Citation: | Feng Sen, Lu Wenzhuang, Zuo Yangping, Liu Sen, Yan Pengqing, Pan Hanfei. Flow Fields Simulation of Plasma Carbonitriding in Liquid for Titanium Alloy[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(9): 1450-1454. doi: 10.13433/j.cnki.1003-8728.2016.0925 |
[1] |
李杰,沈德久,王玉林,等.液相等离子体电解渗透技术[J].金属热处理,2005,30(9):63-67 Li J, Shen D J, Wang Y L, et al. Plasma electrolytic saturation technique in solution[J]. Heat Treatment of Metals, 2005,30(9):63-67 (in Chinese)
|
[2] |
聂学渊.快速表面改性技术研究[J].金属热处理,1997,(3):19-22,28 Nie X Y. Study of the rapid surface modification technology[J]. Heat Treatment of Metals, 1997,(3):19-22,28 (in Chinese)
|
[3] |
Yerokhin A L, Nie X, Leyland A, et al. Plasma electrolysis for surface engineering[J]. Surface and Coatings Technology, 1999,122(2-3):73-93
|
[4] |
Nie X, Tsotsos C, Wilson A, et al. Characteristics of a plasma electrolytic nitrocarburising treatment for stainless steels[J]. Surface and Coatings Technology, 2001,139(2-3):135-142
|
[5] |
柳永康,谢发勤,胡宗纯,等.时间和电压对TC4合金表面等离子碳氮共渗层的影响[J].中国表面工程,2007,20(5):37-40 Liu Y K, Xie F Q, Hu Z C, et al. The effect of time and voltage on plasma carbonitriding layer of TC4 alloy[J]. China Surface Engineering, 2007,20(5):37-40 (in Chinese)
|
[6] |
Teixeira V. Mechanical integrity in PVD coatings due to the presence of residual stresses[J]. Thin Solid Films, 2001,392(2):276-281
|
[7] |
Škoriĉ B, Kakaš D, Bibic N, et al. Microstructural studies of TiN coatings prepared by PVD and IBAD[J]. Surface Science, 2004,566-568:40-44
|
[8] |
Matsuura K, Kudoh M. Surface modification of titanium by a diffusional carbo-nitriding method[J]. Acta Materialia, 2002,50(10):2693-2700
|
[9] |
李新梅,孙文磊,憨勇,等. 纯钛表面电解液微弧碳氮化制备碳氮化钛厚膜[J].金属学报,2008,44(9):1105-1110 Li X M, Sun W L, Han Y, et al. Preparation of Ti(CxN1-x) thick films on titanium by plasma electrolytic carbonitriding[J]. Acta Metallurgica Sinica, 2008,44(9):1105-1110 (in Chinese)
|
[10] |
Ando K, Matsumura K. Current efficiency in the plasma anodization of aluminium[J]. Thin Solid Films, 1978,52(2):153-162
|
[11] |
Tarakci M, Korkmaz K, Gencer Y, et al. Plasma electrolytic surface carburizing and hardening of pure iron[J]. Surface and Coatings Technology, 2005,199(2-3):205-212
|
[12] |
张凯,王瑞金,王刚.Fluent技术基础与应用实例[M].2版.北京:清华大学出版社,2010 Zhang K, Wang R J, Wang G. Technology base and application examples of Fluent[M]. 2nd ed. Beijing: Tsinghua University Press, 2010 (in Chinese)
|
[13] |
武立胜,吕新生,张晔,等.基于Fluent 连杆模具电解加工过程的三维流场分析[J].机械科学与技术,2011,30(9):1443-1445 Wu L S, L? X S, Zhang Y, et al. Fluent based numerical simulation of three-dimensional flow field of electrochemical machining for a connecting rod mold[J]. Mechanical Science and Technology for Aerospace Engineering, 2011,30(9):1443-1445 (in Chinese)
|
[14] |
傅秀清,康敏,鲜洁宇,等.电解车削加工流场的数值模拟及工艺试验研究[J].机械科学与技术,2014,33(5):693-696 Fu X Q, Kang M, Xian J Y, et al. Research on the numerical simulation and experiments of the flow field in electrochemical turning[J]. Mechanical Science and Technology for Aerospace Engineering, 2014,33(5):693-696 (in Chinese)
|
[15] |
崔庆忠,邵文英,王风云.不同温度下水-甲酰胺体系的密度与粘度[J].华东工学院学报,1992(5):88-91,96 Cui Q Z, Shao W Y, Wang F Y. Densities and viscosities of H2O-HCONH2 mixtures at different temperatures[J]. Journal of East China Institute of Technology, 1992(5):88-91,96 (in Chinese)
|