Research on Co-simulation of Machine-liquid-control System of High Voltage Circuit Breaker
-
摘要: 考虑多场耦合作用，为实现双动式断路器机-液-控联合仿真，首先利用C、C#语言分别为液压系统模型、流体仿真模型开发TCP通信的服务端和客户端，利用Fortran语言对瞬态动力学模型进行二次开发，并通过共享内存实现了软件间实时数据交互，成功搭建了整机联合仿真系统。其次，建立液压控制系统、操动机构、灭弧室等仿真模型开展整机联合仿真，对操动机构分闸过程速度特性进行了分析，探讨了蓄能器初始油压对操动机构运动特性的影响。结果表明，联合仿真系统实现了断路器机-液-控联合仿真。Abstract: To realize co-simulation of machine-liquid-control system of high voltage circuit breaker, two servers and clients of TCP communication for hydraulic system model and fluid simulation model were developed by using C and C# programming languages, respectively. The secondary development dynamics model was carried out by using Fortran programming language. The co-simulation system was established to realize the interaction of above software through Shared memory. Secondly, the simulation models of hydraulic control system, operating mechanism and arc extinguishing chamber were built to employ the co-simulation of the circuit breaker. Finally, the velocity characteristics of the operating mechanism in the opening process are analyzed, and the influence of the initial oil pressure of the energy storage cylinder on the movement characteristics of the operating mechanism is discussed. The results show that the co-simulation system realizes the machine-liquid-control co-simulation function.
-
图 2 液压控制系统原理图
1.油箱 2.合闸电磁阀 3.分闸电磁阀 4.合闸电磁阀 5.分闸二级阀 6.主阀 7.液压缸 8.蓄能器 9.单向阀 10.电机 11.油泵 12.过滤 13.溢流阀 14.节流口 15.TCP通信模块
-
[1] 夏亚龙, 林莘, 徐建源, 等.高压六氟化硫断路器触头间动态击穿特性试验研究[J].电工电气, 2016, (4):7-11 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dgdq201604002Xia Y L, Lin Z, Xu J Y, et al. Experimental study on dynamic breakdown characteristics of gap between contacts for high-voltage SF6 circuit breaker[J]. Electrotechnics Electric, 2016, (4):7-11(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dgdq201604002 [2] Liu W, Xu B, Yang H Y, et al. Hydraulic operating mechanisms for high voltage circuit breakers:progress evolution and future trends[J]. Science China Technological Sciences, 2011, 54(1):116-125 doi: 10.1007/s11431-010-4154-6 [3] 付荣荣, 赵莉华, 荣强, 等.高压断路器操作机构机械特性研究[J].高压电器, 2017, 53(5):56-62 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gydq201705009Fu R R, Zhao L H, Rong Q, et al. Study on mechanical characteristics of operating mechanism of high voltage circuit breaker[J]. High Voltage Apparatus, 2017, 53(5):56-62(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gydq201705009 [4] Meng F G, Wu S J, Zhang F, et al. Modeling and simulation of flexible transmission mechanism with multiclearance joints for ultrahigh voltage circuit breakers[J]. Shock and Vibration, 2015, 2015:392328 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=Doaj000004159156 [5] 王连鹏, 王尔智.SF6断路器空载开断下液压操动机构与灭弧室联合仿真研究[J].中国电机工程学报, 2005, 25(20):118-123 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zgdjgcxb200520022Wang L P, Wang E Z. Investigation of joint simulation under no load breaking for hydraulic actoator and arc-quenching chamber of SF6 circuit breaker[J]. Proceedings of the CSEE, 2005, 25(20):118-123(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=zgdjgcxb200520022 [6] 李真.基于ADAMS和Ansys的万能式断路器反回弹冲击载荷下的动力学联合仿真研究[J].低压电器与, 2014, (6):6-8 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dydq201406002Li Z. Research of air circuit breaker anti-rebound dynamic simulation under impact loading based on ADAMS and Ansys[J]. Low Voltage Apparatus, 2014, (6):6-8(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dydq201406002 [7] 徐丹, 吴翊, 陈巧霞, 等.基于ADAMS和Ansys联合仿真的MCCB机构弹簧参数优化[J].