|
|
Articles:2014,Vol:19,Issue(3):186-192 |
|
|
Citation: |
|
|
WANG Zhi-peng, XIE Xun, LI He, YU Yong-chang. Dynamic Simulation and Optimization Design of the Pendulum Ring Mechanism Based on ADAMS[J]. International Journal of Plant Engineering and Management, 2014, 19(3): 186-192 |
|
|
|
|
|
|
|
| Dynamic Simulation and Optimization Design of the Pendulum Ring Mechanism Based on ADAMS |
|
| WANG Zhi-peng, XIE Xun, LI He, YU Yong-chang |
|
| College of Mechanical and Electrical Engineering,Agricultural University of Henan,Zhengzhou 450002 |
| Abstract: |
| For pendulum ring mechanism,the working principle is analyzed by using the ADAMS software.Confirming the simulation to accord with the actual motion law,the main bars' length is taken as the design variables in order to optimize the cutting speed. The optimization results show that the length of the pendulum rod increases by 3. 22%,the cutting speed increases by 30. 8%. It shows that the length of pendulum rod determines the cutting speed at a given pendulum angle. Designers can adjust the length of pendulum rod so as to select the appropriate cutting speed. The virtual prototype technology could the performance of the product is not only improved,and the design efficiency is also done. |
| Key words:
pendulum ring mechanism
dynamic simulation
optimization
ADAMS
|
|
| Received: 2014-08-25
Revised:
|
| DOI: 10.13434/j.cnki.1007-4546.2014.0306 |
| Corresponding author:
Email： |
| Author description:
|
|
|
|
|
|
|
|
References: |
|
|
[1] Li J P. Modeling and movement simulation of pendulum ring mechanism [J]. Journal of Agricultural Mechanization Research,2008,(6):31-33 (in Chinese)
[2] Wu X M. Kinematics analysis of pendulum ring mechanism in harvesting machines[J].Journal of Agricultural Mechanization Research, 2010, (6):58-64 (in Chinese)
[3] Wang W J. Agricultural machinery design manual [M]. Beijing: Mechanical Industry Press, 2010:920-921 (in Chinese)
[4] Li J. The simulation of united harvest machine cutting mechanism based on virtual prototype technology [J]. Journal of Agricultural Machinery, 2006, (10):74-76 (in Chinese)
[5] Zhao W Y. Foundation and application example of ADAMS[M]. Beijing:Tsinghai University Press, 2011 (in Chinese)
[6] Guo W D. Virtual prototype technology and ADAMS application instance tutorial[M].Beijing:Beijing University of Aeronautics and Astronautics Press, 2012 (in Chinese) |
|
|
|
|
|
|
|
