火箭发动机精清洗容器的结构设计及内流场特性模拟研究

李中; 刘玉涛

doi:10.13433/j.cnki.1003-8728.20190300

火箭发动机精清洗容器的结构设计及内流场特性模拟研究

doi: 10.13433/j.cnki.1003-8728.20190300

李中,
刘玉涛^,

北京航天试验技术研究所，北京　100074

详细信息

作者简介:
李中（1994−），硕士研究生，研究方向为机械设计及流场分析，644456303@qq.com

通讯作者:
刘玉涛，研究员，硕士生导师，2298591613@qq.com

中图分类号: TK221
计量
- 文章访问数: 223
- HTML全文浏览量: 40
- PDF下载量: 13
- 被引次数: 0
出版历程
- 收稿日期: 2019-07-30
- 网络出版日期: 2020-10-12
- 刊出日期: 2020-10-05

Structural Design and Simulation of Internal Flow Field Characteristic of Precision Cleaning Vessel for Rocket Engine

Li Zhong,
Liu Yutao^,

Beijing Institute of Aerospace Testing Technology, Beijing 100074, China

摘要

摘要: 针对目前火箭发动机精清洗的常用方法，提出了一种60 L清洗容器的设计方法，通过容积计算、外形尺寸计算、强度计算、开孔补强计算、支腿校核计算等，完成图纸的绘制。基于Fluent数值模拟方法，对该清洗容器内流场特性进行仿真，得到全过程可视化压力场云图和速度场云图气液相图。同时，使用多项流模型中的VOF模型，捕捉整个容器内气-液相界面。模拟结果表明，数值模拟的预测与设计要求的预期结果比较一致，说明该设计可行性较高。
- 结构设计 /
- 数值模拟 /
- 流场特性 /
- 气-液两相
Abstract: A 60 L cleaning vessel for rocket engine was designed according to the common cleaning methods of rocket engine at present. And the volume, shape size, strength, hole reinforcement, leg check, the cleaning vessel werecalculatedto complete the structural design. Furthermore, according to the Fluent numerical analysis, the internal flow fields of the cleaning vessel were simulated. And visualized pressure and velocity field nephograms of the whole process were obtained. At the same time, the VOF model in the multi-flow model was used to simulate the gas-liquid interface in the whole vessel. The simulation results showed that the numerical simulation were in a good agreement with the expected results of the design requirements, which indicated that the design was feasible.
- structural design /
- flow fields characteristic /
- flow fields /
- gas-liquid phases

HTML全文

图 1 60 L清洗容器设计图

下载: 全尺寸图片幻灯片

图 2 清洗容器计算网格

下载: 全尺寸图片幻灯片

图 3 清洗容器剖面压力云图

下载: 全尺寸图片幻灯片

图 4 清洗容器剖面速度云图

下载: 全尺寸图片幻灯片

图 5 清洗容器剖面气液相图

下载: 全尺寸图片幻灯片

表 1 网格质量分布

参数值质量分布扭曲度

0.4 ~ 0.5 12% 0
0.5 ~ 0.6 36% 24.0%
0.6 ~ 1.0 52% 76.0%

下载: 导出CSV

参考文献(15)

