[1]
|
雅柯维茨.飞机长寿命螺栓连接和铆接技术[M].张国梁, 译.北京: 航空工业出版社, 1991Jycovez. Bolting and riveting technology for long life of aircraft[M]. Zhang G L, trans. Beijing: Aviation Industry Press, 1991(in Chinese)
|
[2]
|
范玉青.现代飞机制造技术[M].北京:北京航空航天大学出版社, 2001Fan Y Q. Modern aircraft manufacturing technology[M]. Beijing:Beihang University Press, 2001(in Chinese)
|
[3]
|
毕树生, 梁杰, 战强, 等.机器人技术在航空工业中的应用[J].航空制造技术, 2009(4):34-39 doi: 10.3969/j.issn.1671-833X.2009.04.001Bi S S, Liang J, Zhan Q, et al. Applications of robotics technology in aviation industry[J]. Aeronautical Manufacturing Technology, 2009(4):34-39(in Chinese) doi: 10.3969/j.issn.1671-833X.2009.04.001
|
[4]
|
刘顺涛, 陈雪梅, 郭喜锋, 等.飞机蒙皮自动制孔工艺设计研究[J].制造业自动化, 2017, 39(4):87-90 doi: 10.3969/j.issn.1009-0134.2017.04.022Liu S T, Chen X M, Guo X F, et al. Research on the process of automatic holing for airplane skin[J]. Manufacturing Automation, 2017, 39(4):87-90(in Chinese) doi: 10.3969/j.issn.1009-0134.2017.04.022
|
[5]
|
喻龙, 章易镰, 王宇晗, 等.飞机自动钻铆技术研究现状及其关键技术[J].航空制造技术, 2017(9):16-25 http://d.old.wanfangdata.com.cn/Periodical/hkgyjs201709001Yu L, Zhang Y L, Wang Y H, et al. Research status of aircraft automatic drilling and riveting system and its key technology[J]. Aeronautical Manufacturing Technology, 2017(9):16-25(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/hkgyjs201709001
|
[6]
|
王良, 郭春英.飞机装配制孔技术发展浅析[J].航空制造技术, 2017(23-24):88-92, 102 http://d.old.wanfangdata.com.cn/Periodical/hkgyjs201723014Wang L, Guo C Y. Drilling technology development analysis in aircraft assembly[J]. Aeronautical Manufacturing Technology, 2017(23-24):88-92, 102(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/hkgyjs201723014
|
[7]
|
孙浩.基于MBD的飞机部件自动制孔工艺设计与制孔技术研究[D].沈阳: 沈阳航空航天大学, 2018Sun H. Based on MBD aircraft components automatic drilling process design and the drilling technology research[D]. Shenyang: Shenyang Aerospace University, 2018(in Chinese)
|
[8]
|
毕运波, 吴原骅, 朱伟东, 等.飞机叠层结构预联接工艺优化[J].浙江大学学报:工学版, 2015, 49(11):2040-2046 http://d.old.wanfangdata.com.cn/Periodical/zjdxxb-gx201511003Bi Y B, Wu Y H, Zhu W D, et al. Pre-connected process optimization of aircraft stacks[J]. Journal of Zhejiang University:Engineering Science, 2015, 49(11):2040-2046(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/zjdxxb-gx201511003
|
[9]
|
吴原骅.面向自动化制孔的飞机叠层结构预连接工艺优化[D].杭州: 浙江大学, 2015 http://cdmd.cnki.com.cn/Article/CDMD-10335-1015630274.htmWu Y H. Pre-connected process optimization of aircraft stacks for automatic drilling system[D]. Hangzhou: Zhejiang University, 2015(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10335-1015630274.htm
|
[10]
|
Xiao H, Li Y, Zhang K F, et al. Multi-objective optimization method for automatic drilling and riveting sequence planning[J]. Chinese Journal of Aeronautics, 2010, 23(6):734-742 doi: 10.1016/S1000-9361(09)60276-4
|
[11]
|
唐伟.一类蒙皮/长桁壁板结构预连接工艺优化方法研究[D].杭州: 浙江大学, 2017 http://cdmd.cnki.com.cn/Article/CDMD-10335-1017047167.htmTang W. Study on optimization methods of pre-joining processes for a class of skin-stringer panel structures[D]. Hangzhou: Zhejiang University, 2017(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10335-1017047167.htm
|
[12]
|
韩志仁, 孙浩, 刘顺涛, 等.飞机蒙皮自动制孔中夹紧孔布置方法研究[J].沈阳航空航天大学学报, 2017, 34(5):21-25 doi: 10.3969/j.issn.2095-1248.2017.05.003Han Z R, Sun H, Liu S T, et al. Study on clamping hole arrangement in automatic fitting of airplanes[J]. Journal of Shenyang Aerospace University, 2017, 34(5):21-25(in Chinese) doi: 10.3969/j.issn.2095-1248.2017.05.003
|
[13]
|
卢贤刚.预连接工艺对壁板装配静动态性能影响分析[D].杭州: 浙江大学, 2016 http://cdmd.cnki.com.cn/Article/CDMD-10335-1016042266.htmLu X G. Static and dynamic performance analysis of influ-ence of pre-joining of aircraft panel[D]. Hangzhou: Zhejiang University, 2016(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10335-1016042266.htm
|
[14]
|
《航空制造工程手册》总编委会.航空制造工程手册[M].北京:航空工业出版社, 1998General Editorial Board of "Manual of Aeronautical Manufacturing Engineering". Manual of aeronautical manufacturing engineering[M]. Beijing:Aviation Industry Press, 1998(in Chinese)
|
[15]
|
余炳辉.整体分布优化算法研究及应用[M].成都:西南交通大学出版社, 2012Yu B H. Research and application of integral distribution optimization algorithm[M]. Chengdu:Southwest Jiaotong University Press, 2012(in Chinese)
|