|
|
Articles:2019,Vol:24,Issue(4):243-250 |
|
|
Citation: |
|
|
WEI Xieben, CAO Yanbin, SUN Peiming. Design of Vibration Monitoring System of CNC Machine[J]. International Journal of Plant Engineering and Management, 2019, 24(4): 243-250 |
|
|
|
|
|
|
|
| Design of Vibration Monitoring System of CNC Machine |
|
| WEI Xieben, CAO Yanbin, SUN Peiming |
|
| Jieyang Vocational and Technical College, Guangdong Jieyang 522000, China |
| Abstract: |
| CNC machine have a fast development and is widely used in China. Generally, CNC machine tool, includs CNC lathes and CNC milling machine. CNC machine tool is a necessary tool for machining. It plays an important role in the mechanical design and machining fields. CNC machine tool is mainly composed of two parts of the machine body and the computer control system. Mechanical equipment failures usually related information such as vibration, sound, pressure, temperature performance. CNC machine tool vibration monitoring system with piezoelectric accelerometer, the eddy current displacement sensor, signal amplifier, signal conditioning modules. We can take an advantage of the CNC machine tool vibration monitoring system for vibration monitoring and fault diagnosis of CNC machine tools. |
| Key words:
CNC machine
virtual instrument
mechanical vibration
monitoring system
test
|
|
| Received: 2019-11-25
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2019.0405 |
| Funds: This paper is supported by 2017 Jieyang Science and Technology Innovation and Development Special Fund Project(2017xm014) and 2018 Key Scientific Research Platform and Project of Guangdong Universities(2018GkQNCX079). |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Sun W, Zhang W Y, Yuan C, et al. Application of vibration in fault diagnosis of nc machine tools[J]. Mechanical Research and Application, 2004,(3):31-32(in Chinese)
[2] Liu Y Y, Zheng W. Research and application of cnc machine tool vibration test system[J]. Electrical and Mechanical Engineering Technology, 2012,39(2):23(in Chinese)
[3] Zhang R Q, Zhou G W. Analysis of electro-hydraulic proportional valve-controlled cylinder system based on LabView[J]. Machine Tool and Hydraulics, 2009,(4):106-108(in Chinese)
[4] Sun H Q. CNC machine tool maintenance technology[M]. Beijing:Machinery Industry Press, 2001(in Chinese)
[5] Ren J P, Bai E Y. Modern CNC machine failure diagnosis to diagnosis and maintenance[M]. Beijing:National Defence Industry Press, 2002(in Chinese)
[6] Shen Q G, Zheng S Y. Equipment fault diagnosis[M]. Beijing:Chemical Industry Press, 2003(in Chinese)
[7] Zhang C F, Zheng W. Mechanical and electrical equipment diagnosis and maintenance[M]. Beijing:Machinery Industry Press, 2006(in Chinese) |
|
|
|
|
|
|
|
