Simulating Working Device of Wheel Loader
-
摘要: 利用CATIA 3D建模软件,建立DL503型装载机工作装置三维模型,通过转化文件格式导入ADAMS环境中,进行工作装置连杆系统的仿真研究。确定模型关键点为参数化设计变量,以铲斗平移性为目标函数,同时建立边界约束函数和性能约束函数。进行模型的优化分析,求解出工作装置连杆机构最优设计方案,得到铲斗平动性的优化曲线,大大降低铲斗摆动角度,改善铲斗平移性指标。Abstract: By using CATIA software, 3D model of DL503 working devices was established. Then in order to simu-late whole working device system,we converted the 3D model document into an acceptable type to import in AD-AMS environment. To optimize the bucked translation,firstly,key points of the model were defined as design vari-ables and bucket translation as objective function. Secondly,boundary constraint functions and performance con-straint functions were established. Finally,by optimization analysis,the optimized scheme and curves for buckettranslation were obtained. From the curves,we can see that bucket swing angle has been greatly reduced,andtranslation performance has been improved.
-
Key words:
- wheel loader /
- working devices /
- simulation /
- bucket translation
-
[1] 杨占敏,王智明,张春秋. 轮式装载机[M]. 化学工业出版社,2006 [2] 张松青,杜潜. 轮式装载机工作装置结构参数优化设计[J].拖拉机与农用运输车,2007,(5):82~83 [3] 申文清,王金刚,关志刚等. 轮式装载机工作装置的建模及优化研究[J]. 土石方机械与施工技术,2006,(4):43~45 [4] 高秀华,王云超,安二中,韩佳伟. 基于 ADAMS 的装载机工作装置优化[J]. 计算机仿真,2007,(1):217~221 [5] 杨卫平,赵益乔. 装载机工作装置的优化及运动仿真设计[J].矿山机械,2002,(5):24~26 [6] 迟永滨,孙大刚. 最优化设计控制方法及其在装载机设计中的运用[J]. 矿山机械,2001,(2):19~22 [7] 张国胜. 装载机工作装置铰点位置优化模型及软件[J]. 工程机械,1999,(12):15~18 [8] 张春华. 装载机工作装置六连杆机构优化设计[J]. 机械研究与应用,2005,(8):55~57
点击查看大图
计量
- 文章访问数: 296
- HTML全文浏览量: 19
- PDF下载量: 3
- 被引次数: 0