performance, the structure parameters of the mech-anism are optimized with genetic algorithm and the optimization results are applied to design of mechanism. Lastly this method is verified through real examole and simulation.
-
Key words:
- parallel mechanisms /
- type synthesis /
- the degree of freedom /
- workspace /
- genetic algorithm
-
[1] Tsal L W.Kinematics of a three-DOF platform with extensiblelimbs[A].Recent Advances in Robot Kinematics[M],Klu-wer Academic Publishers,1996 [2] Lu R,Mills J K,Dong S.Experimental comparison of controlapproaches on trajectory tracking control of a 3-DOF parallel ro-bot[J].IEEE Transactions on Control Systems Technology,2007,5(15):982～988 [3] Mustafa M,Misuari R,Daniyal H.Forward kinematics of 3degree of freedom delta robot[A].5th Student Conference onResearch and Development[C],2007:1～4 [4] 范彩霞,刘宏昭,张彦斌.基于构型演变和李群理论的2T2R型四自由度并联机构型综[J].中国机械工程,2010,21(9):1101～1105 [5] 黄真,李秦川.少自由度并联机器人机构的型综合原理[J].中国科学(E辑),2003,33(9):813～819 [6] 王庚祥,原大宁,刘宏昭等.空间4-SPS/CU并联机构运动学分析[J].农业机械学报,2012,43(3):207～212 [7] 刘永均,张静,李柏林.基于条件数的3-RRS并联机器人运动性能优化[J].机械设计与研究,2008,24(6):32～34 [8] 刘冰,李剑锋,费仁元.基于遗传算法的并联微动机器人的机构优化设计[J].中国机械工程学报,2007,18(5):554～559 [9] 刘玉旺,余晓流,储刘火,马欣艺.并联机构工作空间及参数优化研究[J].机械科学与技术,2006,25(2):184～188 [10] 周兵,杨汝清.3自由度平动并联机构结构参数的优化[J].机械设计与研究,2002,18(5):25～27 [11] 周明,孙树栋.遗传算法原理及应用[M].国防工业出版社,1999 -
点击查看大图
计量
- 文章访问数: 194
- HTML全文浏览量: 18
- PDF下载量: 4
- 被引次数: 0
下载:
