[1]
|
郁永章. 容积式压缩机技术手册[M]. 北京: 机械工业出版社, 2000: 583-613YU Y Z. Technical manual of volumetric compressor[M]. Beijing: Machinery Industry Press, 2000: 583-613 (in Chinese)
|
[2]
|
何雪明, 叶水平, 童洁, 等. 基于B样条曲线的双螺杆压缩机转子型线设计[J]. 机械设计与研究, 2015, 31(5): 133-137 https://www.cnki.com.cn/Article/CJFDTOTAL-JSYY201505042.htmHE X M, YE S P, TONG J, et al. Design of twin screw compressor rotor profiles based on B-spline curve[J]. Machine Design & Research, 2015, 31(5): 133-137 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSYY201505042.htm
|
[3]
|
何雪明, 姜振钢, 武美萍, 等. 双螺杆压缩机转子啮合线与型线关系研究[J]. 中国机械工程, 2017, 28(7): 763-770 doi: 10.3969/j.issn.1004-132X.2017.07.002HE X M, JIANG Z G, WU M P, et al. Research on relationship between rotor profiles and meshing lines in twin-screw compressors[J]. China Mechanical Engineering, 2017, 28(7): 763-770 (in Chinese) doi: 10.3969/j.issn.1004-132X.2017.07.002
|
[4]
|
于嘉川, 何雪明, 龙骥. 双螺杆压缩机转子啮合线对其性能参数的影响[J]. 食品与机械, 2020, 36(3): 109-114 https://www.cnki.com.cn/Article/CJFDTOTAL-SPJX202003024.htmYU J C, HE X M, LONG J. Study on the influence of meshing line of rotors on its performance of twin screw compressor[J]. Food & Machinery, 2020, 36(3): 109-114 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-SPJX202003024.htm
|
[5]
|
龙骥, 何雪明, 吴佳, 等. 螺杆转子型线正向设计中的曲线连续性研究[J]. 机械科学与技术, 2019, 38(2): 190-197 doi: 10.13433/j.cnki.1003-8728.20180151LONG J, HE X M, WU J, et al. Exploring curve continuity in forward design of screw rotor profile[J]. Mechanical Science and Technology for Aerospace Engineering, 2019, 38(2): 190-197 (in Chinese) doi: 10.13433/j.cnki.1003-8728.20180151
|
[6]
|
徐健, 许岭松, 余小玲, 等. 螺杆转子齿形中圆弧——圆弧包络线啮合副的研究[J]. 压缩机技术, 2012(3): 1-6, 24 doi: 10.3969/j.issn.1006-2971.2012.03.001XU J, XU L S, YU X L, et al. Study on meshing pair of circular-circular envelope curve in the profile design of screw rotors[J]. Compressor Technology, 2012(3): 1-6, 24 (in Chinese) doi: 10.3969/j.issn.1006-2971.2012.03.001
|
[7]
|
徐健, 周恩民, 许岭松, 等. 基于啮合线法的螺杆转子型线设计方法[J]. 压缩机技术, 2013(1): 1-7 doi: 10.3969/j.issn.1006-2971.2013.01.001XU J, ZHOU E M, XU L S, et al. Study on rotor profile design of screw compressors based upon meshing line method[J]. Compressor Technology, 2013(1): 1-7 (in Chinese) doi: 10.3969/j.issn.1006-2971.2013.01.001
|
[8]
|
姜建强. 螺杆式压缩机漏泄三角形面积的通用算法[J]. 机械设计与制造, 2009(11): 49-50 doi: 10.3969/j.issn.1001-3997.2009.11.022JIANG J Q. The general algorithm for leakage triangle area of screw compressor[J]. Machinery Design & Manufacture, 2009(11): 49-50 (in Chinese) doi: 10.3969/j.issn.1001-3997.2009.11.022
|
[9]
|
邓培森. NURBS曲线曲面的插值及保形光滑拼接[D]. 武汉: 武汉理工大学, 2013DENG P S. The interpolation and conformal smooth stitching of NURBS curves and surfaces[D]. Wuhan: Wuhan University of Technology, 2013 (in Chinese)
|
[10]
|
焦义, 侯烨, 涂瀚, 等. 螺杆式空气压缩机能耗特性研究[J]. 矿山机械, 2017, 45(12): 1-4 https://www.cnki.com.cn/Article/CJFDTOTAL-KSJX201712001.htmJIAO Y, HOU Y, TU H, et al. Study on energy consumption characteristics of screw air compressor[J]. Mining & Processing Equipment, 2017, 45(12): 1-4 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-KSJX201712001.htm
|