Study on Parametric Modeling Method of Modified Tapered Roller Bearing
-
摘要: 为了提高修形圆锥滚子轴承三维模型的创建效率,提出了一种基于ADAMS二次开发的参数化建模方法。通过对修形圆锥滚子进行区域划分,降低了修形滚子数学模型的构建难度,并在ADAMS/VIEW中编写建模宏命令创建修形圆锥滚子轴承三维模型,极大的缩短了建模所需时间。此外通过实例分析,分别将使用该方法和使用Creo创建的轴承三维模型导入ABAQUS,分析其在不同工况下的滚子-滚道接触应力分布。结果表明两类模型的接触应力分布曲线间的平均相对误差均小于1.8%,验证了该方法的准确性。Abstract: In order to improve the efficiency of creating three-dimensional model for modified tapered roller bearing, a parametric modeling method based on ADAMS secondary development is proposed. The difficulty of constructing the model for the modified roller is reduced by dividing the modified tapered roller into several parts, and wrote modeling macro commands in ADAMS/VIEW to create three-dimensional model for modified tapered roller bearing, which greatly shorten the modeling time. In addition, through case analysis, the 3D bearing model created by the present method and Creowas importedinto ABAQUS respectively, and the roller-raceway contact stress with those models under different working conditionswere analyzed. The results show that the average relative error between the contact stress distribution curves of two kinds models is below 1.8%, the accuracy with the present methodwas verified.
-
Key words:
- roller modification /
- parametric modeling /
- mathematical model /
- secondary development
-
表 1 圆锥滚子轴承内外圈主参数
物理意义 参数 物理意义 参数 外圈宽/mm Lw 内圈小径/mm Dn3 外圈大径/mm Dw1 内圈大端面大径/mm Dn1 外圈小径/mm Dw2 内圈小端面大径/mm Dn2 外圈倾角/(°) αw 大挡边与内滚道间
夹角/(°)θ 轴承总宽/mm Lz 内圈宽/mm Ln 内圈大端面宽/mm Ln1 内圈倾角/(°) αn 内圈小端面宽/mm Ln2 表 2 圆锥滚子轴承修形滚子参数
mm 滚子长 滚子大径 滚子小径 球端面半径 Lg Dg1 Dg2 R2 表 3 圆锥滚子轴承修形滚子辅助参数
半锥角/
(°)有效长度/
mm最大修形量/
mm修形后大径/
mm修形后小径/
mmφ Ly δ Dg3 Dg4 表 4 圆锥滚子轴承保持架主参数
物理意义 参数 物理意义 参数 保持架全长/mm Lj 保持架倾角/(°) αj1 保持架大径/mm Dj1 引导挡边倾角/(°) αj2 保持架小径/mm Dj2 兜孔轴向间隙/mm Ld1 保持架厚度/mm Hj 兜孔径向间隙/mm Ld2 表 5 主要操作指令及功能
元件名称 主要操作指令 实现功能 内、外圈 Part create、Revolution create等 实体创建、旋转体创建等 修形滚子 Part create、Revolution create、Frustum create、Sphere create、Cylinder create、
Spline create、Matrix create、Boolean Intersection、Boolean unite、Object copy等实体创建、旋转体创建、圆台体创建、球创建、圆柱创建、样条曲线创建、矩阵创建、布尔与、布尔加、复制对象等 保持架 Part create、Revolution create、Frustum create、Object copy、Boolean cut等 实体创建、旋转体创建、圆台体创建、布尔减等 表 6 两类模型的接触应力分布平均相对误差值
载荷F/kN 最大修形量δ/μm 平均相对误差γ/% 圆弧修形 对数修形 5 25.5600 0.178 1.078 5 10.4560 0.225 1.105 5 4.1245 0.621 1.645 10 25.5600 0.295 0.540 10 10.4560 0.197 1.677 10 4.1245 0.395 1.753 表 7 32310轴承各部分建模/改模时间
轴承元件 建模时间/s 改模时间/s 内外圈 1.5 0.5 滚子 13 10 保持架 14 2 总计 28.5 12.5 -
[1] 王爱林, 王庆九, 汪久根. 对数修形圆锥滚子的接触分析[J]. 机械科学与技术, 2012, 31(5): 836-841WANG A L, WANG Q J, WANG J G. Contact of tapered roller with logarithmic profile[J]. Mechanical Science and Technology for Aerospace Engineering, 2012, 31(5): 836-841 (in Chinese) [2] HARRIS T A, KOTZALAS M N. Rolling bearing analysis[M]. 5th ed. Boca Raton: Taylor & Francis, 2007 [3] XU J, NIU Q B, QI H M, et al. A research on the contact stress of roller bearing based on crowning analysis[J]. Computer Aided Drafting, Design and Manufacturing, 2012, 22(2): 55-58 [4] FUJIWARA H, KAWASE T. Logarithmic profile of rollers in roller bearing and optimization of the profile[J]. Transactions of the Japan Society of Mechanical Engineers, 2006, 72(721): 3022-3029 doi: 10.1299/kikaic.72.3022 [5] ZHANG C, GU L, MAO Y Z, et al. Modeling the frictional torque of a dry-lubricated tapered roller bearing considering the roller skewing[J]. Friction, 2019, 7(6): 551-563 doi: 10.1007/s40544-018-0232-8 [6] 易沫含, 王盈锐, 孙珍惜, 等. 