Calibration and Uncertainty Analysis of Optical Fiber Bragg Grating Vibration Sensor
-
摘要: 采用相对校准法对振动传感器进行标定,将被校传感器与标准传感器背靠背固定在振动台中心,承受相同的振动信号,对标准振动传感器的输出量与被校振动传感器的输出量作比较和分析,并且引入了不确定度分析。实验结果表明:Fiber Bragg Grating(FBG)振动传感器标定平台标定得到FBG振动传感器的灵敏度为5.115 pm/g,线性度为3.5%,重复性误差为4.9% FS,校准装置的测量不确定度为0.003 8 g。满足待测FBG振动传感器的标定要求,提高了FBG振动传感器检定的工作效率和标定精度,可以运用于实际工程中。Abstract: The relative calibration method is used to complete the calibration of the vibration sensor in this paper, the experimental sensor is put on the center of the shaking table being back-to-back with standard sensor, the data from standard vibration sensor and the experimental sensor are compared and analyzed, and introducing the uncertainty analysis. The experimental results show that the Fiber Bragg Grating(FBG) vibration sensor calibration platform is calibrated to obtain the FBG vibration sensor with a sensitivity of 5.115 pm/g, linearity of 3.5%, repeatability error of 4.9% FS, and calibration uncertainty of the calibration device is 0.003 8 g. It satisfies the calibration requirements of the FBG vibration sensor to be tested, improves the working efficiency and calibration accuracy of the FBG vibration sensor verification, and this method can be applied to practical engineering.
-
Key words:
- optical fiber Bragg grating /
- vibration sensor /
- calibration /
- uncertainty /
- experiment
-
表 1 传感器的正反行程重复性误差
100 Hz 600 Hz 正行程 反行程 正行程 反行程 5%FS 5%FS 4.8%FS 4.8%FS 表 2 1.5 g加速度测量结果
测试次数 测量加速度/g 1 1.492 2 1.498 3 1.49 4 1.496 5 1.5 6 1.499 7 1.509 8 1.498 9 1.489 10 1.509 -
[1] 贾鹏.基于FBG加速度传感器的振动检测系统[D].南昌: 南昌航空大学, 2018Jia P. The vibration detection system based on FBG acceleration sensor[D]. Nanchang: Nanchang Hangkong University, 2018(in Chinese) [2] 姚敏, 赵振刚, 李凯, 等.基于3D打印技术的全绝缘多简支梁光纤Bragg光栅振动传感器研究[J].光学技术, 2018, 44(6):698-702 http://d.old.wanfangdata.com.cn/Periodical_gxjs201806012.aspxYao M, Zhao Z G, Li K, et al. Study on Bragg grating vibration sensor of fully insulated multi-cantilever beam based on 3D printing technology[J]. Optical Technique, 2018, 44(6):698-702(in Chinese) http://d.old.wanfangdata.com.cn/Periodical_gxjs201806012.aspx [3] 高忠华, 陈锡侯, 彭东林.时栅角位移传感器在线自标定系统[J].光学精密工程, 2015, 23(1):93-101 http://www.cnki.com.cn/Article/CJFDTotal-GXJM201501013.htmGao Z H, Chen X H, Peng D L. Online self-calibration system for time grating angular displacement sensor[J]. Optics and Precision Engineering, 2015, 23(1):93-101(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-GXJM201501013.htm [4] 孙桥, 王建林, 胡红波, 等.低g值碰撞式冲击加速度计量标准装置研究与建立[J].振动与冲击, 2015, 34(10):179-183 http://www.cqvip.com/QK/95775X/201510/664818223.htmlSun Q, Wang J L, Hu H B, et al. Development of a low-g shock standard device based on rigid body collision for shock acceleration calibration[J]. Journal of Vibration and Shock, 2015, 34(10):179-183(in Chinese) http://www.cqvip.com/QK/95775X/201510/664818223.html [5] 曾利民, 曾汉.一种冲击加速度计校准新方法[J].爆炸与冲击, 2013, 33(5):531-536 http://d.wanfangdata.com.cn/Periodical/hbgxycsjsxb201301004Zeng L M, Zeng H. A new method for calibrating shock accelerometers[J]. Explosion and Shock Waves, 2013, 33(5):531-536(in Chinese) http://d.wanfangdata.com.cn/Periodical/hbgxycsjsxb201301004 [6] 王志鹏.超低频振动校准装置自动测控系统的研究[D].杭州: 浙江大学, 2011Wang Z P. Research on automatic measurement and control system for ultralow-frequency vibration calibration device[D]. Hangzhou: Zhejiang University, 2011(in Chinese) [7] 范静, 杨军, 李程.基于激光测试技术的脉冲式压力校准方法[C]//2010航空试验测试技术学术交流会论文集.