电器与能效管理技术, 2017, (1):20-24 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dydq201701004Xu D, Wu Y, Chen Q X, et al. Optimization design of MCCB spring parameters based on the joint simulation of ADAMS and Ansys[J]. Low Voltage Apparatus, 2017, (1):20-24(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dydq201701004 [8] 黎小峰, 巫世晶, 李小勇, 等.高压断路器操动机构动力学特性联合仿真研究[J].华中科技大学学报, 2019, 47(2):70-75 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hzlgdxxb201902013Li X F, Wu S J, Li X Y, et al. Study on dynamic characteristic of operating mechanism of high voltage circuit breaker based on co-simulation[J]. Journal of Huazhong University of Science and Technology, 2019, 47(2):70-75(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=hzlgdxxb201902013 [9] 张晓芳, 袁博, 周燕海, 等.小型断路器分断过程动态仿真分析和试验验证[J].电器与能效管理技术, 2018, (18):58-62 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dydq201818011Zhang X F, Yuan B, Zhou Y H, et al. Dynamic simulation and experimental verification of breaking process of miniature circuit breaker[J]. Low Voltage Apparatus, 2018, (18):58-62(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dydq201818011 [10] 吕军玲, 赵伟涛.高压SF6断路器配弹簧操动机构的开断特性研究[J].高压电器, 2016, 52(10):158-164 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gydq201610027Lyu J L, Zhao W T. Research on interruption characteristics of high voltage SF6 circuit breaker with spring operating mechanism[J]. High Voltage Apparatus, 2016, 52(10):158-164(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gydq201610027 [11] 赵伟涛, 刘超, 党德旺, 等.SF6高压断路器动力学仿真研究[J].电气工程学报, 2019, 14(2):30-37 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dqzz201902006Zhao W T, Liu C, Dang D W, et al. Dynamic simulation research on SF6 high voltage circuit breaker[J]. Journal of Electrical Engineering, 2019, 14(2):30-37(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=dqzz201902006 [12] 王文营.高压SF6断路器液压操动机构运动特性分析[D].沈阳: 沈阳工业大学, 2014Wang W Y. Analyses of hydraulic operating mechanism characteristics for high voltage SF6 circuit breaker[D]. Shenyang: Shenyang University of Technology, 2014(in Chinese) [13] 马曾锐, 赵伟涛.配弹簧机构的高压断路器分闸特性建模与仿真[J].高压电器, 2017, 53(5):109-115 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gydq201705017Ma Z R, Zhao W T. Modeling and simulation on opening characteristic of spring operating mechanism for high voltage SF6 circuit breaker[J]. High Voltage Apparatus, 2017, 53(5):109-115(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=gydq201705017 [14] Zhang B, Guo Y J, Yao Y Q, et al. Optimization design of heater for GIS Circuit breaker in alpine region based on thermal and flow field coupling simulation[C]//Proceedings of 2018 International Conference on Modeling, Simulation and Optimization. Shenzhen: Science and Engineering Research Center, 2018: 379-384 [15] 邓文明, 王俊勇, 苏安社, 等.基于Adams与AMESim联合仿真的动车组主断路器分析及优化[J].机车电传动, 2019, (3):81-84, 89 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jcdcd201903018Deng W M, Wang J Y, Su A S, et al. Analysis and optimization of emus main circuit breaker based on Adams and AMESim joint simulation technology[J]. Electric Drive for Locomotives, 2019, (3):81-84, 89(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jcdcd201903018 [16] 刘超, 赵伟涛, 张强, 等.真空断路器弹簧操动机构机械特性的仿真与优化[J].高压电器, 2019, 55(8):65-71Liu C, Zhao W T, Zhang Q, et al. Simulation and optimization for mechanical characteristics of spring operating mechanism in vacuum circuit breaker[J]. High Voltage Apparatus, 2019, 55(8):65-71(in Chinese) -
下载:
点击查看大图
图(9)
计量
- 文章访问数: 174
- HTML全文浏览量: 34
- PDF下载量: 19
- 被引次数: 0
