|
|
论文:2023,Vol:41,Issue(2):354-362 |
|
|
引用本文： |
|
|
马晓敏, 李清安, 张永辉, 范玮. 超声速进气道与脉冲爆震燃烧室匹配工作特性研究[J]. 西北工业大学学报 |
|
|
MA Xiaomin, LI Qing'an, ZHANG Yonghui, FAN Wei. Study on coupling characteristics of supersonic inlet and pulse detonation combustor[J]. Journal of Northwestern Polytechnical University |
|
|
|
|
|
|
|
| 超声速进气道与脉冲爆震燃烧室匹配工作特性研究 |
|
| 马晓敏, 李清安, 张永辉, 范玮 |
|
| 西北工业大学 动力与能源学院, 陕西 西安 710072 |
| 摘要: |
| 为探索设计点马赫数为2.5的三波系二元混压式超声速进气道与脉冲爆震燃烧室的匹配工作特性,设计了3种工作方案,采用带有化学反应的非定常数值仿真方法,研究了多循环工作过程。结果表明:燃烧室出口泄压与燃烧室进口机械阀均能抑制反传压缩波向上游的传播,拓宽进气道稳定工作裕度,且能提高循环频率;但前者会损失推力,而后者能大幅增加推力。机械阀会对燃气中的压缩波产生反射作用,增大燃烧室内湍流度,使得在开阀瞬间燃气被卷吸至上游扩张段内,但燃气中的反射压缩波不会影响爆震波波速与形态。在爆震波起爆与传播过程中,燃烧室进口应尽可能扩大物理遮挡物阻塞比,且不应对进气道出口流动造成堵塞,增加流动阻力。 |
| 关键词:
脉冲爆震
超声速进气道
压力反传
|
|
| Study on coupling characteristics of supersonic inlet and pulse detonation combustor |
|
| MA Xiaomin, LI Qing'an, ZHANG Yonghui, FAN Wei |
|
| School of Power and Energy, Northwestern Polytechnical University, Xi'an 710072, China |
| Abstract: |
| Coupling model for two-dimensional mixed-compression supersonic inlet with Mach number of 2.5 at design point and pulse detonation combustor was established, and three working schemes were designed to investigate multi cycle working process by using unsteady numerical simulation with chemical reaction. The results show that the following two measurements can both restrain the back-propagating compression wave and broaden the stability margin of the inlet and increase the frequency, one of which is the pressure relief at the outlet of the combustor, the other is valve at the inlet of the combustor. Nevertheless, the former will lose thrust, while the latter can greatly increase thrust. Meanwhile, the valve will reflect the compression wave in the production; increase the turbulence in the combustor, and make the gas entrained into the diffuser section of the inlet at the moment of opening the valve. However, the reflected compression wave in the hot production will not affect the velocity and shape of the detonation wave. Furthermore, in the period of detonation wave initiation and propagation, the blockage ratio of physical obstructions at the inlet of the combustor should be expanded as much as possible. At the same time, the flow at the outlet of the inlet should not be blocked to increase the flow resistance. |
| Key words:
pulse detonation
supersonic inlet
back-propagating pressure
|
|
| 收稿日期: 2022-06-10
修回日期:
|
| DOI: 10.1051/jnwpu/20234120354 |
| 通讯作者: 范玮(1966-),西北工业大学教授,主要从事燃烧学及脉冲爆震发动机应用基础研究。e-mail:weifan419@nwpu.edu.cn
Email：weifan419@nwpu.edu.cn |
| 作者简介: 马晓敏(1996-),西北工业大学博士研究生,主要从事脉冲爆震发动机进气系统研究。
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 严传俊, 范玮. 脉冲爆震发动机原理及关键技术[M]. 西安:西北工业大学出版社, 2005 YAN Chuanjun, FAN Wei. Pulse detonation engine principle and key issues of technology[M]. Xi'an:Northwestern Polytechnical University Press, 2005 (in Chinese)
