Optimization Design of Planetary Mechanism Shafts for Wheel-legged Lunar R over
-
摘要: 针对基于二级半转机构的轮腿式月球车,建立其虚拟样机模型,通过典型路况下的动力学仿真获得月球车轮腿行星机构各轴系的力学数据。在此基础上,建立轮腿行星机构各轴系的有限元分析模型,并进行应力分析计算。基于ANSYS参数化设计语言APDL,基于最小二乘逼近优化方法对轮腿行星机构轴系进行了优化设计。优化后的轴系不仅满足强度要求,而且质量比原来降低约30%,这为优化月球车轮腿结构提供了一种新的有效途径和方法。Abstract: The virtual prototype model is established for the wheel-legged lunar rover based on double-half-revolution mechanism, and its mechanical data of wheel-leg planetary mechanism shafts are obtained by dynamic simulation under some typical road conditions. On this basis, its finite element analysis model is established, and the stress of the wheel-leg planetary mechanism shafts is analyzed by using ANSYS software. Based on ANSYS parametric design language (APDL), the optimization design for the above shafts are done combined with the least-square approxima-tion optimization method. The results show that the optimized shafts not only meet the strength requirement, but also their weights are about 30% lower than the original design, which will provide a new and effective way for optimizing the whole wheel-leg structure of lunar rover.
-
Key words:
- stress analysis /
- computer simulation /
- computer software /
- constrained optimization /
- design
-
[1] Wang Y M,Yu X L,Tang W C.A new-type wheel-legged lunar rover and its mobile performance analysis[A].In: The 2009 In-ternational Conference on Mechanical and Electrical Technol-ogy[C],ASME Press,New York,USA,2009:31~36 [2] 余晓流,骆辉,夏伟.基于半转机构的月球车移动系统及运动 学分析[J].中国机械工程,2008,19(24):2926~2929 [3] 汪永明,余晓流.二级半转机构运动特性分析及其轮腿构型设 计[J].机械工程学报,2011,47(23):49~55 [4] 汪永明,余晓流,汤文成.仿生轮腿式月球车运动学建模与虚拟 样机仿真分析[J]. 机械科学与技术,2010,29(9):1158~1162 [5] 钟佩思,王景林,刘梅.基于有限元的传动轴受扭分析[J].机 械传动,2008,32(5):88~91 [6] 吴卫东,郭昌利,李华亮.采煤机摇臂转矩轴的有限元分析[J]. 机械传动,2012,36(4):84~86 [7] 刘峰,李华,姚进.齿轮轴参数化有限元分析系统的开发[J]. 机械设计与制造,2011,18(11):117~119
点击查看大图
计量
- 文章访问数: 191
- HTML全文浏览量: 36
- PDF下载量: 5
- 被引次数: 0