论文:2019,Vol:37,Issue(5):1060-1069
引用本文:
闻德生, 刘小雪, 田山恒, 王少朋, 隋广东, 冯佩坤. 多输出内啮合齿轮泵泄漏与容积效率分析及密封改进[J]. 西北工业大学学报
WEN Desheng, LIU Xiaoxue, TIAN Shanheng, WANG Shaopeng, SUI Guangdong, FENG Peikun. Leakage and Volumetric Efficiency Analysis and Seal Improvement of Internal Gear Pump with Multi Output[J]. Northwestern polytechnical university

多输出内啮合齿轮泵泄漏与容积效率分析及密封改进
闻德生, 刘小雪, 田山恒, 王少朋, 隋广东, 冯佩坤
燕山大学 机械工程学院, 河北 秦皇岛 066004
摘要:
基于多输出内啮合齿轮泵结构特性的分析,总结出齿轮泵的主要泄漏途径。通过建立泄漏的数学计算公式,得出3种工作方式下齿轮泵总泄漏量的一般公式,并对泵的容积效率进行了理论计算,得出多输出内啮合齿轮泵采用内泵单独工作时的容积效率最高,外泵单独工作容积效率最低。改进多输出内啮合齿轮泵的结构来减少泄漏,并进行实验验证。实验表明,泵的容积效率总体变化规律与理论分析一致,即随着泵负载压力的升高,容积效率降低。
关键词:    多输出    内啮合齿轮泵    瞬时理论流量    泄漏    容积效率   
Leakage and Volumetric Efficiency Analysis and Seal Improvement of Internal Gear Pump with Multi Output
WEN Desheng, LIU Xiaoxue, TIAN Shanheng, WANG Shaopeng, SUI Guangdong, FENG Peikun
College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China
Abstract:
Based on the analysis of the structural characteristics of the internal meshing gear pump with multi-output, the main leakage ways in the gear pump are summarized. By establishing the mathematical formula of leakage, the general formula of the total leakage of the gear pump under three working modes is obtained, and the volume efficiency of the pump is calculated. It is concluded that the volume efficiency of the internal meshing gear pump with multi output is the highest when the internal pump is used alone, and the volume efficiency of the external pump alone is the lowest. The structure of internal gear pump with multi output is improved to reduce the leakage and is verified via experiments. The experimental results show that the volumetric efficiency of the pump is consistent with the analysis results, that is, the volume efficiency decreases with the increasing of load pressure of pump.
Key words:    multiple output    internal gear pump    instantaneous theoretical flow    leakage    volumetric efficiency   
收稿日期: 2018-10-08     修回日期:
DOI: 10.1051/jnwpu/20193751060
基金项目: 国家自然科学基金(50975246)资助
通讯作者:     Email:
作者简介: 闻德生(1954-),燕山大学教授,主要从事液压传动技术与新型液压元件研究。
相关功能
PDF(2435KB) Free
打印本文
把本文推荐给朋友
作者相关文章
闻德生  在本刊中的所有文章
刘小雪  在本刊中的所有文章
田山恒  在本刊中的所有文章
王少朋  在本刊中的所有文章
隋广东  在本刊中的所有文章
冯佩坤  在本刊中的所有文章

参考文献:
[1] 蒋祖武. 浅析国内外航空用齿轮泵的发展[J]. 装备制造技术, 2014(9):184-185 JIANG Zuwu. Analysis of Development of Gear Pump Applied in Aviation[J]. Equipment Manufacturing Technology, 2014(9):184-185(in Chinese)
[2] 白柳. 液压传动的重要发展方向——纯水液压传动[J]. 液压气动与密封, 2011, 31(6):12-13 BAI Liu. Important Development Direction of Hydraulic——The Pure Water Hydraulic Transmission[J]. Hydraulics Pneumatics & Seals, 2011, 31(6):12-13(in Chinese)
[3] MANRING N D, KASARAGADDA S B. The Theoretical Flow Ripple of an External Gear Pump[J]. Journal of Dynamic Systems Measurement & Control, 2003, 125(3):263-276