上海: 航空工业测控技术发展中心, 中国航空学会测试技术分会, 《测控技术》杂志社, 2010: 3Fan J, Yang J, Li C. Pulse pressure calibration method based on laser testing technology[C]//2010 Aviation Test Technology Conference Papers. Shanghai: Aviation Industry Measurement and Control Technology Development Center, China Aviation Society Test Technology Branch, "Measurement and Control Technology" Magazine, 2010: 3(in Chinese) [8] 祖洪彬, 王收军, 李俊义, 等.波高传感器标定系统[J].制造业自动化, 2009, 31(3):101-103 http://d.wanfangdata.com.cn/Thesis/Y1591460Zu H B, Wang S J, Li J Y, et al. Wave height sensor calibration system[J]. Manufacturing Automation, 2009, 31(3):101-103(in Chinese) http://d.wanfangdata.com.cn/Thesis/Y1591460 [9] Choi N S, Jung D W. A calibration method of mechanical strains from a temperature-compensating FBG sensor[J]. Modern Physics Letters B, 2008, 22(11):1111-1115 doi: 10.1142/S0217984908015929 [10] 匙庆磊.低频标准振动台系统和振动校准技术研究[D].哈尔滨: 中国地震局工程力学研究所, 2014Chi Q L. A study of low-frequency standard vibration table systems and vibration calibration technology[D]. Harbin: Institute of Engineering Mechanics, China Earthquake Administration, 2014(in Chinese) [11] 魏明明, 金锐, 闻春华, 等.温湿度传感器校准结果的不确定度分析与评定[J].电子测量技术, 2018, 41(8):35-41 http://www.cnki.com.cn/Article/CJFDTotal-DZCL201808007.htmWei MM, Jin R, Wen C H, et al. Uncertainty analysis and evaluation of calibration results of temperature and humidity sensor[J]. Electronic Measurement Technology, 2018, 41(8):35-41(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-DZCL201808007.htm [12] 葛川, 张德福, 李朋志, 等.电容式位移传感器的线性度标定与不确定度评定[J].光学精密工程, 2015, 23(9):2546-2552 http://www.cnki.com.cn/Article/CJFDTotal-GXJM201509016.htmGe C, Zhang D F, Li P Z, et al. Linearity calibration and uncertainty evaluation for capacitance displacement sensor[J]. Optics and Precision Engineering, 2015, 23(9):2546-2552(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-GXJM201509016.htm [13] 米娟层, 李悦.测量重复性导致的标准不确定度评定方法分析[J].煤质技术, 2011, (6):37-39 http://www.cnki.com.cn/Article/CJFDTotal-MZYK201106013.htmMi J C, Li Y. Analysis of evaluation method of standard uncertainty caused by repeated measurements[J]. Goal Quality and Technology, 2011, (6):37-39(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-MZYK201106013.htm [14] 王志胜, 王道波, 蔡宗琰, 等.传感器标定的统一数据处理方法[J].传感器技术, 2004, 23(3):46-47, 50 http://www.cnki.com.cn/Article/CJFDTotal-CGQJ200403014.htmWang Z S, Wang D B, Cai Z Y, et al. Unified data processing method for sensor calibration[J]. Journal of Transducer Technology, 2004, 23(3):46-47, 50(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-CGQJ200403014.htm [15] 施昌彦.测量不确定度评定与表示指南[M].北京:中国计量出版社, 2000Shi C Y. Guidelines for evaluation and representation of measurement uncertainty[M]. Beijing:China Metrology Press, 2000(in Chinese) [16] 岳香梅, 王纪龙.测量标准不确定度的A类与B类评定[J].山西大同大学学报, 2007, 23(1):28-30 http://d.wanfangdata.com.cn/Periodical/sxdtdxxb200701010Yue X M, Wang J L. Evaluation of type A and B of standard uncertainty[J]. Journal of Shanxi Datong University, 2007, 23(1):28-30(in Chinese) http://d.wanfangdata.com.cn/Periodical/sxdtdxxb200701010 [17] 林奎明.B类不确定度计算方法的探讨[J].计量技术, 2000, (3):52-54 http://www.cnki.com.cn/Article/CJFDTotal-JLJS200003022.htmLin K M. Discussion on calculation method of class B uncertainty[J]. Measurement Technique, 2000, (3):52-54(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-JLJS200003022.htm [18] 林洪桦.B类不确定度估算法探讨[J].北京理工大学学报, 1984, (3):112-122 http://www.cnki.com.cn/Article/CJFDTotal-BJLG198403008.htmLin H H. Discussion on the estimation method of class B uncertainty[J]. Transactions of Beijing Institute of Technology, 1984, (3):112-122(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-BJLG198403008.htm