|
|
论文:2014,Vol:32,Issue(2):195-200 |
|
|
引用本文： |
|
|
薛小锋, 郑香伟, 李咪咪, 冯蕴雯. 飞行器MSD结构剩余强度可靠性分析研究[J]. 西北工业大学 |
|
|
Xue Xiaofeng, Zheng Xiangwei, Li Mimi, Feng Yunwen. Residual Strength Reliability of MSD Panel on Aircraft Structure[J]. Northwestern polytechnical university |
|
|
|
|
|
|
|
| 飞行器MSD结构剩余强度可靠性分析研究 |
|
| 薛小锋1, 郑香伟2, 李咪咪2, 冯蕴雯1 |
|
1. 西北工业大学 航空学院, 陕西 西安 710072;
2. 中国航空工业集团公司 第一飞机设计研究院, 陕西 西安 710089 |
| 摘要: |
| 飞行器结构的多裂纹是导致结构可靠性降低和破坏的主要原因,在考虑结构多裂纹之间相互影响的基础上对飞行器多裂纹结构进行剩余强度可靠性研究,并探寻影响剩余强度及其可靠性的主要原因。首先通过建立断裂力学有限元模型对飞行器典型MSD(Multiple-Site Damage)壁板结构进行确定性的剩余强度计算;接着在剩余强度和载荷分别服从Weibull分布和正态分布的基础上,建立了MSD壁板的剩余强度可靠性模型;最后通过数值积分对一组2024-T3 MSD壁板进行了剩余强度及其失效概率计算。对比结果显示采用该方法得到的计算结果与试验得到的结构失效概率基本一致。该方法考虑了裂纹间的相互影响、裂纹扩展阻力曲线、剩余强度和载荷的概率分布等方面的因素,可为研究飞行器结构多裂纹现象提供一定的支持。 |
| 关键词:
MSD壁板
有限元
剩余强度
分布
可靠性模型
|
|
| Residual Strength Reliability of MSD Panel on Aircraft Structure |
|
| Xue Xiaofeng1, Zheng Xiangwei2, Li Mimi2, Feng Yunwen1 |
|
1. College of Aeronautics, Northwestern Polytechnical University, Xi'an 710072, China;
2. The First Aircraft Institute, Aviation Industry Corporation of China, Xi'an 710089, China |
| Abstract: |
| Multiple-crack on the aircraft structure is a major cause the influences adversely structure reliability and integrity. An approach which considers interaction of cracks and stable tearing is employed to calculate the residual strength of Multiple-Site Damage(MSD) panel. Fracture mechanism finite element model of a certain MSD panel is used to evaluate the residual strength;both fracture toughness and R-curve are considered. On the basis of Weibull distribution of residual strength and normal distribution of load, the residual strength reliability model is developed. Numerical results of 2024-T3 aluminum alloy MSD panels are compared with the test results. The agreement between analysis and experiment is shown to be reasonable. Comparison indicates preliminarily that the proposed approach can give a better prediction and will be useful for investigating MSD panel on aircraft structure. |
| Key words:
aircraft
aluminum alloys
calculations
crack propagation
crack tips
experiments
failure mechanical
finite element method
fracture mechanics
fracture toughness
mathematical models
mathematical transformations
normal distribution
probability density function
reliability
reliability analysis
stress concentration
stress intensity factors
Weibull distribution
MSD (Multi-Site Damage) panel
reliability model
residual strength
|
|
| 收稿日期: 2013-09-13
修回日期:
|
| DOI: |
| 基金项目: 国家自然科学基金(10577015)资助 |
| 通讯作者:
Email： |
| 作者简介: 薛小锋(1982-),西北工业大学讲师,主要从事飞行器结构可靠性分析与设计研究。
|
|
|
|
|
|
|
|
参考文献: |
|
|
[1] Ooi E T, Yang Z J. A Hybrid Finite Element -Scaled Boundary Finite Element M ethod for Crack P ropagation M odeling[J]. Computer M ethods in Applied M echanics and Engineering, 2010, 199(17 /18 /19 /20): 1178-1192
[2] Pryl Dobromil, Cervenka Jan, Pukl Radomir. Material Model for Finite Element Modelling of Fatigue Crack Growth in Concrete [J]. Procedia Engineering, 2010, 2(1): 203-212
[3] Stanislav Seitl, Zdenek Knesl. Two Parameter Fracture Mechanics: Fatigue Crack Behavior under Mixed Mode Conditions[J]. Engineering Fracture Mechanics, 2008, 75(314): 857-865
[4] Wu X R, Xu W. Strip Yield Crack Analysis for Multiple Site Damage in Infinite and Finite Panels —A Weight Function Approach[J]. Engineering Fracture Mechanics, 2011, 78(14): 2585-2596
