|
|
Articles:2017,Vol:22,Issue(2):65-72 |
|
|
Citation: |
|
|
ZHENG Guang-hua, LI Jia-lin, TIAN Xue, LEI Zi-han. Vibration Modal Analysis of Compressor Blade based on ANSYS[J]. International Journal of Plant Engineering and Management, 2017, 22(2): 65-72 |
|
|
|
|
|
|
|
| Vibration Modal Analysis of Compressor Blade based on ANSYS |
|
| ZHENG Guang-hua, LI Jia-lin, TIAN Xue, LEI Zi-han |
|
| School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, P. R. China |
| Abstract: |
| Compressor is an important part of aero engine. In the environment of high temperature and high pressure, compressor blade will suffer from several physical and chemical processes, such as centrifugal force, aerodynamic force vibration and oxidation. These processes will lead compressor blade to fatigue fracture, and at the same time, make negative effects on the engine's overall performance. Based on the software ANSYS15.0, we made strength analysis and modal analysis of compressor blade in this paper. As a result, we got its natural frequencies, relevant modal parameters and vibration mode cloud pictures. After analyzing the influence that centrifugal force made on modal parameters, we predicted the expected damage of the blade. Eventually the analysis results will provide the basis for overall performance evaluation, structural crack detection, fatigue life estimation and strength calculation of aircraft engine compressor. |
| Key words:
compressor blade
centrifugal load
the modal analysis
natural frequency
vibration performance
|
|
| Received: 2017-01-06
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2017.0201 |
| Corresponding author:
Email： |
Author description: ZHENG Guang-hua is a doctor candidate in school of power and energy, Northwestern Polytechnical University. His research interest is the analysis and research of the aviation turbomachinery. zhengguanghua@nwpu.edu.cn
LI Jia-lin is a bachelor candidate in school of power and energy, Northwestern Polytechnical University.He majors in aircraft power engineering. 15991661334@163.com
TIAN Xue is a bachelor candidate in school of power and energy, Northwestern Polytechnical University. Her research interest is aircraft power engineering. tianxue @nwpu.edu.cn
LEI Zi-han is a bachelor candidate in school of power and energy, Northwestern Polytechnical University. Her research interest is aircraft power engineering. leizihan@nwpu.edu.cn
|
|
|
|
|
|
|
|
References: |
|
|
[1] Huang J Y. Finite element modeling and dynamic characteristics analysis of engine structure[D]. Taiyuan:North University of China, 2000(in Chinese)
[2] Subrahmanyam K B, Kulkarni S V, Rao J S. The coupled bending-bending vibration of pre-twisted cantilever blading allowing for shear deflection and rotary inertia by the reissner method[J]. International Journal of Mechanical Sciences, 1981,23(9):517
[3] Fang Y Q, Chen A N, Dong W P. Vibration modal analysis technique[M]. Beijing:National Defense Industry Press (in Chinese)
[4] Wang Z J. Analysis of sympathetic vibration and model state for cam set based on ANSYS[J]. The Development and Innovation of Mechanical and Electrical Products, 2007, 20(1):127-128(in Chinese)
[5] Han D J, Wang W D. Recent research progress of structural damage identification method based on vibration[J]. Journal of South China University of Technology(Natural Science Edition), 2003, 31(1):91-96(in Chinese)
[6] Li Z, Huang J, Li Z. Stability criterion and pattern planning for human oid running[C]. Robotics and Auto-mation, 2004. Proceedings of the IEEE International Conference on. IEEE, 2004:1059-1064
[7] Li S M, etc. Structure and system of civil aviation gas turbine engine[M]. Beijing:Weapon Industry Press, 2005(in Chinese)
[8] Xiao J F, Zhu B T. Study on the sensitivity of blade vibration characteristics of steam turbine blade to root constraint condition[J]. Thermal Power Generation, 1999,(1):29-32(in Chinese)
[9] Liu H. ANSYS15.0 Finite element analysis from entry to the master[M]. Beijing:China Machine Press, 2014(in Chinese)
[10] Niu D Z, Fan Q T. Study on vibration characteristics of axial flow fan impeller with ANSYS software[J]. Fan technology, 2000,14(5):29-30(in Chinese)
[11] Zhang J W, Bai H B, Li X, ANSYS15.0 Super learning handbook[M]. Beijing:Posts and Teleam Press, 2013(in Chinese)
[12] Du Z X, Han S H, Liu Y Q, et al. Study on strength and vibration of fluid solid coupling in compressor blades[J]. Vibration, Testing and Diagnosis, 2006, (6):12-18(in Chinese) |
|
|
|
|
|
|
|