[2] BUSSING T, PAPPAS G. An introduction to pulse detonation engines[C]//Aerospace Sciences Meeting & Exhibit, 1994
[3] HINCKLEY K, CHAPIN D, TANGIRALA V, et al. An experimental and computational study of pulse detonation engines[C]//AIAA Aerospace Sciences Meeting & Exhibit, 2004
[4] OH J Y, MA F, HSIEH S Y, et al. Interactions between shock and acoustic waves in a supersonic inlet diffuser[J]. Journal of Propulsion & Power, 2015, 21(3):486-495
[5] MULLAGIRI S, SEGAL C. Oscillating flows in inlets of pulse detonation engines[C]//39th Aerospace Sciences Meeting & Exhibit, 2001
[6] MULLAGIRI S, HUBNER P J, SEGAL C. Oscillating flows in a model pulse detonation engine inlet[J]. AIAA Journal, 1971, 41(2):324-326
[7] SEGAL C, NORI V. Oscillating flows in inlets for pulse detonation engines[C]//41st Aerospace Sciences Meeting & Exhibit, 2003
[8] 关祥东, 孟宇鹏, 朱守梅. 脉冲爆震发动机用超声速进气道非定常流场初步研究[C]//全国激波与激波管学术会议, 2010 GUAN Xiangdong, MENG Yupeng, ZHU Shoumei. Preliminary study on unsteady flow field of supersonic inlet for pulse detonation engine[C]//National Conference on Shock Wave and Shock Tube, 2010 (in Chinese)
[9] 王丁喜, 严传俊. 脉冲爆震发动机进气道气动性能的数值研究[J]. 力学学报, 2005, 37(6):777-782 WANG Dingxi, YAN Chuanjun. Numerical study of the dynamics performance of an inlet for pulse detonation engines[J]. Chinese Journal of Theoretical and Applied Mechanics, 2005, 37(6):777-782 (in Chinese)
[10] WANG Z, WANG Y, PENG C, et al. Experimental study of pressure back-propagation in a valveless air-breathing pulse detonation engine[J]. Applied Thermal Engineering, 2017, 110:62-69
[11] CHEN W, FAN W, LUO F, et al. Effect of inlet-valve structures on thrust of airbreathing pulse detonation engines[J]. Propulsion and Power Research, 2021, 10(4):332-346
[12] 温玉芬, 谭慧俊, 张启帆,等. 爆震发动机超声速进气道的非定常耦合流场数值研究[J]. 航空动力学报, 2012, 27(11):2511-2520 WEN Yufen, TAN Huijun, ZHANG Qifan, et al. Numerical investigation on unsteady flow structure in supersonic inlet coupled with pulse detonation engine combustor[J]. Journal of Aerospace Power, 2012, 27(11):2511-2520 (in Chinese)
[13] ZANGIEV A E, IVANOV V S, FROLOV S M. Thrust characteristics of an airbreathing pulse detonation engine in flight at Mach numbers of 0.4 to 5.0[J]. Russian Journal of Physical Chemistry B, 2016, 10(2):272-283
[14] QIU H, XIONG C, LIA J. A theoretical and 1-D numerical investigation on a valve/valveless air-breathing pulse detonation engine[J]. Chinese Journal of Aeronautics, 2021, 34(1):68-78
[15] 谢旅荣, 郭荣伟.一种定几何混压式二元进气道的再起动特性研究[J]. 航空动力学报, 2008, 23(2):389-395 XIE Lürong, GUO Rongwei. Investigation of the restart performance of a mixed-compression two-dimensional supersonic inlet with fixed-geometry[J]. Journal of Aerospace Power, 2008, 23(2):389-395 (in Chinese)
[16] 李清安. 脉冲爆震冲压发动机性能分析与燃烧室反流抑制技术研究[D]. 西安:西北工业大学, 2022 LI Qing'an. Investigation on performance anlysis of pulse detonation ramjets and combustor back-flow suppression technology[D]. Xi'an:Northwestern Polytechnical University, 2022 (in Chinese) |
|
|
|
|
|
|
|
