Research Progress in Measurement Methods of Grinding Wheel Surface
-
摘要: 砂轮被誉为"工业的牙齿"，其表面特征参数（包括微观形貌特征参数与宏观轮廓特征参数）是磨削过程的重要输入参数，它是决定砂轮磨削性能与服役寿命、进而影响工件表面完整性与面形精度的关键因素。砂轮表面在磨削过程中瞬息万变，因此开展砂轮表面测量研究对于评估砂轮性能、优化磨削过程、揭示磨削机理具有重要意义，它一直是磨削领域的重要研究课题。概述了砂轮表面直接测量方法的基本原理、研究进展及发展瓶颈，并对各测量方法的未来研究方向进行了预测。Abstract: The grinding wheel is known as the industrial tooth, and the surface characteristic parameters (including micro-topography characteristics, macro-profile characteristics) are important input parameters in the grinding process. They are the key factors that determine the grinding performance and service life of the grinding wheel, which in turn affects the surface integrity and surface accuracy of the workpiece. The surface of the grinding wheel changes rapidly in the grinding process. Therefore, the study on the surface measurement of the grinding wheel is of the great significance for evaluating the grinding performance, optimizing the grinding process and revealing the grinding mechanism, and which is always an important research topic in the field of grinding. The basic principle, research progress and development bottleneck of the direct measurement method of the grinding wheel surface are summarized, and the future research directions of each measurement method are predicted, which provides a reference for selecting the measurement method of the grinding wheel surface and indicates the direction in the measurement research of the grinding wheel surface.
-
Key words:
- grinding wheel /
- micro-topography /
- macro-profile /
- surface measurement /
- grinding performance
-
[1] Deng H, Xu Z, Wang L Q, et al. Laser micro-structuring of a coarse-grained diamond grinding wheel[J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(9-12):2947-2954 doi: 10.1007/s00170-018-3101-8 [2] Jackson M J. A review of the design of grinding wheels operating at excessive speeds[J]. The International Journal of Advanced Manufacturing Technology, 2018, 94(9-12):3979-4010 doi: 10.1007/s00170-017-1131-2 [3] 彭锐涛, 李仲平, 唐新姿, 等.磨粒排布对加压内冷却砂轮磨削性能的影响[J].机械科学与技术, 2018, 37(4):586-591 doi: 10.13433/j.cnki.1003-8728.2018.0415Peng R T, Li Z P, Tang X Z, et al. Effect of abrasive arraying forms on the grinding performance of a pressurized internal-cooling grinding wheel[J]. Mechanical Science and Technology for Aerospace Engineering, 2018, 37(4):586-591(in Chinese) doi: 10.13433/j.cnki.1003-8728.2018.0415 [4] Tang J J, Qiu Z J, Li T Y. A novel measurement method and application for grinding wheel surface topography based on shape from focus[J]. Measurement, 2019, 133:495-507 doi: 10.1016/j.measurement.2018.10.006 [5] Yin S H, Nguyen D, Chen F J, et al. Application of compressed air in the online monitoring of surface roughness and grinding wheel wear when grinding Ti-6Al-4V titanium alloy[J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(5-8):1315-1331 doi: 10.1007/s00170-018-2909-6 [6] Weiß M, Klocke F, Barth S, et al. Detailed analysis and description of grinding wheel topographies[J]. Journal of Manufacturing Science and Engineering, 2017, 139(5):054502 doi: 10.1115/1.4035531 [7] Lou S, Brown S B, Sun W J, et al. An investigation of the mechanical filtering effect of tactile CMM in the measurement of additively manufactured parts[J]. Measurement, 2019, 144:173-182 doi: 10.1016/j.measurement.2019.04.066 [8] Xie J, Xu J, Tang Y, et al. 3D graphical evaluation of micron-scale protrusion topography of diamond grinding wheel[J]. International Journal of Machine Tools and Manufacture, 2008, 48(11):1254-1260 doi: 10.1016/j.ijmachtools.2008.03.003 [9] Puerto P, Kirsch B, Madariaga J, et al. A comparison of techniques to measure the wear flat area of conventional and superabrasive grinding wheels[J]. Journal of Tribology, 2015, 137(2):024503 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=fc7ce76eb56093dcdc36a9cf7bd18d46 [10] Vidal G, Ortega N, Bravo H, et al. An analysis of electroplated CBN grinding wheel wear and conditioning during creep feed grinding of aeronautical alloys[J]. Metals, 2018, 8(5):350 doi: 10.3390/met8050350 [11] Tahvilian A M, Liu Z H, Champliaud H, et al. Characterization of grinding wheel grain topography under different robotic grinding conditions using confocal microscope[J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(5-8):1159-1171 doi: 10.1007/s00170-015-7109-z [12] 邓朝晖, 赵小雨, 刘伟, 等.