论文:2018,Vol:36,Issue(6):1093-1101
引用本文:
张龙, 贾普荣, 王波, 徐斌. 考虑弯扭耦合效应的复合材料叶片铺层优化方法[J]. 西北工业大学学报
Zhang Long, Jia Purong, Wang Bo, Xu Bin. Optimization Method of Composite Blade Lay-up Considering Bent-Twist Coupling Effect[J]. Northwestern polytechnical university

考虑弯扭耦合效应的复合材料叶片铺层优化方法
张龙1, 贾普荣1, 王波2, 徐斌1
1. 西北工业大学 力学与土木建筑学院, 陕西 西安 710072;
2. 西北工业大学 航空学院, 陕西 西安 710072
摘要:
在复合材料叶片设计中,可利用弯扭耦合效应进行铺层优化设计,通过减小叶片气动弹性外形的改变来提高叶片结构的效率。将复合材料叶片简化为对称非均衡悬臂层合板,基于经典层合板理论提出刚度权值和载荷系数2个分析参数。并采用试验和有限元模拟分析了弯扭耦合效应中分析参数对结构变形的影响。进一步以刚度权值的可行域为约束条件,叶片曲率最小为目标函数,对含有0°,90°和±45°铺层的对称层合板进行分析计算,得到关于载荷系数的刚度权值最优路径。并以16层对称层合板为例进行了验证计算。通过对刚度权值最优路径的逆向计算,能够快速得到满足设计条件的最优铺层顺序。该方法可为复合材料叶片的铺层优化设计提供一定的参考和依据。
关键词:    复合材料    对称非均衡    弯扭耦合效应    铺层设计   
Optimization Method of Composite Blade Lay-up Considering Bent-Twist Coupling Effect
Zhang Long1, Jia Purong1, Wang Bo2, Xu Bin1
1. School of Mechanics, Civil Engineering and Architecture, Northwestern Polytechnical University, Xi'an 710072, China;
2. School of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China
Abstract:
In the design of composite blades, the bent-twist coupling effect can be used to reduce the aeroelastic deformation of the blades by lay-up optimization design to improve the efficiency of blade structure. In this paper, the composite blade was simplified as symmetric unbalanced cantilever laminate, and based on the classical laminated theory(CLT), two analysis parameters are proposed:the stiffness weights and load factors. The influence of the two analysis parameters on the structural deformation of the bent-twist coupling effect is studied by experiments and finite element analysis(FEA). The symmetrical laminated plates containing 0°,90° and ±45° plies were analyzed and calculated with the feasible region of stiffness weights as the constraint condition and the minimum blade curvature as the objective function, and the optimal path of the stiffness weights relate to the load factors was obtained. A 16-plies symmetric laminated plate was used as an example to verify the optimal path of the stiffness weights. By the inverse calculation of the optimal path of the stiffness weights, the optimal ply sequences can be obtained. The method of this paper may provide some references and basis for the optimal design of the composite blades.
Key words:    composite material    symmetric unbalanced    bent-twist coupling effect    lay-up design   
收稿日期: 2017-09-28     修回日期:
DOI:
基金项目: 国家自然科学基金(51475372)资助
通讯作者:     Email:
作者简介: 张龙(1988-),西北工业大学博士研究生,主要从事先进复合材料结构力学性能研究。
相关功能
PDF(1795KB) Free
打印本文
把本文推荐给朋友
作者相关文章
张龙  在本刊中的所有文章
贾普荣  在本刊中的所有文章
王波  在本刊中的所有文章
徐斌  在本刊中的所有文章

参考文献:
[1] Coroneos R M. Structural Analysis and Optimization of a Composite Fan Blade for Future Aircraft Engine[R]. NASA/TM-2012-217632
[2] 张帅,朱锡,孙海涛,等. 船用复合材料螺旋桨研究进展[J]. 力学进展, 2012, 42(5):620-633 Zhang Shuai, Zhu Xi, Sun Haitao, et al. Review of Researches on Composite Marine Propellers[J]. Advances in Mechanics, 2012, 42(5):620-633(in Chinese)
[3] Chamis C C, Blankson I M. Exo-Skeletal Engine:Novel Engine Concept[R]. NASA/TM-2004-212621
[4] Latife K, Galib A, Christos C C. Structural Evaluation of Exoskeletal Engine Fan Blades[R]. AIAA-2003-1861
[5] Galib A, Christos C. Durability and Damage Tolerance Evaluation of a Composite Rotor for Advanced Engine Applications[R]. AIAA-2005-1834
[6] Luczak M, Manzato S, Peeters B, et al. Experimental Verification of the Implementation of Bend-Twist Coupling in a Wind Turbine Blade[C]//Proceedings of European Wind Energy Association, 2011
[7] Amoo L M. On the Design and Structural Analysis of Jet Engine Fan Blade Structures[J]. Progress in Aerospace Sciences, 2013, 60:1-11
[8] Young Y L. Dynamic Hydroelastic Scaling of Self-Adaptive Composite Marine Rotors[J]. Composite Structures, 2010, 92(1):97-106
[9] 周邢银,安利强,王璋奇. 对称非均匀层合板梁的弯扭耦合效应[J]. 复合材料学报, 2017, 34(7):1462-1468 Zhou Xingyin, An Liqiang, Wang Zhangqi. Bend-twist Coupling Effect of Symmetric Un-Uniform Laminate Plate Beam[J]. Act Materiae Compositae Sinica, 2017, 34(7):1462-1468(in Chinese)
[10] 彭峰. 铺层参数对碳纤维船用螺旋桨性能影响研究[D]. 武汉:武汉理工大学, 2014 Peng Feng. The Study of Laying Parameters Influences on the Performance of Carbon Fiber Marine Propeller[D]. Wuhan, Wuhan University of Technology, 2014(in Chinese)
[11] Xiao J, Chen Y, Zhu Q, et al. A General Ply Design for Aero Engine Composite Fan Blade[C]//Proceedings of ASME Turbo Expo 2017:Turbomachinery Technical Conference and Exposition, 2017
[12] Abdul M K, Daniel O A, Vinay D, et al. Effects of Bend-Twist Coupling on Composite Propeller Performance[J]. Mechanics of Composite Materials and Structures, 2010, 7(4):383-401
[13] Mark C. Design Limits of Bend Twist Coupled Wind Turbine Blades[R]. AIAA-2012-1501
[14] Liu Z, Young Y L. Utilization of Bend-twist Coupling for Performance Enhancement of Composite Marine Propellers[J]. Journal of Fluids and Structures, 2009, 25(6):1102-1116
[15] Young Y L. Fluid-Structure Interaction Analysis of Flexible Composite Marine Propellers[J]. Journal of Fluids and Structures, 2008, 24(6):799-818