论文:2014,Vol:32,Issue(4):618-623
引用本文:
王治武, 陈星谷, 郑龙席, 彭畅新, 卢杰. 不同类型射流起爆爆震波特性的数值研究[J]. 西北工业大学
Wang Zhiwu, Chen Xinggu, Zheng Longxi, Peng Changxin, Lu Jie. Numerical Research of the Different Types of Jet Effect on Detonation Initiation Characteristics[J]. Northwestern polytechnical university

不同类型射流起爆爆震波特性的数值研究
王治武, 陈星谷, 郑龙席, 彭畅新, 卢杰
西北工业大学 动力与能源学院, 陕西 西安 710072
摘要:
为了研究不同类型射流对起爆特性的影响,对3种不同类型射流起爆主爆震室中丙烷/空气可燃混合气体的过程进行了数值模拟。结果表明,现有计算条件下,亚声速射流不能在主爆震室中起爆爆震波,而超声速射流和爆震射流能够成功起爆;爆震射流的起爆时间和距离都比超声速热射流的要小;在爆震射流的起爆过程中,爆震射流的形成占用了绝大多数的时间,因此对形成爆震射流这一阶段进行有效的改进将可以减少主爆震管的总起爆时间。
关键词:    爆震波    起爆    射流    数值研究    脉冲爆震发动机   
Numerical Research of the Different Types of Jet Effect on Detonation Initiation Characteristics
Wang Zhiwu, Chen Xinggu, Zheng Longxi, Peng Changxin, Lu Jie
Department of Aero-Engines, Northwestern Polytechnical University, Xi'an 710072, China
Abstract:
In order to investigate the effect of different types of hot jet on detonation initiation characteristics, the detonation initiation process was simulated by employing CFD software. The processes for detonation initiation with jets of different types, including subsonic jet, supersonic jet and detonation jet, were analyzed. Stoichiometric pro-pane-air mixture was used as the fuel-oxidant of the pre-detonator and main detonation tube. The simulation results and their analysis indicated preliminarily that:(1) the propane-air mixture in the main detonation tube could not be initiated with the subsonic jet, but could be initiated with the supersonic jet and detonation jet under the current simulation conditions;(2) the initiation distance and time with the detonation jet were both shorter than those with supersonic jet;(3) the generation of the detonation jet took up most of the time in the detonation initiation process with detonation jet, hence, acceleration of the generation of the detonation jet would reduce the total initiation time of the propane/air in the main detonation tube.
Key words:    computational fluid dynamics    computer simulation    computer software    detonation    detonation initiation    initiators (explosives)    jets    numerical analysis    oxidants    pressure    propane    pulse detonation engines    schematic diagrams    stoichiometry    subsonic flow    supersonic flow    temperature   
收稿日期: 2013-10-30     修回日期:
DOI:
基金项目: 国家自然科学基金(51306153);陕西省自然科学基金(2014JM7258);高等学校博士学科点专项科研基金新教师类资助课题(20116102120027);西北工业大学基础研究基金(NPU-FFR-JCY20130129)资助
通讯作者:     Email:
作者简介: 王治武(1981-),西北工业大学副教授、硕士生导师,主要从事燃烧学、流体力学的研究。
相关功能
PDF(371KB) Free
打印本文
把本文推荐给朋友
作者相关文章
王治武  在本刊中的所有文章
陈星谷  在本刊中的所有文章
郑龙席  在本刊中的所有文章
彭畅新  在本刊中的所有文章
卢杰  在本刊中的所有文章

参考文献:
[1] 严传俊, 范玮. 脉冲爆震发动机原理及关键技术 [M]. 西安: 西北工业大学出版社, 2005 Yan C J, Fan W. Pulse Detonation Engine Principle and Key Issues of Technology [M]. Xi'an, Northwestern Polytechnical University Press, 2005 (in Chinese)
[2] Wang Zhiwu, Yan Chuanjun, Zheng Longxi, Fan Wei. Experimental Study of Ignition and Detonation Initiation in Two-Phase Valveless Pulse Detonation Engines [J]. Combustion Science and Technology, 2009, 181 (10): 1310-1325
