|
|
论文:2021,Vol:39,Issue(6):1395-1403 |
|
|
引用本文： |
|
|
杨静宁, 唐健, 卢镜宇, 李清禄. 功能梯度形状记忆合金梁的相变力学行为[J]. 西北工业大学学报 |
|
|
YANG Jingning, TANG Jian, LU Jingyu, LI Qinglu. Phase transformation mechanical behavior of functionally graded shape memory alloy beams[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 功能梯度形状记忆合金梁的相变力学行为 |
|
| 杨静宁, 唐健, 卢镜宇, 李清禄 |
|
| 兰州理工大学 理学院, 甘肃 兰州 730050 |
| 摘要: |
| 基于梁的弯曲变形理论，结合形状记忆合金材料的应力-应变关系和临界应力-温度关系，得到了功能梯度形状记忆合金超静定梁的非线性控制方程，研究了梁在热-机械载荷作用下的力学行为。采用分阶段分步骤的方法分析了梁的相变过程，得到了机械载荷、拉压不对称系数、幂指数和温度对中性轴位移、曲率和相边界的影响。结果表明：载荷越大，中性轴位移和曲率越大，相边界越远离截面边缘；温度和幂指数越大，中性轴位移和曲率越小，相边界越靠近截面边缘；拉压不对称系数对受压侧相边界影响较大，而对受拉侧相边界影响较小。 |
| 关键词:
功能梯度形状记忆合金
超静定
相变
拉压不对称系数
|
|
| Phase transformation mechanical behavior of functionally graded shape memory alloy beams |
|
| YANG Jingning, TANG Jian, LU Jingyu, LI Qinglu |
|
| School of Science, Lanzhou University of Technology, Lanzhou 730050, China |
| Abstract: |
| Based on the bending deformation theory of the beam, combined with stress-strain relationship and the critical stress-temperature relationship of the shape memory alloy materials, the nonlinear governing equation of the functionally graded shape memory alloy statically indeterminate beam was obtained, and its mechanical behavior under the thermal-mechanical load was investigated. The phase transformation process of the beam was analyzed by a step-by-step method, and the influence of mechanical load, the tension-compression asymmetry coefficient, power exponent and temperature on the displacement of the neutral axis, curvature and phase boundary were obtained. The results draw that as the increase of the load, the displacement of neutral axis and the curvature become larger and the phase boundary is farther away from the edge of the section; the more the temperature and the power exponent are, the smaller the displacement of neutral axis and curvature will be, and the phase boundary become closer to the edge of the section; the tension-compression asymmetry coefficient has a greater influence on the phase boundary of the compressive side, but it has a weak influence on the phase boundary of the tensile side. |
| Key words:
functionally graded shape memory alloy
statically indeterminate
phase transformation
the tension-compression asymmetry coefficient
|
|
| 收稿日期: 2021-03-23
修回日期:
|
| DOI: 10.1051/jnwpu/20213961395 |
| 基金项目: 国家自然科学基金（42161002）资助 |
| 通讯作者:
Email： |
| 作者简介: 杨静宁(1969-),兰州理工大学副教授,主要从事于复合材料结构力学研究。
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 杨静宁, 马连生. 复合材料力学[M]. 北京:国防工业出版社, 2014 YANG Jingning, MA Liansheng. Composite mechanics[M]. Beijing:National Defense Industry Press, 2014(in Chinese)
[2] CISSE C, ZAKI W, ZINEB T B, et al. A review of constitutive models and modeling techniques for shape memory alloys[J]. International Journal of Plasticity, 2016(76):244-284
[3] ZHOU B. A macroscopic constitutive model of shape memory alloy considering plasticity[J]. Mechanics of Materials, 2012, 48(5):71-81
[4] MAHESH K K, FERNANDES F B, GURAU G. Phase transformation in Ni-Ti shape memory and superelastic alloys subjected to high pressure torsion[J]. Advanced Materials Research, 2010(123/124/125):1007-1010
[5] KHALEGHI F, TAJALLY M, EMADODDIN E, et al. Functionally graded shape memory alloy by diffusion annealing of palladium-coated NiTi plates[J]. Metals & Materials International, 2017, 23(5):915-922
[6] BOGDANSKI D, KLLER M, DIETMAR M, et al. Easy assessment of the biocompatibility of Ni-Ti alloys by in vitro cell culture experiments on a functionally graded Ni-NiTi-Ti material[J]. Biomaterials, 2002, 23(23):4549-4555
[7] COLE D, BRUCK H, ROYTBURD A. Fabrication and characterization of graded shape memory alloy thin films[C]//Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2007
[8] COLE D, BRUCK H, ROYTBURD A. Nanomechanical characterisation of graded NiTi films fabricated through diffusion modification[J]. Strain, 2009, 45(3):232-237
[9] VIET N V, ZAKI W, UMER R. Analytical model of functionally graded material/shape memory alloy composite cantilever beam under bending[J]. Composite Structures, 2018, 203(12):764-776
[10] LIU B F, PENG C N, ZHANG W. On behaviors of functionally graded SMAs under thermo mechanical coupling[J]. Acta Mechanica Solida Sinica, 2016, 29(1):46-58
[11] 薛立军, 兑关锁, 刘兵飞. 功能梯度形状记忆合金梁纯弯曲的理论分析[J].机械工程学报, 2012, 48(22):40-45 XUE Lijun, DUI Guansuo, LIU Bingfei. Theoretical analysis of functionally graded shape memory alloy beam subjected topure bending[J]. Journal of Mechanical Engineering, 2012, 48(22):40-45(in Chinese)
[12] 薛立军. 功能梯度形状记忆合金热-力学性能研究[D]. 北京:北京交通大学, 2014 XUE Lijun. Studies on the thermal-mechanical properties of functionally graded shape memory alloy beam[D]. Beijing:Beijing Jiaotong University, 2014(in Chinese)
[13] 康泽天, 周博, 薛世峰. 功能梯度形状记忆合金复合梁的力学行为[J].复合材料学报, 2019, 36(8):1901-1910 KANG Zetian, ZHOU Bo, XUE Shifeng. Mechanical behaviors of functionally graded shape memory alloy composite beam[J]. Acta Materiae Compositae Sinica, 2019, 36(8):1901-1910(in Chinese)
[14] 崔世堂, 姜锡权, 严军. 形状记忆合金梁纯弯曲的理论分析[J].应用力学学报, 2016, 33(1):43-49 CUI Shitang, JIANG Xiquan, YAN Jun. Theoretical analysis of shape memory alloy beam subjected pure bending[J]. Chinese Journal of Applied Mechanics, 2016, 33(1):43-49(in Chinese)
[15] REEDLUNN B, CHURCHILL C B, NELSON E E, et al. Tension compression, and bending of superelastic shape memory alloy tubes[J]. Journal of the Mechanics and Physics of Solids, 2014, 63:506-537
[16] BRINSON L C. One-dimensional constitutive behavior of shape memory alloys:thermo mechanical derivation with non-constant material functions and redefined martensite internal variable[J]. Journal of Intelligent Material Systems and Structure,1993, 4(2):229-242 |
|
|
|
相关文献: |
|
|
1．杨静宁, 王永祥, 马连生.形状记忆合金梁非对称弯曲问题的力学分析[J]. 西北工业大学学报, 2020,38(4): 881-888 |
|
|
|
|
|
|
