Articles:-
Citation:
XU Liang-xiong, ZHOU Xiang. The Electrical and Mechanical Alignment and Accuracy Detection of Numerial Control Machine Tool[J]. International Journal of Plant Engineering and Management, , (): -

The Electrical and Mechanical Alignment and Accuracy Detection of Numerial Control Machine Tool
XU Liang-xiong, ZHOU Xiang
Department of Electromechanical Engineering Wuhan Technical College of Communications,Wuhan 430065,P. R. China
Abstract:
In the work of numerical control reformation of general machine tool,the installation and debugging of machine tool is a crucial part. For the C6132 machine tool,and make the use of electrical and mechanical alignment,parameter adjusting,numerical control lathe accuracy debugging and performance examination has been used to finish a series of tailing in the work of numerical control reformation of general machine tool. In this paper, the detailed process of electrical and mechanical alignment,parameter adjusting,numerical control lathe accuracy debugging and performance examination has been demonstrated,meanwhile,the specific operational approach of these work programs has been discussed. Therefore,the present results provides essential reference and approach for the numerical control reformation of general machine tool.
Key words:    electrical and mechanical alignment    parameter adjusting    numerical control lathe accuracy debugging and performance examination   
Received: 2011-12-07     Revised:
DOI:
Corresponding author:     Email:
Author description:
Service
PDF(KB) Free
Print
Authors

References:
[1] Wang G Q,Research and development of auto-matic programming system for CNC flame cut-tang. Tianjin:Tianjin University,1-63,2009 (In Chinese)
[2] Guan X Y,Research on aualysis method ofdyuamic characteristics for spindle system ofNC machine tool. Modular Machine Tool andAutomatic Manufacturing Technique,(4):1-6,2010(In Chinese)
[3] ZhenSZ,C650 type Lathe to improve the elec-trical control circuit design.Machine ToolElectric Apparatus,(3):57,2004(In Chinese)
[4] Song J W,Yang L,Discussion of fault diag-uosis and exclusion of NC machine tool returnreference point. Modular Machine Tool andAutomatic Manufacturing Technique,(10):60-63,2008 (In Chinese)
[5] Zhao X J,Development of the CNC system forthe Mc FP 4TC. Tianjin:Tianjin University,1-58,2010 (In Chinese)
[6] Deng C Q,The reformation and electric con-trol design for X712 type numerical controlmill machine. Modular Machine Tool and Au-tomatic Manufacturing Technique,(10):90-91,2006
[7] Zhang H,GuoRF,Geng C,et al,Study onsoftware architecture of ONC system based onMulti-ageut system. Modular Machine Tooland Automatic Manufacturing Technique,(6):52-562011
[8] Shi L P,The CNC mauufacturiug of planardouble-enveloping worm pair based on Lathereshaping. Modular Machine Tool and Auto-matic Manufacturing Technique,(7):78-802010 (In Chinese)
[9] Li J Z,The compeusataou and auailsis of pitcherror for NC machining tools. Modular Ma-chine Tool and Automatic ManufacturingTechnique,(2):98-101,2010(In Chinese)
[10] Wang Z,Zhao A G,Zhao D Y,et al,Com-preheusave auailsis of the posataouaug precasaouof CNC. Machinery Design and Manufacture,(9):132-13 3 2010 (In Chinese)
[11] Liu S H,Ye W H,Tang D B,et al,Fuzz comprehensive evaluation for the performance of a numerical control machine tool based on the aualytic hierarchy process. Journal of Shan-dung University(Engineering Science),40 (1):68-72,2010 (In Chinese)
[12] Gao Q W,Measures of improving the accuracy of CNC machine tools. Journal of Anyang In-stitute of Technology,9(2):13-14,2010 (In Chinese)
[13] Zhu S X,lpplicatiou research of CNC preci-siou detection and improvement. Manufactur-ing Technology and Machine Tool (7):133-136,2010 (In Chinese)
[14] Li J Z,Au effective approach for NC machi-uiug tools accuracy test. Modular Machine Tool and Automatic Manufacturing Tech-nique,(5):60-622010 (In Chinese)
[15] Zhang Y Q,Real-time video monitoring system for CNC machining process of DNC based on ARM9. Modular Machine Tool and Automatic Manufacturing Technique,(7):40-42,2010 (In Chinese)
Similar articles:
1.XU Liang-xiong, ZHOU Xiang.The Electrical and Mechanical Alignment and Accuracy Detection of Numerial Control Machine Tool[J]. International Journal of Plant Engineering and Management, 2012,17(1): 44-49