基于球切多面体和光密度的砂轮建模与测量[J].机械工程学报, 2016, 52(21):190-197 http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201621023Deng Z H, Zhao X Y, Liu W, et al. Research of grinding wheel modeling and measuring based on the spherical coordinate and optical density[J]. Journal of Mechanical Engineering, 2016, 52(21):190-197(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201621023 [13] Yan L, Rong Y M, Jiang F, et al. Three-dimension surface characterization of grinding wheel using white light interferometer[J]. The International Journal of Advanced Manufacturing Technology, 2011, 55(1-4):133-141 doi: 10.1007/s00170-010-3054-z [14] 周丽君.基于垂直扫描白光干涉测量法的砂轮磨粒测量及评定[D].福建厦门: 华侨大学, 2013 http://cdmd.cnki.com.cn/Article/CDMD-10385-1014005111.htmZhou L J. The measurement and assessment of grinding wheel grains based on vertical scanning white-light interferometry[D]. Fujian Xiamen: Huaqiao University, 2013(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10385-1014005111.htm [15] 韦凤.金刚石砂轮微观出刃形貌的非接触检测及3D图形化评价[D].广州: 华南理工大学, 2010 http://cdmd.cnki.com.cn/article/cdmd-10561-2010227378.htmWei F. Non-contact measurement and 3D graphical evaluation of micron-scale protrusion topography of diamond grinding wheel[D]. Guangzhou: South China University of Technology, 2010(in Chinese) http://cdmd.cnki.com.cn/article/cdmd-10561-2010227378.htm [16] Darafon A, Warkentin A, Bauer R. Characterization of grinding wheel topography using a white chromatic sensor[J]. International Journal of Machine Tools and Manufacture, 2013, 70:22-31 doi: 10.1016/j.ijmachtools.2013.03.003 [17] Xie J, Wei F, Zheng J H, et al. 3D laser investigation on micron-scale grain protrusion topography of truncated diamond grinding wheel for precision grinding performance[J]. International Journal of Machine Tools and Manufacture, 2011, 51(5):411-419 doi: 10.1016/j.ijmachtools.2011.01.010 [18] 胡捷.垂直扫描白光干涉系统数据处理及其在砂轮形貌测量中的应用[D].福建厦门: 华侨大学, 2012 http://cdmd.cnki.com.cn/Article/CDMD-10385-1013001260.htmHu J. Data processing methods of vertical scanning white-light interferometry system and its application in measurement of grinding wheel topography[D]. Fujian Xiamen: Huaqiao University, 2012(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10385-1013001260.htm [19] Li C S, Sun L, Yang S M, et al. Three-dimensional characterization and modeling of diamond electroplated grinding wheels[J]. International Journal of Mechanical Sciences, 2018, 144:553-563 doi: 10.1016/j.ijmecsci.2018.06.010 [20] 缪晶晶, 崔长彩, 周丽君, 等.基于粒子群优化算法的金刚石砂轮磨粒边缘提取[J].图学学报, 2015, 36(2):238-243 doi: 10.3969/j.issn.2095-302X.2015.02.016Miao J J, Cui C C, Zhou L J, et al. Grains detection of diamond grinding wheel based on particle swarm optimization[J]. Journal of Graphics, 2015, 36(2):238-243(in Chinese) doi: 10.3969/j.issn.2095-302X.2015.02.016 [21] 王爽.垂直扫描白光干涉法砂轮三维形貌拼接技术的研究[D].福建厦门: 华侨大学, 2013 http://cdmd.cnki.com.cn/Article/CDMD-10385-1014005128.htmWang S. A study on stitching techniques of grinding wheel's topography based on vertical scanning white-light interferometry[D]. Fujian Xiamen: Huaqiao University, 2013(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10385-1014005128.htm [22] 李瑞旭, 崔长彩, 王爽, 等.基于粒子群优化算法的砂轮三维形貌匹配[J].计算机工程与应用, 2016, 52(11):265-270 doi: 10.3778/j.issn.1002-8331.1409-0085Li R X, Cui C C, Wang S, et al. 3D topography matching of diamond grinding wheel based on par-ticle swarm optimization[J]. Computer Engineering and Applications, 2016, 52(11):265-270(in Chinese) doi: 10.3778/j.issn.1002-8331.1409-0085 [23] Zhang Y H, Tang H Q, Hu D J. Studies on CCD on-line measurement system for grinding wheel wear[J]. Key Engineering Materials, 2005, 291-292:81-84 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.4028/www.scientific.net/KEM.291-292.81 [24] Fan K C, Lee M Z, Mou J I. On-line non-contact system for grinding wheel wear measurement[J]. The International Journal of Advanced Manufacturing Technology, 2002, 19(1):14-22 doi: 10.1007/PL00003964 [25] Xu L M, Fan F, Zhang Z, et al. Fast on-machine profile characterization for grinding wheels and error compensation of wheel dressing[J]. Precision Engineering, 2019, 55:417-425 doi: 10.1016/j.precisioneng.2018.10.010 [26] 杨栖凤, 崔长彩, 黄国钦.金刚石砂轮表面二维形貌全场测量和分析[J].