|
|
论文:2023,Vol:41,Issue(1):47-55 |
|
|
引用本文： |
|
|
肖维忠, 袁莹涛, 葛振东, 郭翔, 索涛, 于起峰. 基于结构光点云的变形测量方法研究[J]. 西北工业大学学报 |
|
|
XIAO Weizhong, YUAN Yingtao, GE Zhendong, GUO Xiang, SUO Tao, YU Qifeng. Study on deformation measurement method based on structured light point clouds[J]. Journal of Northwestern Polytechnical University |
|
|
|
|
|
|
|
| 基于结构光点云的变形测量方法研究 |
|
| 肖维忠1,2, 袁莹涛1, 葛振东1, 郭翔1, 索涛1, 于起峰1,3 |
|
1. 西北工业大学 航空学院, 陕西 西安 710072;
2. 中国航天空气动力技术研究院, 北京 100074;
3. 深圳大学 物理与光电工程学院, 广东 深圳 518060 |
| 摘要: |
| 针对结构变形测量需求,提出一种基于结构光点云的变形测量方法。搭建了结构光相机测量系统,基于投影仪逆向相机的假设并借助棋盘格标定板完成了系统标定。采用格雷码辅助的四步相移技术设计投影仪投射的图案,并利用标定的系统参数,完成待测物表面的三维重建,获得结构表面点云。提出基于点云间距离计算结果的结构变形分析方法,并分析比较了基于点到点、点到面和面到面3种点云距离计算方法原理。通过实验验证了所提基于结构光点云的变形测量方法的可行性和精度,实验结果表明,该方法可以实现结构离面位移的高精度测量。 |
| 关键词:
结构光
格雷码
相移
点云
变形测量
|
|
| Study on deformation measurement method based on structured light point clouds |
|
| XIAO Weizhong1,2, YUAN Yingtao1, GE Zhendong1, GUO Xiang1, SUO Tao1, YU Qifeng1,3 |
|
1. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China;
2. China Academy of Aerospace Aerodynamics, Beijing 100074, China;
3. College of Physics and Optoelectronic Engineering, Shenzhen University, Shenzhen 518060, China |
| Abstract: |
| For the requirement of structural deformation measurement, a deformation measurement method based on structured light point clouds is proposed. A structured light measurement system is built, and the calibration process based on the assumption of the projector's reverse camera and with the help of the checkerboard calibration board is completed. The pattern projected by the projector is designed by using a four-step phase-shift technique assisted by Gray code. By combining with system parameters which have been calibrated, the three-dimensional reconstruction of the object surface is completed. A structural deformation measurement method based on the statistical analysis of the distance between point clouds is proposed, and the principles of three points cloud distance calculation methods including point-to-point, point-to-surface and surface-to-surface are analyzed. The feasibility and accuracy of the deformation measurement method based on the structured light point cloud proposed in this paper are verified via experiments. Experimental results show that this method can achieve out-plane high-precision displacement measurement of structures. |
| Key words:
structured light
gray code
phase shift
point cloud
deformation measurement
|
|
| 收稿日期: 2022-05-13
修回日期:
|
| DOI: 10.1051/jnwpu/20234110047 |
| 基金项目: 国家自然科学基金(12072279,11602201)资助 |
| 通讯作者: 袁莹涛(1994-),西北工业大学博士研究生,主要从事光测实验力学研究。e-mail:yuanyingtao@mail.nwpu.edu.cn
Email：yuanyingtao@mail.nwpu.edu.cn |
| 作者简介: 肖维忠(1979-),西北工业大学博士研究生,主要从事光测实验力学研究。
|
|
| 相关功能 |
|
|
|
|
| 作者相关文章 |
|
| 肖维忠 在本刊中的所有文章 |
| 袁莹涛 在本刊中的所有文章 |
| 葛振东 在本刊中的所有文章 |
| 郭翔 在本刊中的所有文章 |
| 索涛 在本刊中的所有文章 |
| 于起峰 在本刊中的所有文章 |
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 伍小平. 近40年光力学进展的回顾[J]. 实验力学, 2010, 25(5):491-508 WU Xiaoping. A brief review of photomechanics progress in recent 40 years[J]. Journal of Experimental Mechanics, 2010, 25(5):491-508 (in Chinese)
[2] 尚洋, 于起峰, 关棒磊, 等. 大型结构变形监测摄像测量研究进展[J]. 实验力学, 2017, 32(5):593-600 SHANG Yang, YU Qifeng, GUAN Banglei, et al. Recent advances of videometrics for large-scale structure deformation monitoring[J]. Journal of Experimental Mechanics, 2017, 32(5):593-600 (in Chinese)
[3] 王永红, 包凤卿, 张肖, 等. 数字散斑干涉三维变形测量技术研究进展[J]. 应用光学, 2020, 41(4):681-689 WANG Yonghong, BAO Fengqing, ZHANG Xiao, et al. Three-dimensional deformation measurement based on digital speckle pattern interferometry[J]. Journal of Applied Optics, 2020, 41(4):681-689 (in Chinese)
[4] PAN B, QIAN K, XIE H, et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement:a review[J]. Measurement Science & Technology, 2009, 20(6):062001
