[1]
|
DONG X, PALMER D, AXINTE D, et al. In-situ repair/maintenance with a continuum robotic machine tool in confined space[J]. Journal of Manufacturing Processes, 2019, 38: 313-318 doi: 10.1016/j.jmapro.2019.01.024
|
[2]
|
WOLF A, BROWN H B, CASCIOLA R, et al. A mobile hyper redundant mechanism for search and rescue tasks[C]//Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems. Las Vegas: IEEE, 2003: 2889-2895
|
[3]
|
苏中, 张双彪, 李兴城. 蛇形机器人的研究与发展综述[J]. 中国机械工程, 2015, 26(3): 414-425 doi: 10.3969/j.issn.1004-132X.2015.03.022SU Z, ZHANG S B, LI X C. Present situation and development tendency of snake-like robots[J]. China Mechanical Engineering, 2015, 26(3): 414-425 (in Chinese) doi: 10.3969/j.issn.1004-132X.2015.03.022
|
[4]
|
XU K, ZHAO J R, ZHENG X D, et al. Configuration comparison among kinematically optimized continuum manipulators for robotic surgeries through a single access port[J]. Robotica, 2015, 33(10): 2025-2044 doi: 10.1017/S0263574714000976
|
[5]
|
LI Z, DU R. Design and analysis of a bio-inspired wire-driven multi-section flexible robot[J]. International Journal of Advanced Robotic Systems, 2013, 10(4): 209 doi: 10.5772/56025
|
[6]
|
LI Z, YU H Y, REN H L, et al. A novel constrained tendon-driven serpentine manipulator[C]//2015 IEEE/RSJ International Conference on Intelligent Robots and Systems. Hamburg, Germany: IEEE, 2015: 5966-5971
|
[7]
|
SHEN T, WARBURTON K, POURGHODRAT A, et al. A novel articulated drive mechanism for multifunctional NOTES robot[J]. Journal of Medical Devices, 2014, 8(3): 030921 doi: 10.1115/1.4027042
|
[8]
|
熊志林, 陶建峰, 刘成良. 改进末端跟随运动的超冗余蛇形臂机器人运动学逆解[J]. 机器人, 2018, 40(1): 37-45 https://www.cnki.com.cn/Article/CJFDTOTAL-JQRR201801005.htmXIONG Z L, TAO J F, LIU C L. Inverse kinematics of hyper-redundant snake-arm robots with improved tip following movement[J]. Robot, 2018, 40(1): 37-45 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JQRR201801005.htm
|
[9]
|
杨文龙, 杜志江, 董为. 一种具有切口结构的连续体机械臂的力学建模[J]. 机器人, 2015, 37(5): 566-572 https://www.cnki.com.cn/Article/CJFDTOTAL-JQRR201505007.htmYANG W L, DU Z J, DONG W. Mechanics modeling of a notched continuum manipulator[J]. Robot, 2015, 37(5): 566-572 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JQRR201505007.htm
|
[10]
|
王海, 付邦晨, 薛彬, 等. 六自由度柔性关节机械臂的动力学分析[J]. 中国机械工程, 2016, 27(8): 1096-1101 doi: 10.3969/j.issn.1004-132X.2016.08.018WANG H, FU B C, XUE B, et al. Dynamics analysis of 6 DOF manipulators with flexible joints[J]. China Mechanical Engineering, 2016, 27(8): 1096-1101 (in Chinese) doi: 10.3969/j.issn.1004-132X.2016.08.018
|
[11]
|
YOON H S, YI B J. A 4-DOF flexible continuum robot using a spring backbone[C]//Proceedings of the 2009 IEEE International Conference on Mechatronics and Automation. Changchun, China: IEEE, 2009: 1249-1254
|
[12]
|
YOON H S, JEONG J H, YI B J. Image-guided dual master-slave robotic system for Maxillary sinus surgery[J]. IEEE Transactions on Robotics, 2018, 34(4): 1098-1111 doi: 10.1109/TRO.2018.2830334
|
[13]
|
KIM Y J, CHENG S B, KIM S, et al. A stiffness-adjustable hyperredundant manipulator using a variable neutral-line mechanism for minimally invasive surgery[J]. IEEE Transactions on Robotics, 2014, 30(2): 382-395 doi: 10.1109/TRO.2013.2287975
|
[14]
|
ZHANG L N, WANG S X, LI J M, et al. A novel reconfigurable unit for high dexterous surgical instrument[M]// DAI J S, ZOPPI M, KONG X W. Advances in Reconfigurable Mechanisms and Robots I. London: Springer, 2012: 433-442
|
[15]
|
DONG X, RAFFLES M, GUZMAN S C, et al. Design and analysis of a family of snake arm robots connected by compliant joints[J]. Mechanism and Machine Theory, 2014, 77: 73-91 doi: 10.1016/j.mechmachtheory.2014.01.017
|
[16]
|
DONG X, RAFFLES M, COBOS-GUZMAN S, et al. A novel continuum robot using twin-pivot compliant joints: design, modeling, and validation[J]. Journal of Mechanisms and Robotics, 2016, 8(2): 021010 doi: 10.1115/1.4031340
|
[17]
|
SUH J W, KIM K Y. Design of a discrete bending joint using multiple unit PREF joints for isotropic 2-DOF motion[J]. International Journal of Control, Automation and Systems, 2017, 15(1): 64-72 doi: 10.1007/s12555-016-0474-z
|
[18]
|
SUH J W, KIM K Y, JEONG J W, et al. Design considerations for a hyper-redundant pulleyless rolling joint with elastic fixtures[J]. IEEE/ASME Transactions on Mechatronics, 2015, 20(6): 2841-2852 doi: 10.1109/TMECH.2015.2389228
|
[19]
|
徐凯, 刘欢. 多杆连续体机构: 构型与应用[J]. 机械工程学报, 2018, 54(13): 25-33 https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201813003.htmXU K, LIU H. Multi-backbone continuum mechanisms: forms and applications[J]. Journal of Mechanical Engineering, 2018, 54(13): 25-33 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201813003.htm
|
[20]
|
WEBSTER Ⅲ R J, JONES B A. Design and kinematic modeling of constant curvature continuum robots: a review[J]. The International Journal of Robotics Research, 2010, 29(13): 1661-1683 doi: 10.1177/0278364910368147
|
[21]
|
NEPPALLI S, JONES B A. Design, construction, and analysis of a continuum robot[C]//Proceedings of the 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems. San Diego, CA, USA: IEEE, 2007: 1503-1507
|