Citation: | CAI Ling. Study on Influences of Manufacturing Process on Detail Fatigue Rating of Aluminum-lithium Alloy Structure[J]. Mechanical Science and Technology for Aerospace Engineering, 2024, 43(3): 533-539. doi: 10.13433/j.cnki.1003-8728.20220276 |
[1] |
李飘, 姚卫星. 铝锂合金材料发展及综合性能评述[J]. 航空工程进展, 2019, 10(1): 12-20.
LI P, YAO W X. Review on the development and performance of aluminum-lithium alloys[J]. Advances in Aeronautical Science and Engineering, 2019, 10(1): 12-20. (in Chinese)
|
[2] |
李红萍, 叶凌英, 邓运来, 等. 航空铝锂合金研究进展[J]. 中国材料进展, 2016, 35(11): 856-862.
LI H P, YE L Y, DENG Y L, et al. Progress of aerocraft al-li alloys[J]. Materials China, 2016, 35(11): 856-862. (in Chinese)
|
[3] |
郝敏, 王亮, 陈军洲, 等. 2060-T8E30铝锂合金平面各向异性和断裂破坏机制研究[J]. 稀有金属, 2021, 45(6): 641-649.
HAO M, WANG L, CHEN J Z, et al. In-plane anisotropy and tensile failure mechanism of 2060-T8E30 Al-Li alloy sheet[J]. Chinese Journal of Rare Metals, 2021, 45(6): 641-649. (in Chinese)
|
[4] |
陈铮. 铝锂合金的发展趋势、关键技术及应用[J]. 材料导报, 1999, 13(2): 1-3.
CHEN Z. Developmental tendency, key technologies and applications of aluminum-lithium alloys[J]. Materials Review, 1999, 13(2): 1-3. (in Chinese)
|
[5] |
陈铮. 铝锂合金疲劳行为及机理[J]. 航空学报, 1991, 12(11): A629-A634.
CHEN Z. Behavior and mechanisms of fatigue for Al-Li alloys[J]. Acta Aeronautica et Astronautica Sinica, 1991, 12(11): A629-A634. (in Chinese)
|
[6] |
赵要武, 孙秦, 杨庆雄. 铝锂合金疲劳裂纹的微观实验观察[J]. 西北工业大学学报, 1998, 16(4): 616-621.
ZHAO Y W, SUN Q, YANG Q X. On micro crack and short crack in Al-Li alloy fatigue[J]. Journal of Northwestern Polytechnical University, 1998, 16(4): 616-621. (in Chinese)
|
[7] |
张兴振, 李小强, 李东升, 等. 新型铝锂合金2060T8板材铣削试验研究[J]. 航空制造技术, 2015(3): 47-51. doi: 10.16080/j.issn1671-833x.2015.03.046
ZHANG X Z, LI X Q, LI D S, et al. Experimental study on milling of new Al-Li alloy 2060T8 sheet[J]. Aeronautical Manufacturing Technology, 2015(3): 47-51. (in Chinese) doi: 10.16080/j.issn1671-833x.2015.03.046
|
[8] |
马世玲, 董长双. 微铣削高温合金GH4169表面残余应力分析与预测优化[J]. 工具技术, 2018, 52(4): 79-82.
MA S L, DONG C S. Analysis prediction and optimization of surface residual stress in micro-milling superalloy GH4169[J]. Tool Engineering, 2018, 52(4): 79-82. (in Chinese)
|
[9] |
田冬凤, 韦红余, 陈文亮, 等. 铆接结构抗疲劳性的工艺影响分析[J]. 机械科学与技术, 2013, 32(9): 1332-1336.
TIAN D F, WEI H Y, CHEN W L, et al. Effect of riveting process on fatigue resistance for riveted structure[J]. Mechanical Science and Technology for Aerospace Engineering, 2013, 32(9): 1332-1336. (in Chinese)
|
[10] |
苏国胜, 刘战强, 万熠, 等. 高速切削中切削速度对工件材料力学性能和切屑形态的影响机理[J]. 中国科学:技术科学, 2012, 42(11): 1305-1317. doi: 10.1360/092011-533
SU G S, LIU Z Q, WAN Y, et al. The mechanism of the influence of cutting speed on the mechanical properties of the workpiece material and the chip morphology in high-speed cutting[J]. Scientia Sinica (Technologica), 2012, 42(11): 1305-1317. (in Chinese) doi: 10.1360/092011-533
|
[11] |
刘战强, 万熠, 艾兴. 高速铣削过程中表面粗糙度变化规律的试验研究[J]. 现代制造工程, 2002(3): 8-10. doi: 10.3969/j.issn.1671-3133.2002.03.002
LIU Z Q, WAN Y, AI X. Experimental investigation of surface roughness in high-speed milling[J]. Modern Manufacturing Engineering, 2002(3): 8-10. (in Chinese) doi: 10.3969/j.issn.1671-3133.2002.03.002
|
[12] |
American Society for Testing Materials. Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials:ASTM E466-07[S]. American:American Society for Testing Materials,2015.
|
[13] |
郑晓玲. 民机结构耐久性与损伤容限设计手册(上册)[M]. 北京: 航空工业出版社, 2003: 330-335.
ZHENG X L. Civil aircraft structural durability and damage tolerance design manual (Volume 1)[M]. Beijing: Aviation Industry Press, 2003: 330-335. (in Chinese)
|
[14] |
中华人民共和国航空工业标准. 《金属材料细节疲劳额定强度截止值(DFRcutoff)试验方法》:HB7110-94[S].北京:中国航空工业总公司,1995.
Aviation Industry Standards of the People's Republic of China. 《Metal material detail fatigue rated strength cut-off (DFRcutoff) test method》:HB7110-94[S]. Beijing: China Aviation Industry General Company,1995. (in Chinese)
|
[15] |
杨悦, 余路, 蒋红宇, 等. 铆接干涉量对疲劳寿命的影响分析[J]. 机械制造与自动化, 2021, 50(2): 87-90. doi: 10.19344/j.cnki.issn1671-5276.2021.02.023
YANG Y, YU L, JIANG H Y, et al. The effects of interference-fit level on fatigue[J]. Machine Building & Automation, 2021, 50(2): 87-90. (in Chinese) doi: 10.19344/j.cnki.issn1671-5276.2021.02.023
|