|
|
论文:2013,Vol:31,Issue(2):195-199 |
|
|
引用本文: |
|
|
李玉忍, 梁波, 张智慧, 逯九利. 飞机三级式发电机调压系统滑模变结构控制方法研究[J]. 西北工业大学 |
|
|
Li Yuren, Liang Bo, Zhang Zhihui, Lu Jiuli. A Design Method of Voltage Regulator System of Three-Stage Aircraft Generator Based on VSC (Variable Structure Control) with Sliding Mode[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
飞机三级式发电机调压系统滑模变结构控制方法研究 |
|
李玉忍, 梁波, 张智慧, 逯九利 |
|
西北工业大学 自动化学院, 陕西 西安 710072 |
摘要: |
论文在分析飞机三级式发电机组成结构和工作原理的基础上,利用坐标变换,根据发电机运动方程,在MATLAB环境下建立了飞机发电机整体系统的仿真模型。从滑模变结构控制理论出发,提出了一种基于滑模变结构的调压系统设计方法,并在Simulink环境下对其进行了仿真。仿真结果证明所建立模型和所使用的方法是正确的、可行的。 |
关键词:
同步发电机
滑模控制
变结构控制
数学模型
|
|
A Design Method of Voltage Regulator System of Three-Stage Aircraft Generator Based on VSC (Variable Structure Control) with Sliding Mode |
|
Li Yuren, Liang Bo, Zhang Zhihui, Lu Jiuli |
|
Department of Automatic School,Northwestern Polytechnical University,Xi'an 710072,China |
Abstract: |
We analyzed the structure of a synchronous generator of aircraft and,according to the generator's equa-tion of motion, we, using coordinate transformation, established the simulation model of the three-stage synchronousgenerator in the environment of MATLAB. Then,based on the theory of Variable-Structure Control with slidingmode,we proposed a design method of voltage regulator with VSC,and also simulated the model in Simulink. Thesimulation results and their analysis showed preliminarily the correctness and feasiblility of the design method pro-posed by us. |
Key words:
aircraft
computer simulation
design
mathematical models
MATLAB
sliding mode control
syn-chronous generator
variable structure control
|
|
收稿日期: 2012-06-02
修回日期:
|
DOI: |
通讯作者:
Email: |
作者简介: 李玉忍(1962-),西北工业大学教授、博士生导师,主要从事飞机电力系统、电力电子与电力传动等研究。
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] 严仰光. 航空航天器供变电系统. 北京: 航空工业出版社, 1995Yan Yangguang. Aerospace Power Supply and Substation System. Beijing: The Aviation Industry Press, 1995 (in Chinese) [2] 沈颂华. 航空航天器供电系统. 北京: 北京航空航天大学出版社, 2005Shen Songhua. Aerospace Power Supply System. Beijing: Beijing University of Aeronautics and Astronautics Press, 2005(in Chinese) [3] Ong Cheemun. Dynamic Simulation of Electric Machinery: Using MATLAB/Simulink. America: Prentice Hall PTR, 1997 [4] 夏长亮, 刘均华, 俞 为等. 基于扩张状态观测器的永磁无刷直流电机滑模变结构控制. 中国电机工程学报,2006,26(20): 139-143Xia Changliang,Liu Junhua, Yu Wei, et al. Variable Structure Control of BLDCM Based on Extended State Observer. Proceed-ings of the CSEE, 2006, 26(20): 139-143 (in Chinese) [5] 宋受俊,张智慧. 无刷直流电机的结构控制. 中小型电机, 2005, 32(5): 26-29Song Shoujun,Zhang Zhihui. Sliding-Mode Control for Brushless DC Motor. S&M Electric Machines, 2005, 32(5): 26-29(in Chinese) [6] 李林杰, 焦振宏, 时建欣. 基于滑模变结构控制的对转无刷直流电机调速系统. 微特电机, 2010, 10: 44-47Li Linjie,Jiao Zhenhong,Shi Jianxin. Counter Rotating Permanent Magnet Brushless DC Motors Based on Sliding-Mode Varia-ble Structure Control. Small & Special Electrical Machines, 2010, 10: 44-47 (in Chinese) [7] 彭 钢, 周 波. 基于 MATLAB 6. 5 的三级式无刷交流发电机系统的仿真. 2004 年江苏省电工技术学会论文集, 2004Peng Gang,Zhou Bo. Simulation of Three-Stage Brushless AC Generator System Based on MATLAB 6. 5. Electro-Technical In-stitute Proceedings of Jiangsu Province, 2004 (in Chinese) [8] 肖 扬, 刘 刚. 一类变结构系统控制的设计. 北方交通大学学报, 2002, 26(3): 3-7Xiao Yang,Liu Gang. Control Design in a Class of Variable Structure Systems. Journal of Northern Jiaotong University, 2002,26(3): 3-7 (in Chinese) [9] 廖颖熙, 穆新华, 葛红娟. 三级无刷交流发电机调压系统的建模与仿真分析. 仿真技术. 2006, 3: 47-49Liao Yinghua,Mu Xinhua,Ge Hongjuan. Modeling and Simulation Analysis of Three-Stage Brushless AC Generator AutomaticVoltage Regulator. Simulation Technique, 2006, 3: 47-49 (in Chinese) |
|
|
|
相关文献: |
|
|
1.付龙飞, 田广来, 李玉忍, 梁波, 张军利.反馈线性化飞机防滑刹车滑模变结构控制律研究[J]. 西北工业大学, 2013,31(6): 962-966 |
|
|
2.黄汉桥, 黄长强, 赵辉, 曹林平, 翁兴伟.考虑前馈作用的BTT导弹自动驾驶仪设计方法研究[J]. 西北工业大学, 2012,30(3): 307-313 |
|
|
|
|
|
|