剪叉式升降机举升机构分析与优化

基金项目:

中央高校基本科研业务费专项资金项目(133204001)

武汉市青年科技晨光计划项目(201271031417)资助

Analysis and Optimization for Lifting Mechanism of Scissor-fork Lifter

1.
School of Mechanical and Electric Engineering,Wuhan University of Technology,Wuhan 430070

摘要: 描述了剪叉式升降机举升机构整体运动情况,然后分别针对举升油缸、升降平台的运动过程进行了详细分析;通过举升机构的受力分析,得到了受力最大的绞点;最后通过对剪叉杆的强度进行校核和对举升油缸的安装位置进行调整,提出了该机构的结构优化方案,经现场实测验证,经优化后不仅提高了举升机构的稳定性,机构对油缸的推力要求也得到了大幅降低。
- 剪叉式升降机 /
- 举升机构 /
- 结构优化
Abstract: Key structure parameters were verified and optimized through Kinematic analysis and mechanical analysis for the lifting mechanism of a common scissor-fork lifter.The whole movement of the mechanism was described firstly, and then detailed analysis was performed for the lift cylinder and the lifting platform.The maximum stress point was obtained through load bearing analysis for the lifting mechanism.Finally, optimizing scheme was presen-ted based on strength checking for the scissor rod and adjusting installation point of the lift cylinder.The results of in-situ test showed that the stability of lifting mechanism was improved and the demand on the driving force of hy-draulic cylinder was greatly reduced.
- optimization /
- mechanisms /
- scissor-fork lifter

[1]	齐文虎.液压缸双梁铰接式剪叉升降平台布置方式优化设计 [D].兰州理工大学,2011
[2]	於又玲,刘明春,曾志钢等.剪叉式升降机液压系统的设计[J].液压与气动,2008,(11):25～27
[3]	孙光旭,袁端才.液压剪叉式升降台的动力学仿真[J].系统仿真学报,2010,22(11):2650-2653
[4]	宋耀军.液压缸驱动的剪刀撑结构运动及动力学分析[J].起重运输机械,2004,(2):41～43
[5]	张介民.剪叉式升降机构液压缸驱动力计算[J].工程机械,1990,(12):18～22
[6]	Trauis Langbecker.Kinematic analysis of deployable scissor struc-tures[J].International Journal of Space Structures(S0266-3511),1999,14(1):1～15
[7]	刘宏光.剪叉式升降平台建模及关键参数研究[J].机电工程技术,2005,34(7):20～22