|
|
:2014,Vol:19,Issue(4):246-250 |
|
|
Citation: |
|
|
CAI Chang-liang, TANG Shu-feng, QIU Hong-ran. Structure Design of the Mobile Cutting Machine Tool Based on Pro/Engineer[J]. International Journal of Plant Engineering and Management, 2014, 19(4): 246-250 |
|
|
|
|
|
|
|
| Structure Design of the Mobile Cutting Machine Tool Based on Pro/Engineer |
|
| CAI Chang-liang1 |
|
1. School of Mechanical Engineering, Inner Mongolia University of Technology, Hohhot, 010051, P.R.China;
2. Inner Mongolia Electric Power Research Institute, Hohhot, 010020, P.R.China |
| Abstract: |
| In order to solve the existing problems of current metal cutting equipment,combined with the development situation of metal cutting industry in China,on this basis,a design can realize multi-shaped metal cutting machine tool. Introduces the working principle of the machine tool,the structure and parameters of the main component,and the establishment of the model by using the 3D modeling software Pro/Engineer( Pro/E);through listing the advantages of the mobile machine,shown that the metal machine tool has the structural characteristics of mobile,semi automated,can improve the cutting precision,increase cutting efficiency,and the utility market has certain value. It has guiding significance for the further study and the potential applications of the mobile cutting machine tool. |
| Key words:
metal cutting industry
mobile cutting machine tool
working principle
Pro/E
|
|
| Received: 2014-09-14
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2014.0409 |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Guo L J,Chao W Y,Bin L,et al. Kinematics analysis of a robotic rock grinder[J]. Chinese Science Bulletin,2007, 52 (23):3229-3304 (in Chinese)
[2] Bei Z,Can F Y. Grinding of brittle materials with brazed diamond grinding wheel[J]. The International Journal of Advanced Manufacturing Technology,2013, 67(9/12):2845-2852 (in Chinese)
[3] Devrient M, Knoll B, Geiger R. Laser transmis-sion welding of thermoplastics with dual clamping devices [J]. Physics Procedia, 2013, 41:70-80
[4] Jie T W,Guo G W,Wei Z D,et al. A general approach for error modeling of machine tools[J].International Journal of Machine Tools and Manufacture,2014, 79:17-23 (in Chinese)
[5] Campolo D. Motor selection via impedance-matching for driving nonlinearly damped, resonant loads[J]. Mechatronics,2010, 20(5):566-573
[6] Hoshi E,Shima K,Tanji J. Neuronal activity in the primate prefrontal cortex in the process of motor selection based on two behavioral rules[J]. Journal of Neurophysiology,2000,83(4): 2355-2373
[7] Jun Z H,Hua L Q,Qing Z. Shuo,Theory and method of mechanism system design [J].Frontiers of Mechanical Engineering in China,2010, 5(4):399-411 (in Chinese)
[8] Svekrov V M. Increasing the wear resistance of abrasive wheels[J]. Metallurgist,1971, 15(5):323-324
[9] Irie S, Greg K,Ren Z,et al. Dynamic property of aluminum foam[J]. The International Journal of Multi-physics, 2010, 4(2):103-111 |
|
|
|
|
|
|
|
