|
|
论文:2018,Vol:36,Issue(6):1216-1223 |
|
|
引用本文： |
|
|
韩飞燕, 魏娟, 冯斌, 张武. 基于模板轨迹映射的叶轮流道拟三角型高效路径规划方法[J]. 西北工业大学学报 |
|
|
Han Feiyan, Wei Juan, Feng Bin, Zhang Wu. A High-Efficiency Impeller Channel Quasi-Triangular Tool Path Planning Method Based on Template Trajectory Mapping[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 基于模板轨迹映射的叶轮流道拟三角型高效路径规划方法 |
|
| 韩飞燕, 魏娟, 冯斌, 张武 |
|
| 西安科技大学 机械工程学院, 陕西 西安 710054 |
| 摘要: |
| 整体叶轮的制造技术是衡量一个国家制造能力的重要标志，其制造过程涉及复杂自由曲面加工，而刀具路径规划是自由曲面加工的关键问题之一。针对整体叶轮流道加工的刀具路径规划，提出一种基于参数域模板轨迹映射的拟三角型高效路径规划方法。核心思想是通过在参数域定义模板形式的加工轨迹，借助参数域到物理域的映射模型，将模板轨迹映射到物理域来计算实际加工的走刀路径。首先，利用变形映射技术，建立参数域到物理域的映射模型，并给出参数域模板形式走刀轨迹的映射方法；然后，在参数域中确定叶轮流道的清根边界，并定义叶轮流道的拟三角型模板轨迹；最后，以某叶轮为例，计算了叶轮流道加工的拟三角型刀具路径，并将该方法的刀具路径计算时间与传统的等距偏置方法进行对比，结果表明提升了45%的计算效率，为叶轮零件数控加工刀具路径的快速获取提供了一种新方法。此外，进行了仿真与实际加工验证，结果表明叶轮流道表面的实际切痕形状呈拟三角型形状，说明所提出的走刀轨迹规划方法是有效可行的。 |
| 关键词:
参数域
模板轨迹
映射模型
整体叶轮流道
拟三角型轨迹
|
|
| A High-Efficiency Impeller Channel Quasi-Triangular Tool Path Planning Method Based on Template Trajectory Mapping |
|
| Han Feiyan, Wei Juan, Feng Bin, Zhang Wu |
|
| College of Mechanical Engineering, Xi'an University of Science and Technology, Xi'an 710054, China |
| Abstract: |
| The manufacturing technology of an integral impeller is an important indicator for measuring the manufacturing capability of a country. Its manufacturing process involves complex free-form surface machining, a time consuming and error-prone process, and the tool path planning is considered as a critical issue of free-form surface machining but still lacks a systematic solution. In this paper, aiming at the tool path planning of the impeller channel, a quasi-triangular tool path planning method based on parametric domain template trajectory mapping is proposed. The main idea is to map the template trajectory to physical domain by using the mapping model of parametric domain to the physical domain to obtain the actual machining path. Firstly, the trajectory mapping model of parametric domain to physical domain is established using the morphing technique, and the template trajectory mapping method in the parametric domain is given. Secondly, the clean-up boundary of the impeller channel is determined in the parametric domain, and the quasi-triangular template trajectory of the impeller channel is defined. Finally, taking a certain type of impeller as an example, the quasi-triangular tool path of the impeller channel is calculated, and the tool path calculation time of this method is compared with that of the traditional isometric offset method. The result shows that the computational efficiency is improved by 45% with this method, which provides a new method for the rapid acquisition of NC machining tool path for impeller channels. In addition, the simulation and actual machining are carried out, the results show that the shape of actual cutting traces on the surface of the impeller channel is quasi-triangular, showing that this method is effective and feasible. |
| Key words:
computational efficiency parametric domain
template trajectory
mapping model
impeller channel
quasi-triangular tool path planning
|
|
| 收稿日期: 2018-01-16
修回日期:
|
| DOI: |
| 基金项目: 中国博士后科学基金面上项目（2018M633537）、陕西省自然科学基础研究计划（2018JQ5086）、陕西省教育厅专项基金（2018JK0510）与国家重点研发计划（2017YFC0804310）资助 |
| 通讯作者:
Email： |
| 作者简介: 韩飞燕(1983-),女,西安科技大学讲师,主要从事复杂曲面计算机辅助制造及多轴数控加工理论研究。
|
|
| 相关功能 |
|
|
|
|
| 作者相关文章 |
|
| 韩飞燕 在本刊中的所有文章 |
| 魏娟 在本刊中的所有文章 |
| 冯斌 在本刊中的所有文章 |
| 张武 在本刊中的所有文章 |
