Articles:2017,Vol:22,Issue(4):222-226
Citation:
LI Zhao-can. Engineering Application and Development of Anti-skid Sand[J]. International Journal of Plant Engineering and Management, 2017, 22(4): 222-226

Engineering Application and Development of Anti-skid Sand
LI Zhao-can
Shandong University of Science and Technology, Shandong Tai'an 271019, China
Abstract:
In view of the increasing cement concrete pavement in China, the proportion of road non-slip surface layer is large, the winter slippery performance is insufficient and the later non-slip treatment is difficult. Through the concrete construction and post-application and development of the anti-skid sand in the road and bridge, the feasible anti-skid optimization measures are put forward.
Key words:    anti-skid sand    cement concrete pavement    road anti-slip surface layer    later non-slip treatment    optimation to improve   
Received: 2017-04-20     Revised:
DOI: 10.13434/j.cnki.1007-4546.2017.0404
Corresponding author:     Email:
Author description: LI Zhao-can is an undergraduate in Shandong University of Science and Technology. His research interest is civil engineering. 317657787@qq.com
Service
PDF(67KB) Free
Print
Authors
LI Zhao-can

References:
[1] Li R, Pei J Z. Design of small stone asphalt mixture based on anti-skidding performance[J]. Journal of Wuhan University of Technology(Materials Science Edition), 2012,(4):789-793(in Chinese)
[2] Kehagia F. Skid resistance performance of asphalt wearing courses with electric arc furnace slag aggregates[J]. Waste Management and Research,2009,27(3)
[3] Zhong Y Q. Research on properties of polymethyl methacrylate colored non-slip surface coating[C]//Proceedings of 20154th International Conference on Mechatronics,Materials,Chemistry and Computer Engineering (ICMMCCE 2015). International Informatization and Engineering Associations、Atlantis Press, 2015:4
[4] Hou X D, Jiang Z G. Fuzzy fault tree analysis method for assessing dustproof water supply network failure in mine[C]//Proceedings of the International Symposium on Safety Science and Technology. Shenyang, 2008,6(in Chinese)