基于ANSYS的双列圆锥滚子轴承预紧力有限元分析[J]. 煤矿机械, 2020, 41(1): 72-74YI M H, WANG Y R, SUN Z X, et al. Finite element analysis of pre-tightening force of double-row tapered roller bearing based on ANSYS[J]. Coal Mine Machinery, 2020, 41(1): 72-74 (in Chinese) [7] SAKAGUCHI T, HARADA K. Dynamic analysis of cage behavior in a tapered roller bearing[J]. Journal of Tribology, 2006, 128(3): 604-611 doi: 10.1115/1.2197527 [8] MARTINEZ R F, LORZA R L, DELGADO A A S, et al. Optimizing presetting attributes by softcomputing techniques to improve tapered roller bearings working conditions[J]. Advances in Engineering Software, 2018, 123: 13-24 doi: 10.1016/j.advengsoft.2018.05.005 [9] 潘俊浩, 卓勇, 连云崧, 等. 硬质合金内冷钻头三维参数化建模研究[J]. 西安交通大学学报, 2015, 49(10): 48-53 doi: 10.7652/xjtuxb201510008PAN J H, ZHUO Y, LIAN Y S, et al. Three-dimensional parametric modeling of carbide internal cooling aiguille[J]. Journal of Xi'an Jiaotong University, 2015, 49(10): 48-53 (in Chinese) doi: 10.7652/xjtuxb201510008 [10] 丁国龙, 沈观成, 周红浪, 等. 汽车转向器摇臂轴非圆齿扇三维参数化建模方法[J]. 机械科学与技术, 2020, 39(8): 1242-1247DING G L, SHEN G C, ZHOU H L, et al. Three-dimensional parametric modeling of non-circular gear sector of automobile steering arm[J]. Mechanical Science and Technology for Aerospace Engineering, 2020, 39(8): 1242-1247 (in Chinese) [11] 董曦, 马健, 刘安庆, 等. 固定式单尾车的系统参数化设计方法研究[J]. 机械科学与技术, 2017, 36(6): 895-902DONG X, MA J, LIU A Q, et al. Study on systematically parametric design method of fixed single tripper[J]. Mechanical Science and Technology for Aeros-pace Engineering, 2017, 36(6): 895-902 (in Chinese) [12] 郭艳朋, 买买提明·艾尼, 王豫鄂, 等. 滚动轴承参数化建模及接触强度分析[J]. 组合机床与自动化加工技术, 2013(8): 19-22 doi: 10.3969/j.issn.1001-2265.2013.08.006GUO Y P, GENI M, WANG Y E, et al. Parametric modeling and contact strength analysis of rolling bearings[J]. Modular Machine Tool & Automatic Manu-facturing Technique, 2013(8): 19-22 (in Chinese) doi: 10.3969/j.issn.1001-2265.2013.08.006 [13] 张磊, 买买提明·艾尼, 徐华, 等. 滚动轴承参数化建模与数值分析系统的研发[J]. 机械设计与制造, 2015(5): 24-28 doi: 10.3969/j.issn.1001-3997.2015.05.007ZHANG L, GENI M, XU H, et al. Research and development of rolling bearing parameter modeling and numerical analysis system[J]. Machinery Design & Manufacture, 2015(5): 24-28 (in Chinese) doi: 10.3969/j.issn.1001-3997.2015.05.007 [14] 胡广存. 汽车轮毂双列圆锥滚子轴承动力学仿真分析[D]. 洛阳: 河南科技大学, 2014HU G C. Dynamic analysis on automobile wheel double-row tapered roller bearings[D]. Luoyang: Henan Unive-rsity of Science and Technology, 2014 (in Chinese) [15] 张军飞. 双列圆锥滚子轴承的动力学分析模型[D]. 大连: 大连理工大学, 2019ZHANG J F. Dynamic analysis model of double-row tapered roller bearing[D]. Dalian: Dalian University of Technology, 2019 (in Chinese) [16] 何贞志. 修形圆锥滚子轴承的接触力学和振动特性研究及应用[D]. 武汉: 华中科技大学, 2014HE Z Z. Research and application of contact mechanics and vibration characteristics of modified tapered roller bearings[D]. Wuhan: Huazhong University of Science and Technology, 2014 (in Chinese)