论文:2017,Vol:35,Issue(2):333-338
引用本文:
韩忠英, 黄小光, 王黎明. 基于损伤演化律的腐蚀疲劳寿命预测方法及应用[J]. 西北工业大学学报
Han Zhongying, Huang Xiaoguang, Wang Liming. The Application of Life Prediction Method for Corrosion Fatigue Based on Damage Evolution Law[J]. Northwestern polytechnical university

基于损伤演化律的腐蚀疲劳寿命预测方法及应用
韩忠英1, 黄小光2, 王黎明2
1. 中国石油大学 石油工程学院, 青岛 266580;
2. 中国石油大学 储运与建筑工程学院, 青岛 266580
摘要:
针对腐蚀疲劳寿命预测解析与试验方法的不足,提出一种基于损伤演化的腐蚀疲劳寿命工程预测方法。综合考虑最大应力控制的应力腐蚀损伤与应力幅值主导的疲劳损伤对腐蚀疲劳寿命的影响,引入非线性累积损伤指数,构建腐蚀疲劳损伤演化律模型。阐述了所提方法的基本思想和主要实现方法,并应用上述方法对超高强度抽油杆FG20(16Mn2SiCrMoVTiA)钢和LY12CZ铝合金的腐蚀疲劳问题进行了研究,分析了不同材料腐蚀疲劳模型损伤参数的变化。
关键词:    腐蚀疲劳    预测方法    非线性累积    损伤演化律   
The Application of Life Prediction Method for Corrosion Fatigue Based on Damage Evolution Law
Han Zhongying1, Huang Xiaoguang2, Wang Liming2
1. School of Petroleum Engineering, China University of Petroleum, Qingdao 266580, China;
2. College of Pipeline and Civil Engineering, China University of Petroleum, Qingdao 266580, China
Abstract:
In view of the shortage of analytical and test methods for corrosion fatigue life prediction, an engineering applicable life prediction method based on damage evolution theory is proposed. Comprehensively considering the influences of the stress corrosion damage controlled by mean stress and fatigue damage controlled by stress amplitude on corrosion fatigue life, a non-linear damage index is introduced to establish the nonlinear accumulation evolution law of corrosion fatigue damage. The basic ideas and the main implementation details of the proposed method are presented. The method is applied to analyze the corrosion fatigue behavior of super-strength sucker rod steel FG20 (16Mn2SiCrMoVTiA) and LY12CZ aluminum alloy in the corrosive liquid, and the variations of damage parameters with materials and fatigue loads are obtained.
Key words:    corrosion fatigue    prediction method    nonlinear accumulation    damage evolution law   
收稿日期: 2016-08-30     修回日期:
DOI:
基金项目: 国家自然科学基金(51404286)与山东省自然科学基金(ZR2014EEQ018)资助
通讯作者:     Email:
作者简介: 韩忠英(1979-),女,中国石油大学讲师,主要从事石油工程相关领域的教学和科研研究。
相关功能
PDF(1148KB) Free
打印本文
把本文推荐给朋友
作者相关文章
韩忠英  在本刊中的所有文章
黄小光  在本刊中的所有文章
王黎明  在本刊中的所有文章

参考文献:
[1] Zhao W M, Xin R F, He Z R, Wang Y. Contribution of Anodic Dissolution to the Corrosion Fatigue Crack Propagation of X80 Steel in 3.5 wt.% NaCl Solution[J]. Corrosion Science, 2012, 63:387-392
[2] Ohata, M, Fukahori, T, Minami, F. Damage Model for Predicting the Effect of Steel Properties on Ductile Crack Growth Resistance[J]. International Journal of Damage Mechanics, 2010, 19:441-459
[3] Kermanidis A T, Petroyianis P V, Pantelakis S G. Fatigue and Damage Tolerance Behavior of Corroded 2024 T351 Aircraft Aluminum Alloy[J]. Theoretical and Applied Fracture Mechanics, 2005, 43 (1):121-132
[4] 张海威,何宇廷, 范超华,等. 腐蚀/疲劳交替作用下飞机金属材料疲劳寿命计算方法[J]. 航空学报, 2013, 34(5):1114-1121 Zhang Haiwei, He Yuting, Fan Chaohua, et al. Fatigue Life Prediction Method for Aircraft Metal Material under Alternative Corrosion/Fatigue Process[J]. Acta Aeronautica et Astronautica Sinica, 2013, 34(5):1114-1121 (in Chinese)
[5] 姚新华,何耀辉. 材料腐蚀疲劳寿命估算方法探讨[J]. 材料研究与应用, 2011, 5(1):45-48 Yao Xinhua, He Yaohui. The Study on Estimating Method of Material Corrosion Fatigue Life[J]. Materials Research and Application, 2011, 5(1):45-48 (in Chinese)
[6] Sriraman M R, Pidaparti R M. Crack Initiation Life of Materials Under Combined Pitting Corrosion and Cyclic Loading[J]. Journal of Materials Engineering and Performance 2010, 19(1), 7-12
