|
|
Articles:2022,Vol:21,Issue(2):117-128 |
|
|
Citation: |
|
|
WEI Xieben. Design on Online Fault Diagnosis System of Stealmaking Gas Dedust Fan[J]. International Journal of Plant Engineering and Management, 2022, 21(2): 117-128 |
|
|
|
|
|
|
|
| Design on Online Fault Diagnosis System of Stealmaking Gas Dedust Fan |
|
| WEI Xieben |
|
| Shantou Polytechnic, Shantou 515000, Guangdong, China |
| Abstract: |
| The study introduces the meanings of the technology on dedust fan's online detection and fault diagnosis, the ways of fault diagnosis, the common fault analysis and the design of stealmaking gas dedust fan's online fault diagnosis. It shows the whole system's design, establishment and functional test. XM series modules have been used to realize the online fault diagnosis. The system's functional requirements are proved by experiment. |
| Key words:
dedust fan
online detection
fault diagnosis
entek XM
|
|
| Received: 2022-03-23
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2022.0204 |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] CHEN J G. Research on engine vibration and noise under multiple operating conditions[J]. Machine Tool&Hydraulics, 2021,12(24):83-87(in Chinese)
[2] WEI J Z, ZHANG J L, JIA Z T. Application of vibration monitoring technology in fault diagnosis of gear mechanism[J]. Industrial Technology&Vocational Education, 2019,17(4):7-8(in Chinese)
[3] DING B H, LI Z F. The summary of vibration signal processing methods in fault diagnosis of gear box[J].Coal Mine Machinery, 2005(8):136-138(in Chinese)
[4] CUI Y J.Research on vibration characteristics and diagnosis strategies of typical gearbox faults[J].Tianjin Metallurgy, 2004(5):27-30(in Chinese)
[5] WEI W G. Coupled vibration characteristic analysis of an aero engine two-stage fuel pump[J]. Machine Tool&Hydraulics, 2021,9(18):153-159(in Chinese)
[6] GONG Z L, SU Z X. Research on vibration characteristics of flexible rotating shaft of deep through hole keyway milling machine[J]. Machine Tool&Hydraulics, 2021,11(22):76-80(in Chinese)
[7] LIU Y J, YU K, PANG G D, et al. Research on the start-stop process resonance control for hydraulic vibration hammer based on LabVIEW[J]. Machine Tool&Hydraulics, 2021,11(22):34-38(in Chinese)
[8] WEI X B. Vibration analysis of nc punch and study on buffering system[J]. Machine Tool&Hydraulics, 2018,7(14):47-49(in Chinese) |
|
|
|
|
|
|
|
