[1]
|
刘金辉, 蔡巍.车用内置式永磁驱动电机反电势谐波削弱方法[J].微电机, 2018, 51(6):7-10, 15 doi: 10.3969/j.issn.1001-6848.2018.06.002Liu J H, Cai W. Method for reducing EMF harmonics of interior permanent magnet synchronous motors for EVs[J]. Micromotors, 2018, 51(6):7-10, 15(in Chinese) doi: 10.3969/j.issn.1001-6848.2018.06.002
|
[2]
|
Piña Ortega A J, Paul S, Islam R, et al. Analytical model for predicting effects of manufacturing variations on cogging torque in surface-mounted permanent magnet motors[J]. IEEE Transactions on Industry Applications, 2016, 52(4):3050-3061 doi: 10.1109/TIA.2016.2554102
|
[3]
|
Bozorgi A M, Farasat M, Jafarishiadeh S. Model predictive current control of surface-mounted permanent magnet synchronous motor with low torque and current ripple[J]. IET Power Electronics, 2017, 10(10):1120-1128 doi: 10.1049/iet-pel.2016.0850
|
[4]
|
张炳义, 蒋鑫, 冯桂宏.磁钢充磁方式对高速永磁电机性能的影响研究[J].机电工程, 2018, 35(7):751-754 doi: 10.3969/j.issn.1001-4551.2018.07.018Zhang B Y, Jiang X, Feng G H. Effect of magnetic magnetizing method on the performance of high speed permanent magnet motor[J]. Journal of Mechanical & Electrical Engineering, 2018, 35(7):751-754(in Chinese) doi: 10.3969/j.issn.1001-4551.2018.07.018
|
[5]
|
陈萍, 唐任远, 佟文明, 等.高功率密度永磁同步电机永磁体涡流损耗分布规律及其影响[J].电工技术学报, 2015, 30(6):1-9 doi: 10.3969/j.issn.1000-6753.2015.06.001Chen P, Tang R Y, Tong W M, et al. Permanent magnet eddy current loss and its influence of high power density permanent magnet synchronous motor[J]. Transactions of China Electrotechnical Society, 2015, 30(6):1-9(in Chinese) doi: 10.3969/j.issn.1000-6753.2015.06.001
|
[6]
|
徐进彬, 张学义, 耿慧慧.永磁轮毂电机内嵌V型磁路结构分析[J].微特电机, 2018, 46(3):32-35 doi: 10.3969/j.issn.1004-7018.2018.03.009Xu J B, Zhang X Y, Geng H H. Analysis of embedded v-shaped magnetic circuit structure of permanent magnet hub-motor[J]. Small & Special Electrical Machines, 2018, 46(3):32-35(in Chinese) doi: 10.3969/j.issn.1004-7018.2018.03.009
|
[7]
|
王晓远, 高鹏.基于进化策略的轮毂电机永磁体结构优化设计[J].中国电机工程学报, 2015, 35(4):979-984 http://d.old.wanfangdata.com.cn/Periodical/zgdjgcxb201504027Wang X Y, Gao P. Optimal design of permanent magnets of in-wheel motor based on evolution strategy[J]. Proceedings of the CSEE, 2015, 35(4):979-984(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/zgdjgcxb201504027
|
[8]
|
Woo D K, Jeong B H. Irreversible demagnetization of permanent magnet in a surface-mounted permanent magnet motor with overhang structure[J]. IEEE Transactions on Magnetics, 2016, 52(4):8102606 http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=edf63ac59ba783d2a8136ac0b66a16f5
|
[9]
|
倪有源, 崔征山, 陈俊华, 等.磁极削角表贴式永磁电机解析法建模与分析[J].微特电机, 2018, 46(10):5-9, 14 doi: 10.3969/j.issn.1004-7018.2018.10.002Ni Y Y, Cui Z S, Chen J H, et al. Modeling and analysis of surface-mounted permanent magnet machines with chamfered magnets[J]. Small & Special Electrical Machines, 2018, 46(10):5-9, 14(in Chinese) doi: 10.3969/j.issn.1004-7018.2018.10.002
|
[10]
|
张河山, 邓兆祥, 杨金歌, 等.表贴式永磁电机磁场的解析计算与分析[J].汽车工程, 2018, 40(7):850-857, 864 http://d.old.wanfangdata.com.cn/Periodical/qcgc201807016Zhang H S, Deng Z X, Yang J G, et al. Analytic calculation and analysis of magnetic field in surface-mounted permanent magnet motor[J]. Automotive Engineering, 2018, 40(7):850-857, 864(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/qcgc201807016
|
[11]
|
王芳.表贴式永磁同步电机削极技术的研究[J].船电技术, 2018, 38(2):41-45 doi: 10.3969/j.issn.1003-4862.2018.02.010Wang F. Research on pole cutting of surface mount permanent magnet synchronous motor[J]. Marine Electric & Electronic Engineering, 2018, 38(2):41-45(in Chinese) doi: 10.3969/j.issn.1003-4862.2018.02.010
|
[12]
|
钟添明, 熊万里, 吕浪.永磁同步型机床电主轴齿槽转矩抑制方法研究[J].机械科学与技术, 2014, 33(5):716-722 doi: 10.13433/j.cnki.1003-8728.2014.0519Zhong T M, Xiong W L, Lü L. A method for suppressing cogging torque in permanent magnet synchronous motor spindle[J]. Mechanical Science and Technology for Aerospace Engineering, 2014, 33(5):716-722(in Chinese) doi: 10.13433/j.cnki.1003-8728.2014.0519
|
[13]
|
罗正豪, 井立兵, 高起兴.分段偏心磁极表贴式永磁电机优化设计[J].微特电机, 2018, 46(10):25-27, 37 doi: 10.3969/j.issn.1004-7018.2018.10.006Luo Z H, Jing L B, Gao Q X. Optimal design of segmented-eccentric magnet pole for SMP synchronous motor[J]. Small & Special Electrical Machines, 2018, 46(10):25-27, 37(in Chinese) doi: 10.3969/j.issn.1004-7018.2018.10.006
|
[14]
|
任超, 曹家勇, 梁庆华, 等.磁齿轮啮合型电机齿槽转矩影响因素分析[J].机械科学与技术, 2016, 35(11):1698-1702 doi: 10.13433/j.cnki.1003-8728.2016.1110Ren C, Cao J Y, Liang Q H, et al. Analysis on cogging torque of a magnetic-geared motor[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(11):1698-1702(in Chinese) doi: 10.13433/j.cnki.1003-8728.2016.1110
|
[15]
|
Wu L J, Zhu Z Q, Staton D, et al. Analytical model for predicting magnet loss of surface-mounted permanent magnet machines accounting for slotting effect and load[J]. IEEE Transactions on Magnetics, 2012, 48(1):107-117 doi: 10.1109/TMAG.2011.2165321
|