[7] 王荣. 金属材料的腐蚀疲劳[M]. 西安:西北工业大学出版社,2001 Wang Rong. Corrosion Fatigue of Metal Materials[M]. Xi'an, Northwestern Polytechnical University Press, 2001 (in Chinese)
[8] Huang X G, Xu J Q, Feng M L. Energy Principle of Corrosion Environment Accelerating Crack Growth of Anodic Dissolution Corrosion Fatigue[J]. Journal of Shanghai Jiaotong University(Science), 2013, 18(2):190-196
[9] Rice J R. Dislocation Nucleation from a Crack Tip:an Analysis Based on the Peierls Concept[J]. Journal of the Mechanics and Physics of Solids, 1992, 40(2):239-271
[10] 刘立名,段梦兰,柳春图,等. 对裂纹扩展规律Paris公式物理本质的探讨[J]. 力学学报,2003,35(2):171-175 Liu Liming, Duan Menglan, Liu Chuntu, et al. On the Physical Nature of the Paris Law[J]. Acta Mechanica Sinica, 2003, 35(2):171-175 (in Chinese)
[11] 刘晶晶,孙俊君,胡海云,等. 海洋腐蚀条件下材料环境失效的寿命预测[J]. 物理学报,2005,54(5):2414-2417 Liu Jingjing, Sun Junjun, Hu Haiyun, et al. The Life Prediction for Materials under the Corrosion of Seawater[J]. Acta Physica Sinica, 2005, 54(5):2414-2417 (in Chinese)
[12] GB/T6398-2000. 金属材料裂纹扩展速率试验方法[S]. 北京:国家质量技术监督局,2000
[13] 纪冬梅,周昌玉,汪蕊. 基于人工神经网络和Monte-Carlo方法的腐蚀疲劳剩余寿命及其可靠度计算[J]. 压力容器,2002,19(6):23-25 Ji Dongmei, Zhou Changyu, Wang Rui. Application of Artificial Neural Networks in Calculation of Residual Life and Reliability in Corrosion Fatigue[J]. Pressure Vessel Technology, 2002, 19(6):23-25 (in Chinese)
[14] 徐可君,江龙平,隋育松. 预测腐蚀疲劳寿命的概率方法[J]. 机械强度,2003,25(2):229-232 Xu Kejun, Jiang Longping, Sui Yusong. Probability Approach for Prediction of Corrosion Fatigue Life[J]. Journal of Mechanical Strength, 2003, 25(2):229-232 (in Chinese)
[15] 苏维国,穆志韬,刘涛,等. 基于损伤检测的腐蚀疲劳寿命预测概率模型[J]. 装备环境工程,2009,6(5):33-38 Su Weiguo, Mu Zhitao, Liu Tao, et al. Probability Model for Prediction of Corrosion Fatigue Life Based on Damage Inspection[J]. Equipment Environmental Engineering, 2009, 6(5):33-38 (in Chinese)
[16] 毋玲. 环境腐蚀及其应力耦合的损伤力学方法和结构性能预测研究[D]. 西安:西北工业大学博士论文,2006 Wu Ling. Damage Mechanics Study of Environment Corrosion Combining with Stress and Prediction of Structure Property[D]. Xi'an, Northwestern Polytechnical University, 2006 (in Chinese)
[17] 毋玲,陈召涛,孙秦. 应力腐蚀损伤裂纹起始寿命计算模型[J]. 机械强度,2004, 26(S):58-59 Wu Ling, Chen Zhaotao, Sun Qin. Damage Mechanics Model for the Initiation Life of Stress Corrosion Cracking[J]. Journal of Mechanical Strength, 2004, 26(S):58-59 (in Chinese)
[18] Chaboche J L. Continuous Damage Mechanics-A Tool to Describe Phenomena before Crack Initiation[J]. Nuclear Engineering and Design, 1981, 64(2):233-247
[19] Zhang G D, Zhao Y F, Xue F, et al. Creep-Fatigue Interaction Damage Model and Its Application in Modified 9Cr-1Mo Steel[J]. Nuclear Engineering and Design, 2011, 241(12):4856-4861
[20] 黄小光,曹宇光,韩忠英,等. 一种基于损伤演化的腐蚀疲劳寿命预测方法理[P]. 中国专利:ZL201410008876.0 Huang Xiaoguang, Cao Yuguang, Han Zhongying, et al. A Life Prediction Method of Corrosion Fatigue Based on Damage Evolution[P]. Chinese Patent, ZL201410008876.0 (in Chinese)
[21] HB5254-83. 变形铝合金拉伸应力腐蚀试验方法[S]. 北京:中华人民共和国航空工业部,1983 HB5254-83. Test Method for Tensile Stress Corrosion of Deformed Aluminum Alloys[S]. Beijing, Ministry of Aviation Industry of the People's Republic of China, 1983 (in Chinese)
[22] GB/T20120.1-2006. 金属与合金的腐蚀-腐蚀疲劳试验第Ⅰ部分:循环失效试验[S]. 北京:国家质量技术监督局,2006 GB/T20120.1-2006. Corrosion of Metals and Alloys-Corrosion Fatigue Testing-PartⅠ:Cycles to Failure Testing[S]. Beijing, State Bureau of Quality and Technical Supervision, 2006 (in Chinese)
[23] 周鹤法,张晓东,张强. D级抽油杆用20CrMo钢疲劳试验[J]. 石油机械,1996,24(4):27-29 Zhou Hefan, Zhang Xiaodong, Zhang Qiang. Fatigue Test of 20CrMo Steel for Grade D Sucker Rod[J]. China Petroleum Machinery, 1996, 24(4):27-29 (in Chinese)