[3] Wang Zhiwu, Yan Chuanjun, Fan Wei, Zheng Longxi. Experimental Study of Atomization Effects on Two-Phase Pulse Detonation Engines[J]. Proc IMechE, Part G: Journal of Aerospace Engineering, 2009, 223(G6): 721-728
[4] Kailasanath K. Recent Developments in the Research on Pulse Detonation Engines [J]. AIAA Journal, 2003, 41 (2): 145-159
[5] 李牧. 多循环爆震起爆研究[D]. 西安: 西北工业大学, 2007 Li Mu. Multi-Cycle Detonation Initiation [D]. Xi'an, Northwestern Polytechnical University, 2007 (in Chinese)
[6] Brophy C M, Werner L T S, Sinibaldi J O. Performance Characterization of a Valveless Pulse Detonation Engine [R]. AIAA-2003-1344
[7] Knystautas R, Lee J H S, Moen I O, et al. Direct Initiation of Spherical Detonation by a Hot Turbulent Gas Jet[C] ∥ Seventeenth Symposium (International) on Combustion The Combustion Institute, Pittsburgh, 1979: 1235-1244
[8] Knystautas R, Lee J H, Guirao C M. The Critical Tube Diameter for Detonation Failure in Hydrocarbon-Air Mixtures[J]. Combustion and Flame, 1982, 48: 63-83
[9] Carnasciali F, Lee J H, Knystautas. Turbulent Jet Initiation of Detonation [J]. Combustion and Flame, 1991, 84: 170-180
[10] 李牧, 严传俊. 多爆震室串联热射流起爆实验研究 [J]. 实验流体力学, 2009, 23(4): 92-97 Li Mu, Yan Chuanjun. Hot Jet Initiation of Detonation in Serial Detonation Chambers [J]. Journal of Experiments in Fluid Mechanics, 2009, 23(4): 92-97 (in Chinese)
[11] 于军力, 秦亚欣, 高 歌. 射流点火对爆震管中爆燃转爆震影响的实验[J]. 航空动力学报, 2011, 26(5): 1043-1047 Yu Junli, Qin Yaxin, Gao Ge. Experimental Investigation on Effects of Flame Jet Ignition on Deflagration to Detonation Transition in Tube[J]. Journal of Aerospace Power, 2011, 26(5): 1043-1047 (in Chinese)
[12] 曾 昊, 何立明, 章雄伟, 等. 横向爆震射流起爆爆震过程的数值模拟[J]. 应用力学学报, 2010, 27(3): 543-548 Zeng Hao, He Liming, Zhang Xiongwei, et al. Simulation of Transverse Detonation Jet Initiation Process[J]. Journal of Applied Mechanics, 2010, 27(3): 543-548 (in Chinese)
[13] 曾 昊, 何立明, 章雄伟, 等. 环形射流喷口位置对激波聚焦起爆的影响分析[J]. 推进技术, 2011, 32(3): 437-442 Zeng Hao, He Liming, Zhang Xiongwei, et al. Investigation on the Influence of Jets Spout Location on Detonation Initiation via Imploding Annular Shock Waves[J]. Journal of Propulsion Technology, 2011, 32(3): 437-442 (in Chinese)
[14] 曾 昊, 何立明, 章雄伟, 等. 环形射流初始压力对激波聚焦起爆的影响分析[J]. 航空动力学报, 2010, 25(9): 1964-1970 Zeng Hao, He Liming, Zhang Xiongwei, et al. Investigation on the Influence of Jet Pressure on Detonation Initiation via Imploding Annular Shock Waves[J]. Journal of Aerospace Power, 2010, 25(9): 1964-1970 (in Chinese)
[15] 秦亚欣, 高 歌. 环形爆震波聚焦起爆数值模拟[J]. 航空动力学报, 2011, 26(5): 1037-1042 Qin Yaxin, Gao Ge. Numerical Simulation of Detonation Initiation in a Duct via Imploding Annular Detonation[J]. Journal of Aerospace Power, 2011, 26(5): 1037-1042 (in Chinese)
[16] 王治武, 陈星谷, 郑龙席, 等. 横向射流起爆爆震波数值研究[J]. 推进技术, 2013, 34(3): 422-427 Wang Zhiwu, Chen Xinggu, Zheng Longxi, et al. Numerical Investigation of the Transverse Jet Effects on Detonation Initiation Characteristics[J]. Journal of Propulsion Technology, 2013, 34(3): 422-427 (in Chinese)
相关文献:
1.陈星谷, 王治武, 郑龙席, 彭畅新, 胡明.预爆管布置方式对起爆特性影响的数值模拟研究[J]. 西北工业大学, 2013,31(5): 737-741