[4] 刘志刚, 郭名海, 孔凡忠,等. 基于几何参数的IPH型内啮合齿轮泵流量脉动的研究[J]. 液压与气动, 2012(1):95-97 LIU Zhigang, GUO Minghai, KONG Fanzhong, et al. Study of Flow Pulsation for IPH Internal Gear Pump Based on Geometric Parameters[J]. Chinese Hydraulics & Pneumatics, 2012(1):95-97(in Chinese)
[5] 丛小青, 刘梦仙, 乌骏. 直线-共轭内啮合齿轮泵的设计方法[J]. 排灌机械工程学报, 2008, 26(1):33-36 CONG Xiaoqing, LIU Mengxian, WU Jun. Design Method of Straight-Conjugate Internal Gear Pump[J]. Drainage & Irrigation Machinery, 2008, 26(1):33-36(in Chinese)
[6] 毕晴春, 凌俊杰, 张策,等. IGP型高压低噪声内啮合齿轮泵结构特点分析[J]. 机床与液压, 2010, 38(2):50-52 BI Qingchun, LING Junjie, ZHANG Ce, et al. Analysis on Structure Feature of IGP High Pressure Low Noise Internal Gear Pump[J]. Machine Tool & Hydraulics, 2010, 38(2):50-52(in Chinese)
[7] 闻德生, 刘忠迅, 刘巧燕,等. 平衡式双定子泵流量脉动理论分析[J]. 上海交通大学学报, 2014, 48(8):1155-1158 WEN Desheng, LIU Zhongxun, LIU Qiaoyan, et al. Theoretical Analysis of Flow Pulsation of Balanced Double-Stator Multi-Pump[J]. Journal of Shanghai Jiaotong University, 2014, 48(8):1155-1158(in Chinese)
[8] 闻德生, 杨杰, 郑珍泉,等. 双定子对称型多泵多速马达理论特性分析[J]. 农业机械学报, 2014, 45(7):321-324 WEN Desheng, YANG Jie, ZHENG Zhenquan, et al. Theory Analyses of Double Stator Symmetrical Type Multi-pump and Multi-Speed Motor[J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(7):321-324(in Chinese)
[9] 闻德生, 吕世君, 杜孝杰,等. 双定子液压马达差动连接理论分析[J]. 农业机械学报, 2011, 42(9):219-224 WEN Desheng, LYU Shijun, DU Xiaojie, et al. Theoretical Analysis of Differential Connection of Double-Stator Hydraulic Motor[J]. Trans of the Chinese Society for Agricultural Machinery, 2011, 42(9):219-224(in Chinese)
[10] 闻德生, 张少波, 王远,等. 双作用滑块型双定子马达内漏特征与优化[J]. 排灌机械工程学报, 2013, 31(3):242-247 WEN Desheng, ZHANG Shaobo, Wang Yuan, et al. Characteristics of Internal Leakage in Double-Acting Double-Stator Slider Motors and Optimization[J]. Journal of Drainage & Irrigation Machinery Engineering, 2013, 31(3):242-247(in Chinese)
[11] 王京. 直齿圆柱渐开线多输出内啮合齿轮泵的研究[D]. 秦皇岛:燕山大学,2017 WANG Jing. Research on Straight-Cylindrical Involute Multi-Output Internal Gear Pump[D]. Qinhuangdao, Yanshan University, 2017(in Chinese)
[12] 刘大威. 液压泵输出流量脉动控制及其应用研究[D]. 长春:吉林大学, 2013 LIU Dawei. Study on the Output Flow Pulsation Control of Hydraulic Pump and Its Application[D]. Changchun, Jilin University, 2013(in Chinese)
[13] 李树立, 焦宗夏. 叶片式摆动液压马达泄漏计算与控制[J]. 液压与气动, 2005(11):67-68 LI Shuli, JIAO Zongxia. Leakage Calculation and Control of Vane Hydraulic Swing Motor[J]. Chinese Hydraulics & Pneumatics, 2005(11):67-68(in Chinese)
[14] 罗骥, 吴盛林, 袁子荣,等. 内啮合齿轮泵内部泄漏流量的建模与实验[J]. 机床与液压, 2005(8):106-107 LUO Ji, WU Shenglin, YUAN Zirong, et al. Modeling and Experiment of Leakage Flow in Internal Gear Pump[J]. Machine Tool & Hydraulics, 2005(8):106-107(in Chinese)
[15] 朱佳斌. 内啮合齿轮泵浮动侧板的结构分析与设计[D]. 兰州:兰州理工大学, 2010 ZHU Jiabin. Analysis and Design of the Structures of the Internal Gear Pump's Floating Plate[D]. Lanzhou, Lanzhou University of Technology, 2010(in Chinese)
[16] LUO J, SHENG LIN W U, YUAN Z R, et al. Modeling and Experiment of Leakage Flow in Internal Gear Pump[J]. Machine Tool & Hydraulics, 2005