|
|
Articles:- |
|
|
Citation: |
|
|
WANG Nan, LI Shi-qi, WANG Jun-feng, ZHANG Zhen-li. Research of Dynamic Material Handling in an Automobile General Assembly Line Based on Real-time Information[J]. International Journal of Plant Engineering and Management, , (): - |
|
|
|
|
|
|
|
| Research of Dynamic Material Handling in an Automobile General Assembly Line Based on Real-time Information |
|
| WANG Nan, LI Shi-qi, WANG Jun-feng, ZHANG Zhen-li |
|
| School of Mechanical Science and Engineering, Huazhong University of Science and Technology,Wuhan 430074,P. R. China |
| Abstract: |
| The status of material delivery of an automobile general assembly line is analyzed,and the technique to achieve the real-time tracking of assembly statas information is proposed based on RFID(Radio Frequency Identification). Thus the consumption of line-side buffer is obtained dynamically,then the type and quantity of needed material are fed back to the subsystem of material handling; the algorithm for determining the best time departure time of delivery driver based on minimizing of total time penalty function is proposed. This approach makes the ma-terial amount of a single delivery trip maximized and improves the efficiency of delivery drivers significantly in the case of does not affect the assembly line normal throughput. Additionally,although this dynamic material handling method is developed for the automobile assembly plant,it should be pointed out that this method is also applicable to other mixed model assembly plants such as electronics,semiconductor and aerospace industry. |
| Key words:
automobile general assembly line
material handling
best departure time
|
|
| Received: 2011-12-13
Revised:
|
| DOI: |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Li J,Meerkov S M,Produtiou systems engi-neering. Sprinter,NewYork,2009
[2] Li J,Blumenfeld D E,Huang N,Alden J M,Thronghput aualysis of production systems:re-teat advances and future topics. International Journal of Production Research,47(14):3823-3851,2009
[3] Ardavan A V,Gilbert L,Loop based facility planning and material handling. European Journal of Operation Research,164:1-11,2005
[4] Cao Z X,Zhu Y L,Research on material feeding and its implementation in general as-sembly Liue of mixed model automobile. Com-puter Integrated Manufacturing Systems,12 (2):285-2912006 (In Chinese)
[5] Qiu W P,Shi H B,Shang W L,The part-feeding management methodology for mixed-model automotive assembly Line. Machinery Design and Manufacture,1:138-140,2008 (In Chinese)
[6] Zhou G H,Zhang H Z,Zhang Y F,Au RFID-based real-time material delivery meth-od a digital manufacturing workshop. Ap-plied Science and Technology,37 (4):1-5,2010 (In Chinese)
[7] Choi W,Lee Y,A dynamic part feeding sys-tem for au automotive assembly Liue. Computer and Industrial Engineering,43:123-134,2002
[8] Pan C Y,Ni J,Optimization of workforce zou-iug for dolly material handling. IIE AnnualConference and Expo,727-733 2008
[9] Huang G Q,Zhang Y F,Jiang P Y,RFID-based wireless manufacturing for walking-worker assembly islnuds with fixed-positiouLayouts. Robotics and Compute-integratedManufacturing,23 (4),2007
[10] Kwangyoung Im,Kyungsup Kima,TaeeunParkb,Sujeong Leeb,Effeactive vehicle dis-patching method minimizing the blocking anddelivery times in automatic material handlingsystems of 300 mm semiconductor fabrication.International Journal of Production Research,47(14):3997-4011,2009
[11] Monden Y,Toyota production system. NorcrossGA,USA:Institute of Industrial Engineers,(2),1993 |
|
|
|
Similar articles: |
|
|
1．WANG Nan, LI Shi-qi, WANG Jun-feng, ZHANG Zhen-li.Research of Dynamic Material Handling in an Automobile General Assembly Line Based on Real-time Information[J]. International Journal of Plant Engineering and Management, 2012,17(1): 34-43 |
|
|
|
|
|
|
