|
|
Articles:2015,Vol:20,Issue(4):233-239 |
|
|
Citation: |
|
|
JING Ping-an, WANG Zhong-min. Study on Finite Element Analysis of a Folding Crane Based on ANSYS Workbench[J]. International Journal of Plant Engineering and Management, 2015, 20(4): 233-239 |
|
|
|
|
|
|
|
| Study on Finite Element Analysis of a Folding Crane Based on ANSYS Workbench |
|
| JING Ping-an, WANG Zhong-min |
|
| School of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin 300222, P. R. China |
| Abstract: |
| Folding crane is a kind of commonly used small crane, because of its unique use of convenience, low cost, then folding crane structure research is particularly important. This paper takes a folding crane as a research object, establishes its 3D model in SolidWorks software, and then import this model to ANSYS Workbench. Through statics analysis, a fold-down stress and strain situation of crane is acquired, it provides a basis for stucture optimization of the folding crane. |
| Key words:
folding cranes
finite element analysis
ansys workbench
|
|
| Received: 2015-11-19
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2015.0404 |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Wang J Y, Lian M Z. Optimization design of a simple car crane based on ANSYS workbench [J]. Mechanical Engineer, 2013, 4 (4): 64-66 (in Chinese)
[2] An X. The finite element analysis of U type bolt strength of heavy vehicle [J]. Mechanical Design and Manufacture, 2012,11(8): 231-232 (in Chinese)
[3] Wang X F. Structural analysis and optimum design of gantry crane [D]. Zhengzhou: Zhengzhou University, 2014 (in Chinese)
[4] Xiong Y X. Simulation technology and implementation based on UG and ANSYS Workbench [J]. Journal of Zhejiang industrial and Commercial College of Technology, 2006,3(4):60-61 (in Chinese)
[5] Yang J, Li W M, Liu Y H. Finite element analysis of the crane boom of the motor vehicle [J]. Journal of Liaoning University of Technology, 2007,27 (3):195-197 (in Chinese)
[6] Xu B. QY25 type truck crane design [D]. Dalian: Dalian University of Technology, 2003 (in Chinese)
[7] Guo K X, Li G Z. Research and development of the parametric design system of the truck crane boom [J]. Engineering Graphics, 2010(6):80-84 (in Chinese) |
|
|
|
|
|
|
|