[5] 邵新星, 陈振宁, 戴云彤, 等. 数字图像相关方法若干关键问题研究进展[J]. 实验力学, 2017, 32(3):305-325 SHAO Xinxing, CHEN Zhenning, DAI Yuntong, et al. Research progress of several key problems in digital image correlation method[J]. Journal of Experimental Mechanics, 2017, 32(3):305-325 (in Chinese)
[6] YANG J, HUANG J, JIANG Z, et al. SIFT-aided path-independent digital image correlation accelerated by parallel computing[J]. Optics and Lasers in Engineering, 2020, 127:105964
[7] WANG X, LIU X, ZHU H, et al. Spatial-temporal subset based digital image correlation considering the temporal continuity of deformation[J]. Optics and Lasers in Engineering, 2017, 90(5):247-253
[8] SU Y, ZHANG Q. Glare:a free and open-source software for generation and assessment of digital speckle pattern[J]. Optics and Lasers in Engineering, 2022, 148:106766
[9] 潘兵, 谢惠民. 数字图像相关中基于位移场局部最小二乘拟合的全场应变测量[J]. 光学学报, 2007, 27(11):1980-1986 PAN Bing. XIE Huimin. Full-field strain measurement based on least-square fitting of local displacement for digital image correlation method[J]. Acta Optical Sinica, 2007, 27(11):1980-1986 (in Chinese)
[10] 丁少闻, 张小虎, 于起峰, 等. 非接触式三维重建测量方法综述简[J]. 激光与光电子学进展, 2017, 54:070003 DING Shaowen, ZHANG Xiaohu, YU Qifeng, et al. overview of non-contact 3D reconstruction measurement methods[J]. Lasers & Optoeletronics Progress, 2017, 54:070003
[11] 张宗华, 刘巍, 刘国栋, 等. 三维视觉测量技术及应用进展[J]. 中国图象图形学报, 2021,26(6):1483-1502 ZHANG Zonghua, LIU Wei, LIU Guodong, et al. Overview of the development and application of 3D vision measurement technology[J]. Journal of Image and Graphics, 2021, 26(6):1483-1502 (in Chinese)
[12] LI B, KARPINSKY N, SONG Z. Novel calibration method for structured-light system with an out-of-focus projector[J]. Applied Optics, 2014, 53(16):3415-3426
[13] 梁晋, 肖振中, 臧顺来, 等. 外差式多频相移技术的三维光学点云测量研究[J]. 锻压技术, 2008, 33(1):143-147 LIANG Jin, XIAO Zhenzhong, ZANG Shunlai, et al. Study on 3D optical points dense cloud measuring system based on heterodyne multiple frequency phase shift technology[J]. Forging & Stamping Technology, 2008, 33(1):143-147(in Chinese)
[14] WU Z, GUO W, ZHANG Q. High-speed three-dimensional shape measurement based on shifting gray-code light[J]. Optics Express, 2019, 27(16):22631-22644
[15] YANG H, XU X. Structure monitoring and deformation analysis of tunnel structure[J]. Composite Structures, 2021, 276:114565
[16] ZHAO Y, ZHU Z, LIU W, et al. Application of 3D laser scanning on NATM tunnel deformation measurement during construction[J]. Acta Geotechnica, 2023,18(1):483-494
[17] YANG H, OMIDALIZARANDI M, XU X, et al. Terrestrial laser scanning technology for deformation monitoring and surface modeling of arch structures[J]. Composite Structures, 2017, 169:173-179
[18] ZHANG S, HUANG P S. Novel method for structured light system calibration[J]. Optical Engineering, 2006, 45(8):083601
[19] ZHANG Z. A flexible new technique for camera calibration[J]. IEEE Trans on Pattern Analysis and Machine Intelligence, 2000, 22(11):1330-1334
[20] SANSONI G, CAROCCI M, RODELLA R. Three-dimensional vision based on a combination of gray-code and phase-shift light projection:analysis and compensation of the systematic errors[J]. Applied Optics, 1999, 38(31):6565-6573
[21] GIRARDEAU-MONTAUT D, ROUX M, MARC R, et al. Change detection on points cloud data acquired with a ground laser scanner[J]. International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, 2005, 36(3):W19
[22] CHA G, PARK S, OH T. A terrestrial lidar-based detection of shape deformation for maintenance of bridge structures[J]. Journal of Construction Engineering and Management, 2019, 145(12):04019075
[23] LEE D T, SCHACHTER B J. Two algorithms for constructing a Delaunay triangulation[J]. International Journal of Computer & Information Sciences, 1980, 9(3):219-242
[24] LAGUE D, BRODU N, LEROUX J. Accurate 3D comparison of complex topography with terrestrial laser scanner:application to the Rangitikei canyon(N-Z)[J]. ISPRS Journal of Photogrammetry and Remote Sensing, 2013, 82:10-26 |
|
|
|
|
|
|
|