[1]	刘昌国, 黄永民, 林庆国. 液体火箭发动机用N₂O₄、甲基肼的清洗剂的研制[J]. 化学推进剂与高分子材料, 2018, 16(2): 53-58 Liu C G, Huang Y M, Liu Q G. Development of N₂O₄ and methyl hydrazine cleaning agents for liquid rocket engine[J]. Chemical Propellants & Polymeric Materials, 2018, 16(2): 53-58 (in Chinese)
[2]	Dapelo D, Alberini F, Bridgeman J. Euler-Lagrange CFD modelling of unconfined gas mixing in anaerobic digestion[J]. Water Research, 2015, 85: 497-511 doi: 10.1016/j.watres.2015.08.042
[3]	侯祯, 蔡创雄, 张亚朋, 等. 硝酸盐自然循环回路熔盐空气热交换器风冷通道内流场特性分析[J]. 核技术, 2018, 41(10): 72-78 Hou Z, Cai C X, Zhang Y P, et al. Analysis of natural circulation flow field inside the air-cooled channel of molten salt-air heat exchanger in the nitrate natural circulation loop[J]. Nuclear Techniques, 2018, 41(10): 72-78 (in Chinese
[4]	张文武, 余志毅, 李泳江, 等. 叶片式气液混输泵全流道内流场特性分析[J]. 机械工程学报, 2019, 55(10): 168-174 doi: 10.3901/JME.2019.10.168 Zhang W W, Yu Z Y, Li Y J, et al. Flow characteristics analysis for the whole flow passage of a multiphase rotodynamic pump[J]. Journal of Mechanical Engineering, 2019, 55(10): 168-174 (in Chinese doi: 10.3901/JME.2019.10.168
[5]	中华人民共和国国家质量监督检验检疫总局, 中国国家标准化管理委员会.GB 150.1~150.4-2011 《压力容器》标准释义[S]. 北京: 中国标准出版社, 2012 General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of China .GB 150.1~150.4-2011 Pressure vessel[S]. Beijing: Standards Press of China, 2012 (in Chinese)
[6]	中华人民共和国国家发展和改革委员会.JB/T 4712.2-2007 容器支座第2部分腿式支座[S]. 北京: 机械工业出版社, 2008 National Development and Reform Commission. JB/T 4712.2-2007 Vessel supports-part 2: leg support[S]. Beijing: China Machine Press, 2018 (in Chinese)
[7]	蔡玉强, 李亚丛. 液体蒸发的数值模拟[J]. 华北理工大学学报, 2017, 39(3): 99-104 Cai Y Q, Li Y C. Numerical simulation of liquid evaporation[J]. Journal of North China University of Science and Technology (Natural Science Edition), 2017, 39(3): 99-104 (in Chinese
[8]	范华, 杨刚, 李冰. 压力旋流喷嘴内流场特性模拟研究[J]. 机电工程, 2018, 35(8): 838-842 doi: 10.3969/j.issn.1001-4551.2018.08.011 Fan H, Yang G, Li B. Numerical investigation on inner flow field of pressure swirl nozzle[J]. Journal of Mechanical & Electrical Engineering, 2018, 35(8): 838-842 (in Chinese doi: 10.3969/j.issn.1001-4551.2018.08.011
[9]	黄晓庆, 张旭, 张东亮. 撞击型喷嘴雾化特性的试验研究[J]. 流体机械, 2016, 44(4): 1-3, 16 doi: 10.3969/j.issn.1005-0329.2016.04.001 Huang X Q, Zhang X, Zhang D L. Experimental study on the atomization characteristic of impingement-type nozzle[J]. Fluid Machinery, 2016, 44(4): 1-3, 16 (in Chinese doi: 10.3969/j.issn.1005-0329.2016.04.001
[10]	龚杰, 郭春雨, 赵大刚, 等. 导管桨内流场及涡特性DES模拟[J]. 哈尔滨工程大学学报, 2019, 40(8): 1381-1386 Gong J, Guo C Y, Zhao D G, et al. Detached eddy simulations of internal flow fields and vortex characteristics of ducted propellers[J]. Journal of Harbin Engineering University, 2019, 40(8): 1381-1386 (in Chinese
[11]	Bhattacharyya A, Krasilnikov V, Steen S. A CFD-based scaling approach for ducted propellers[J]. Ocean Engineering, 2016, 123: 116-130 doi: 10.1016/j.oceaneng.2016.06.011
[12]	Gaggero S, Tani G, Viviani M, et al. A study on the numerical prediction of propellers cavitating tip vortex[J]. Ocean Engineering, 2014, 92: 137-161 doi: 10.1016/j.oceaneng.2014.09.042
[13]	胡健, 王楠, 胡洋. 加速导管和减速导管的性能比较[J]. 北京航空航天大学学报, 2017, 43(2): 240-252 Hu J, Wang N, Hu Y. Performance comparison of accelerating duct and decelerating duct[J]. Journal of Beijing University of Aeronautics and Astronautics, 2017, 43(2): 240-252 (in Chinese
[14]	杨兆铭, 陈建磊, 韩云蕊, 等. 二级旋流气液分离装置设计与流场特性模拟[J]. 过程工程学报, 2018, 18(6): 1198-1209 doi: 10.12034/j.issn.1009-606X.218124 Yang Z M, Chen J L, Han Y R, et al. Design of two-stage swirling gas-liquid separator and simulation of flow field characteristics[J]. The Chinese Journal of Process Engineering, 2018, 18(6): 1198-1209 (in Chinese doi: 10.12034/j.issn.1009-606X.218124
[15]	Wang A M, Marashdeh Q, Fan L S. ECVT imaging and model analysis of the liquid distribution inside a horizontally installed passive cyclonic gas–liquid separator[J]. Chemical Engineering Science, 2016, 141: 231-239 doi: 10.1016/j.ces.2015.11.004