|
|
:2014,Vol:19,Issue(4):193-198 |
|
|
Citation: |
|
|
LI Ya-bo, PANG Jiang. Taper Analysis of Work-piece with Lathe Spindle Angular Swinging[J]. International Journal of Plant Engineering and Management, 2014, 19(4): 193-198 |
|
|
|
|
|
|
|
| Taper Analysis of Work-piece with Lathe Spindle Angular Swinging |
|
| LI Ya-bo1 |
|
1. School of Mechanical and Electrical Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, P.R.China;
2. Grove School of Engineering, City College of New York, New York 10031 |
| Abstract: |
| This thesis focuses on a general lathe spindle,quantitatively analyzes the machining precision with spindle swinging in geometry way and derives a mathematical expression of machining errors at different swing frequencies. By applying MATLAB to simulate the work pieces' cross-section at different swing frequencies,taper is analyzed and variation law is summarized. |
| Key words:
spindle
angular swing
swing frequency
MATLAB
taper
|
|
| Received: 2014-10-12
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2014.0401 |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Zhang X J. Elementary technology of exchang-eability measurement [M]. Beijing: TsinghuaUniversity Press, 2013 (in Chinese)
[2] Wang X K. Technology of mechanical manufacture[M]. Beijing:Machinery Industry Press, 2013 (inChinese)
[3] Yan S T,Chen H X. Mathematical analysis ofthe machining spindle movement [J ].Mechanical Design and Manufacturing, 1999(2):40-42 (in Chinese)
[4] Yu X W. Mechanical manufacturing engineering[M]. Harbin: Harbin Institute of TechnologyPress, 2011 (in Chinese)
[5] Wen X L, Lin S etc.Ultra precision machiningtechnology and equipment [M]. Beijing:Chemical Industry Press,2006 (in Chinese)
[6] Compilation group of"Mechanical DesignManual". Mechanical design manual.2[M].Beijing:Machinery Industry Press,1978 (inChinese) |
|
|
|
|
|
|
|
