Multi-objective Optimization Design of Cable Net Structure for Deployable Antenna Considering Truss Deformation
-
摘要: 索网结构是可展开天线的重要组成部分，在桁架的支撑下，索网结构的前/后索网和竖向索阵处于张紧状态，形成满足精度要求的工作反射面。本文提出了一种可以考虑桁架变形的索网形态设计方法。首先，基于索网结构的平衡矩阵奇异值分解，约束索段张力并以索力均匀为目标，通过优化求解找到一组最优预张力。将索网挂接在桁架上，以索段的预张力和前索网节点的位置增量为设计变量，以直接与桁架连接索段的张力改变量的均方根值，索段预张力均匀性和反射面形面精度为目标，约束索段张力和节点位置增量的取值范围，建立了索网结构多目标优化模型。最后通过相应算例，验证了方法的正确性。Abstract: The cable net structure is an important part of the deployable antenna, under the support of the truss, its front/rear cable net and vertical cable array are in a tension state, forming a working reflective surface that meets the required precision. In this paper, a design method of cable net considering the deformation of truss is presented. First, based on the singular value decomposition of equilibrium matrix of cable net structure, the tension of cable segment is constrained and the uniformity of cable force is taken as the objective, and a set of optimal tension is found by optimizing solution. Then, the cable net is connected to the truss, the multi-objective optimization model of cable net structure is established by taking the tension and the node position increment as design variables, and taking the root mean square of the tension change of the cable segment directly connected to the truss, the uniformity of the tension and the accuracy of the reflector surface as the objectives, and also constraining the range of the cable segment tension and the node position increment. The method presented is programmed for a corresponding example at last, and the results indicate that the method is feasible.
-
Key words:
- deployable antenna /
- deformation of truss /
- cable net /
- multi-objective optimization
-
[1] TIBERT G. Deployable tensegrity structures for space applications[D]. Stockholm: Royal Institute of Technology, 2002 [2] 段宝岩. 大型空间可展开天线的研究现状与发展趋势[J]. 电子机械工程, 2017, 33(1): 1-14 doi: 10.3969/j.issn.1008-5300.2017.01.001DUAN B Y. The state-of-the-art and development trend of large space-borne deployable antenna[J]. Electro-Mechanical Engineering, 2017, 33(1): 1-14 (in Chinese) doi: 10.3969/j.issn.1008-5300.2017.01.001 [3] SANTIAGO-PROWALD J, BAIER H. Advances in deployable structures and surfaces for large apertures in space[J]. CEAS Space Journal, 2013, 5(3-4): 89-115 doi: 10.1007/s12567-013-0048-3 [4] 牛治永, 王三民, 王磊. 空间桁架可展天线三向索网预张力多目标优化[J]. 机械科学与技术, 2009, 28(3): 330-335 doi: 10.3321/j.issn:1003-8728.2009.03.011NIU Z Y, WANG S M, WANG L. Multiobjective optimization of the pretensioning force in the tri-directional cable net of an Astromesh deployable reflector[J]. Mechanical Science and Technology for Aerospace Engineering, 2009, 28(3): 330-335 (in Chinese) doi: 10.3321/j.issn:1003-8728.2009.03.011 [5] 李刚, 关富玲. 环形桁架可展天线抛物面索网的预拉力优化[J]. 浙江大学学报, 2005, 39(10): 1557-1560, 1643 doi: 10.3785/j.issn.1008-973X.2005.10.022LI G, GUAN F L. Pretension optimization in parabolic cable net of Astromesh deployable reflector[J]. Journal of Zhejiang University, 2005, 39(10): 1557-1560, 1643 (in Chinese) doi: 10.3785/j.issn.1008-973X.2005.10.022 [6] 马亚静, 杜敬利, 段宝岩, 等. 考虑支撑桁架变形的星载索网反射面天线形态设计方法[J]. 机械工程学报, 2015, 51(17): 114-119 https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201517015.htmMA Y J, DU J L, DUAN B Y, et al. A method to design the initial equilibrium state of spaceborne cable-net antenna considering the flexibility of supporting trusses[J]. Journal of Mechanical Engineering, 2015, 51(17): 114-119 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201517015.htm [7] 尤国强, 张杰. 可展开天线中索网结构的形态分析与设计[J]. 工程力学, 2012, 29(11): 306-312 doi: 10.6052/j.issn.1000-4750.2011.03.0129YOU G Q, ZHANG J. Structural analysis and design for cablenet of deployable antenna[J]. Engineering Mechanics, 2012, 29(11): 306-312 (in Chinese) doi: 10.6052/j.issn.1000-4750.2011.03.0129 [8] ZHANG S X, DU J L, WANG W, et al. Two-step structural design of mesh antennas for high beam pointing accuracy[J]. Chinese Journal of Mechanical Engineering, 2017, 30(3): 604-613 doi: 10.1007/s10033-017-0134-0 [9] YANG G G, YANG D W, ZHANG Y Q, et al. Form-finding design of cable-mesh reflector antennas with minimal length configuration[J]. Aerospace Science and Technology, 2017, 63: 9-17 doi: 10.1016/j.ast.2016.11.010 [10] 杨癸庚, 杨东武, 杜敬利, 等. 一种基于力密度的网状可展开天线索网结构初始形态设计方法[J]. 机械工程学报, 2016, 52(11): 34-41 https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201611005.htmYANG G G, YANG D W, DU J L, et al. Method for deployable mesh antenna cable network structures' form-finding design based on force density[J]. Journal of Mechanical Engineering, 2016, 52(11): 34-41 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JXXB201611005.htm [11] 毛国栋, 孙炳楠, 唐志山. 控制网格变形的动力松弛法膜结构找形分析[J]. 浙江大学学报, 2004, 38(5): 598-602 doi: 10.3785/j.issn.1008-973X.2004.05.017MAO G D, SUN B N, TANG Z S. Form-finding of membrane structures by dynamic relaxation controlling mesh distortion[J]. Journal of Zhejiang University, 2004, 38(5): 598-602 (in Chinese) doi: 10.3785/j.issn.1008-973X.2004.05.017 [12] 尤国强, 杨东武. 索网桁架式可展开天线的多目标优化设计[J]. 机械设计与研究, 2008, 24(5): 112-115 https://www.cnki.com.cn/Article/CJFDTOTAL-JSYY200805028.htmYOU G Q, YANG D W. Multi-objective optimization for a cable-truss deployable space antenna[J]. Machine Design and Research, 2008, 24(5): 112-115 (in Chinese) https://www.cnki.com.cn/Article/CJFDTOTAL-JSYY200805028.htm [13] DU J L, ZONG Y L, BAO H. Shape adjustment of cable mesh antennas using sequential quadratic programming[J]. Aerospace Science and Technology, 2013, 30(1): 26-32 doi: 10.1016/j.ast.2013.06.002 [14] DU X L, DU J L, BAO H, et al. Deployment analysis of deployable antennas considering cable net and truss flexibility[J]. Aerospace Science and Technology, 2018, 82-83: 557-565 doi: 10.1016/j.ast.2018.09.038 [15] TIBERT A G, PELLEGRINO S. Deployable tensegrity reflectors for small satellites[J]. Journal of Spacecraft and Rockets, 2002, 39(5): 701-709 doi: 10.2514/2.3867 -
下载:
点击查看大图
图(8) / 表(1)
计量
- 文章访问数: 223
- HTML全文浏览量: 45
- PDF下载量: 22
- 被引次数: 0