[5] 薛小锋, 冯蕴雯, 冯元生. 基于随机有限元法的平面多裂纹结构可靠性研究[J]. 西北工业大学学报, 2012, 30(4):508-511 Xue Xiaofeng, Feng Yunwen, Feng Yuansheng. Exploring Theoretically Reliability of Multiple-Crack Structure by Applying Taylor Stochastic Finite Element Method(TSFEM) [J]. Journal of Northwestern Polytechnical University, 2012, 30(4): 508-511 (in Chinese)
[6] Xue Xiaofeng, Feng Yunwen, Qin Qiang, et al. Residual Strength of Multiple-Site Damage Structure on Aged Aircraft Using Interactions of Dugdale-Type Cracks and Stable Tearing[J]. Advanced Materials Research, 2012, 2(1): 539-543
[7] 应中伟, 冯蕴雯, 薛小锋, 等. 应力场强计算裂纹应力强度因子的方法研究[J]. 机械强度, 2009, 31(1): 117-121 Ying Zhongwei, Feng Yunwen, Xue Xiaofeng, et al. Study of the Cpmputation of Stress Intensity Factor by Stress Field Intensity [J]. Journal of Mechanical Strength, 2009, 31(1): 117-121 (in Chinese)
[8] Ju S H, Liu S H. Determining Stress Intensity Factors of Composites Using Crack Opening Displacement[J]. Composite Structures, 2007, 81: 614-621
[9] De Matos P F P, Nowell D. Numerical Simulation of Plasticity-Induced Fatigue Crack Closure with Emphasis on the Crack Growth Scheme: 2D and 3D Analyses[J]. Engineering Fracture Mechanics, 2008, 75(18): 2087-2114
[10] 薛小锋, 冯蕴雯, 应中伟, 冯元生. 老龄飞机多部位损伤结构的剩余强度研究[J]. 机械科学与技术. 2008, 27 (11 ):1275-1278 Xue Xiaofeng, Feng Yunwen, Ying Zhongwei, Feng Yuansheng. Residual Strength of Multiple-Site Damage Structure Using Interactions of Dugdale-Type Cracks and Stable Tearing[J]. Mechanical Science and Technology for Aerospace Engineering, 2008,27(11): 1275-1278 (in Chinese)
[11] Ang W T, Athanasius L. Dynamic Interaction of Multiple Arbitrarily Oriented Planar Cracks in a Piezoelectric Space: A SemiAnalytic Solution[J]. European Journal of Mechanics-A /Solids, 2011, 30(4): 608-618
[12] 应中伟, 冯蕴雯, 薛小锋, 等. 改进的载荷循环分间隔法计算工程问题中 MSD 裂纹扩展问题的研究[J]. 航空学报, 2008,29(04): 898-902 Ying Zhongwei, Feng Yunwen, Xue Xiaofeng, et al. Improved Division of Cyclic Loading Method for MSD Fatigue Crack Growth in Engineering[J]. Acta Aeronautica et Astronautica Sinica, 2008, 29(04): 898-902 (in Chinese)
[13] Xue Xiaofeng, Feng Yunwen, et al. Research of Plane Multiple Cracks Stress Intensity Factors Based on Stochastic Finite Element Method[J]. Chinese Journal of Aeronautic, 2009, 22(03): 257-261
[14] 应中伟, 冯蕴雯, 薛小锋, 等. 基于断裂力学的多部位损伤结构的剩余强度分析方法研究[J]. 机械强度, 2010, 32(1 ):121-125 Ying Zhongwei, Feng Yunwen, Xue Xiaofeng, et al. Study on Fracture Mechanics Analysis of Residual Strength of Structure with Multiple Site Damage[J]. Journal of Mechanical Strength, 2010, 32(1): 121-125 (in Chinese)
[15] Edson Denner Leonel, Wilson Sergio Venturini. Multiple Random Crack Propagation Using a Boundary Element Formulation [J]. Engineering Fracture Mechanics, 2011, 78(6): 1077-1090
[16] 中国航空科学技术研究院. 飞机结构可靠性分析与设计指南[M]. 西安: 西北工业大学出版社, 1995 Aeronautic Science Technology Institute of China. Analysis and Design Guide of Aircraft Structure Reliability[M]. Xi' an: Northwestern Polytechnical University Press, 1995 (in Chinese)
[17] Broek D, Jeong D Y, Thompson D. Testing and Analysis of Flat and Curved P anels with M ultiple Cracks. Advanced Structural Integrity M ethods for Airframe Durability and Damage Tolerance[C]. P roc FAA/NASA Int Symposium, Hampton, 1994 |
|
|
|
相关文献: |
|
|
1．薛小锋, 冯蕴雯, 冯元生.基于随机有限元法的平面多裂纹结构可靠性研究[J]. 西北工业大学, 2012,30(4): 508-512 |
|
|
|
|
|
|
