[1]
|
Mala G M, Li D Q. Flow characteristics of water in microtubes[J]. International Journal of Heat and Fluid Flow, 1999, 20(2):142-148 doi: 10.1016/S0142-727X(98)10043-7
|
[2]
|
Li W D, Lü M, Zhang H. The role of nanometer silicon dioxide in the modification of fluid magnetic abrasive[J]. Materials Science Forum, 2011, 694:229-233 doi: 10.4028/www.scientific.net/MSF.694
|
[3]
|
周钦, 孙桓五, 张云飞, 等.聚丙烯酸改良液体磁性磨具稳定性实验研究[J].磁性材料及器件, 2014;45(2):58-62 doi: 10.3969/j.issn.1001-3830.2014.02.014Zhou Q, Sun H W, Zhang Y F, et al. Experimental research on the stability improvement of liquid magnetic abrasive by polyacrylic acid[J]. Journal of Magnetic Materials and Devices, 2014;45(2):58-62(in Chinese) doi: 10.3969/j.issn.1001-3830.2014.02.014
|
[4]
|
赵志强, 段海栋, 孙桓五.液体磁性磨具孔光整加工工艺参数优化研究[J].现代制造工程, 2017;2):14-18, 29 http://d.old.wanfangdata.com.cn/Periodical/jxgys201702004Zhao Z Q, Duan H D, Sun H W. Optimization of process parameters when finishing hole by fluid magnetic abrasives[J]. Modern Manufacturing Engineering, 2017;2):14-18, 29(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jxgys201702004
|
[5]
|
孙桓五.液体磁性磨具光整加工技术研究[D].太原: 太原理工大学, 2008Sun H W. Study on the fluid magnetic abrasive finishing technology[D]. Taiyuan: Taiyuan University of Technology, 2008(in Chinese)
|
[6]
|
王光华, 孔金丞, 李雄军, 等.羰基铁粉表面改性及其热稳定性研究[J].中国粉体技术, 2011, 17(2):5-8 doi: 10.3969/j.issn.1008-5548.2011.02.002Wang G H, Kong J C, Li X J, et al. Investigation on surface modification and thermal stability of carbonyl iron particles[J]. China Powder Science and Technology, 2011, 17(2):5-8(in Chinese) doi: 10.3969/j.issn.1008-5548.2011.02.002
|
[7]
|
魏美玲, 马峻峰, 陈文, 等.羰基铁粉体表面化学镀镍改性的研究[J].硅酸盐通报, 2003(5):17-20 doi: 10.3969/j.issn.1001-1625.2003.05.004Wei M L, Ma J F, Chen W, et al. Study on surface modification of carbonyl iron powder by electroless plating[J]. Bulletin of the Chinese Ceramic Society, 2003(5):17-20(in Chinese) doi: 10.3969/j.issn.1001-1625.2003.05.004
|
[8]
|
叶志民, 庄海燕, 董伟, 等.羰基铁粉表面改性及其电磁性能研究[J].材料开发与应用, 2014, 29(6):87-92 http://d.old.wanfangdata.com.cn/Periodical/clkfyyy201406017Ye Z M, Zhuang H Y, Dong W, et al. Study on the electromagnetic properties of the surface modified carbonyl iron[J]. Development and Application of Materials, 2014, 29(6):87-92(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/clkfyyy201406017
|
[9]
|
王鹏川, 金洙吉.铁基金刚石磁性磨料的制备及其性能研究[J].表面技术, 2016, 45(12):78-83 http://d.old.wanfangdata.com.cn/Periodical/bmjs201612013Wang P C, Jin Z J. Preparation and performance of iron-based diamond magnetic abrasive[J]. Surface Technology, 2016, 45(12):78-83(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/bmjs201612013
|
[10]
|
Ting T H, Jau Y N, Yu R P. Microwave absorbing properties of polyaniline/multi-walled carbon nanotube composites with various polyaniline contents[J]. Applied Surface Science, 2012, 258:3184-3190 doi: 10.1016/j.apsusc.2011.11.061
|
[11]
|
张云飞, 孙桓五, 王娟, 等.聚乙二醇对液体磁性磨具稳定性的影响研究[J].现代制造工程, 2016(5):15-18 http://d.old.wanfangdata.com.cn/Periodical/jxgys201605005Zhang Y F, Sun H W, Wang J, et al. Experimental research on the stability improvement of liquid magnetic abrasive by polyethylene glycol[J]. Modern Manufacturing Engineering, 2016(5):15-18(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jxgys201605005
|
[12]
|
Gesoglu M, Güneyisi E, Asaad D S, et al. Properties of low binder ultra-high performance cementitious composites:comparison of nanosilica and microsilica[J]. Construction and Building Materials, 2016, 102:706-713 doi: 10.1016/j.conbuildmat.2015.11.020
|
[13]
|
Li G Y, Wang P M, Zhao X H. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes[J]. Carbon, 2005, 43(6):1239-1245 doi: 10.1016/j.carbon.2004.12.017
|
[14]
|
范培育, 付业伟, 李贺军, 等.碳纳米管双层纸基摩擦材料研究[J].机械科学与技术, 2011, 30(12):2107-2110, 2115 http://d.old.wanfangdata.com.cn/Conference/7932884Fan P Y, Fu Y W, Li H J, et al. Study of the two-layer paper-based friction materials containing carbon nanotubes as friction-layer[J]. Mechanical Science and Technology for Aerospace Engineering, 2011, 30(12):2107-2110, 2115(in Chinese) http://d.old.wanfangdata.com.cn/Conference/7932884
|
[15]
|
杨小朋, 李秀红, 李文辉, 等.一种新型粘弹性磁性磨具的制备及其加工实验研究[J].机械设计与制造, 2017(6):97-100 doi: 10.3969/j.issn.1001-3997.2017.06.026Yang X P, Li X H, Li W H, et al. The preparation of a new viscoelastic magnetic abrasive tool and finishing experiment research[J]. Machinery Design & Manufacture, 2017(6):97-100(in Chinese) doi: 10.3969/j.issn.1001-3997.2017.06.026
|
[16]
|
胡晶, 谢国治, 顾家新, 等.多元助剂改性羰基铁粉雷达波低频吸波性能研究[J].材料导报, 2018, 32(4):520-524 http://d.old.wanfangdata.com.cn/Periodical/cldb201804002Hu J, Xie G Z, Gu J X, et al. Low frequency radar wave absorbing performance of carbonyl iron powder modified by compound auxiliary agents[J]. Materials Review, 2018, 32(4):520-524(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/cldb201804002
|
[17]
|
陈逢军, 唐宇, 苗想亮, 等.磨料射流表面抛光研究综述[J].表面技术, 2015, 44(11):119-127 http://d.old.wanfangdata.com.cn/Periodical/bmjs201511019Chen F J, Tang Y, Miao X L, et al. Review on the abrasive jet surface polishing (AJP) technology[J]. Surface Technology, 2015, 44(11):119-127(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/bmjs201511019
|