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] Chu Chihhsing, Chen Jangting. Tool Path Planning for Five-Axis Flank Milling with Developable Surface Approximation[J]. International Journal of Advanced Manufacturing Technology, 2006, 29(7):707-713
[2] Chu Chihhsing, Huang Waynen, Li Yuwei. An Integrated Framework of Tool Path Planning in 5-Axis Machining of Centrifugal Impeller with Split Blades[J]. Journal of Intelligent Manufacturing, 2012, 23(3):687-698
[3] Lim P. Optimization of the Rough Cutting Factors of Impeller with Five-Axis Machine Using Response Surface Methodology[J]. International Journal of Advanced Manufacturing Technology, 2009, 45(7):821-828
[4] 樊宏周, 席光. 基于平底刀端铣的叶轮流道底面精铣算法研究[J]. 机械工程学报, 2011, 47(11):148-154 Fan Hongzhou, Xi Guang. Algorithm Investigation for Numerical Control End Milling of Centrifugal Impeller Channels[J]. Journal of Mechanical Engineering, 2011, 47(11):148-154(in Chinese)
[5] Fan H Z, Xi G, Wang W, et al. An Efficient Five-Axis Machining Method of Centrifugal Impeller Based on Regional Milling[J]. International Journal of Advanced Manufacturing Technology, 2016, 87(1/2/34):789-799
[6] Chu Chihhsing, Wu Pinghan, Lei Weitai. Tool Path Planning for 5-Axis Flank Milling of Ruled Surfaces Considering CNC Linear Interpolation[J]. Journal of Intelligent Manufacturing, 2012, 23(3):471-480
[7] Wu Baohai, Liang Mancang, Zhang Y, et al. Optimization of Machining Strip Width Using Effective Cutting Shape of Flat-End Cutter for Five-Axis Free-Form Surface Machining[J]. International Journal of Advanced Manufacturing Technology, 2018, 94(5/6/7/8):2623-2633
[8] Zou Qiang, Zhao Jibin. Iso-Parametric Tool-Path Planning for Point Clouds[J]. Computer-Aided Design, 2013, 45(11):1459-1468
[9] Ren Fei, Sun Yuwen, Guo Dongming. Combined Reparameterization-Based Spiral Toolpath Generation for Five-Axis Sculptured Surface Machining[J]. International Journal of Advanced Manufacturing Technology, 2009, 40(7):760-768
[10] Zhou Bo, Zhao Jibin, Li Lun. CNC Double Spiral Tool-Path Generation Based on Parametric Surface Mapping[J]. Computer-Aided Design, 2015, 67(10):87-106
[11] Han Feiyan, Zhang, Dinghua Luo Ming, et al.Optimal CNC Plunge Cutter Selection and Tool Path Generation for Multi-Axis Roughing Free-Form Surface Impeller Channel[J]. The International Journal of Advanced Manufacturing Technology, 2014, 71(9/10/11/12):1801-1810
[12] 梁全, 王永章, 富宏亚,等. 直纹面叶轮插铣加工关键技术[J]. 计算机集成制造系统, 2010, 16(1):182-187 Liang Quan, Wang Yongzhang, Fu Hongya, et al. Key Technologies in Ruling Surface Impeller Plunge Milling[J]. Computer Integrated Manufacturing Systems, 2010, 16(1):182-187(in Chinese)
[13] Zeng Xiongzhi, Yan Changya, Yu Juan, et al. HybridCAM:Tool Path Generation Software for Hybrid Manufacturing[C]//International Conference on Intelligent Robotics and Applications. Springer, Cham, 2017:877-889
[14] Jung Hyounchul, Son Hwangjin, Jung Yoongyo. Development of Tool-Path Generation Module for 5-Axis Control Machining of Impellers[J]. Journal of Central South University of Technology, 2012(12):3424-3429
[15] 韩飞燕, 张定华, 吴宝海, 等. 基于变形映射的多轴粗加工工序模型建立方法[J]. 机械工程学报, 2017, 53(3):155-161 Han Feiyan, Zhang Dinghua, Wu Baohai, et al. Morphing Technology for Generating Intermediate Roughing Models in Multi-Axis Machining[J]. Journal of Mechanical Engineering, 2017, 53(3):155-161(in Chinese)
[16] 吴宝海, 韩飞燕, 杨建华, 等. 叶轮流道非正交四轴加工的刀轴控制方法[J]. 中国机械工程, 2012, 23(21):2546-2551 Wu Baohai, Han Feiyan, Yang Jianhua, et al. Tool Axis Control Method for Impeller Tunnel Milling Using Non-orthogonal 4-axis Machine[J]. China Mechanical Engineering, 2012, 23(21):2546-2551(in Chinese) |
|
|
|
|
|
|
|