华侨大学学报, 2018, 39(4):479-484 http://d.old.wanfangdata.com.cn/Periodical/hqdxxb201804002Yang Q F, Cui C C, Huang G Q. Measurement and analysis of two-dimensional surface topography of whole grinding wheel[J]. Journal of Huaqiao University, 2018, 39(4):479-484(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/hqdxxb201804002 [27] 崔长彩, 王克贤, 黄国钦, 等.单层钎焊金刚石砂轮表面磨粒全场快速测量[J].中国机械工程, 2019, 30(14):1639-1645 http://d.old.wanfangdata.com.cn/Periodical/zgjxgc201914001Cui C C, Wang K X, Huang G Q, et al. Fast measurement of abrasive grains on a single layer brazed diamond grinding wheel surface[J]. China Mechanical Engineering, 2019, 30(14):1639-1645(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/zgjxgc201914001 [28] 王克贤.基于线阵相机的大尺寸砂轮表面形貌快速全场测量方法[D].福建厦门: 华侨大学, 2018 http://cdmd.cnki.com.cn/Article/CDMD-10385-1018886995.htmWang K X. Fast full field measurement method of large size grind wheel surface topography based on line array camera[D]. Fujian Xiamen: Huaqiao University, 2018(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10385-1018886995.htm [29] Zhang Z C, Han Y, Chen J, et al. An enhancement method of obtaining interest points in binocular vision[J]. IFAC-PapersOnLine, 2018, 51(17):286-291 doi: 10.1016/j.ifacol.2018.08.177 [30] 王志强.双目视觉技术在砂轮地貌检测中的可行性研究[D].南京: 南京航空航天大学, 2005 http://cdmd.cnki.com.cn/Article/CDMD-10287-2005079127.htmWang Z Q. Research on the feasibility of grinding wheel topography detection with binocular vision[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2005(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10287-2005079127.htm [31] Smith S M, Brady J M. SUSAN-a new approach to low level image processing[J]. International Journal of Computer Vision, 1997, 23(1):45-78 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=9014b1312729690a5d01e1322fb0f04b [32] 顾毓敏.基于计算机双目视觉的砂轮地貌检测与分析研究[D].南京: 南京航空航天大学, 2006 http://cdmd.cnki.com.cn/Article/CDMD-10287-2006119596.htmGu Y M. Research on the grinding wheel topography detection with binocular vision[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2006(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10287-2006119596.htm [33] Cai R, Rowe W B. Assessment of vitrified CBN wheels for precision grinding[J]. International Journal of Machine Tools and Manufacture, 2004, 44(12-13):1391-1402 doi: 10.1016/j.ijmachtools.2004.04.004 [34] Breidenstein B, Denkena B, Grove T, et al. Enabling of component identification by high speed measuring of grinding wheel topography[J]. Procedia Technology, 2016, 26:252-258 doi: 10.1016/j.protcy.2016.08.034 [35] 陈锋, 陈五一, 陈志同.基于激光三角法的CBN杯形砂轮表面形貌检测[J].北京航空航天大学学报, 2011, 37(10):1321-1325 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bjhkhtdxxb201110026Chen F, Chen W Y, Chen Z T. Laser triangulation based measurement about the surface 3D topography of a cup CBN grinding wheel[J]. Journal of Beijing University of Aeronautics and Astronautics, 2011, 37(10):1321-1325(in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bjhkhtdxxb201110026 [36] 周炼, 安晨辉, 侯晶, 等.圆弧金刚石砂轮三维几何形貌的在位检测和误差评价[J].光学精密工程, 2017, 25(12):3079-3088 http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201712014Zhou L, An C H, Hou J, et al. 3D geometric topographic measurement and error evaluation of arc diamond wheel[J]. Optics and Precision Engineering, 2017, 25(12):3079-3088(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201712014 [37] 张玉舒.基于光切法三维形貌旋转测量仪的研究[D].济南: 山东大学, 2016 http://cdmd.cnki.com.cn/Article/CDMD-10422-1016159012.htmZhang Y S. Design of 3-D rotary measurement system based on light-sectioning method[D]. Ji'nan: Shandong University, 2016(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10422-1016159012.htm [38] 李慧鹏, 吕亚宁, 孙业飞, 等.基于光切法的曲面划痕深度测量技术[J].光子学报, 2017, 46(11):1112001 http://d.old.wanfangdata.com.cn/Periodical/gzxb201711014Li H P, Lü Y N, Sun Y F, et al. Depth measurement of scratches on the curved surface based on light-sectioning method[J]. Acta Photonica Sinica, 2017, 46(11):1112001(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gzxb201711014 [39] 李晓聪.基于结构光视觉的砂轮轮廓三维测量系统的研究[D].哈尔滨: 哈尔滨工业大学, 2015 http://d.wanfangdata.com.cn/Thesis/D755577Li X C. Research on three-dimensional measurement system of grinding wheel profile based on structured-light vision[D]. Harbin: Harbin Institute of Technology, 2015(in Chinese) http://d.wanfangdata.com.cn/Thesis/D755577 -
下载:
点击查看大图
图(14)
计量
- 文章访问数: 262
- HTML全文浏览量: 110
- PDF下载量: 26
- 被引次数: 0
