留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

新型六自由度微动并联机构的工作空间分析

程颖 杨德华 吴常铖 费飞

程颖, 杨德华, 吴常铖, 费飞. 新型六自由度微动并联机构的工作空间分析[J]. 机械科学与技术, 2019, 38(3): 433-439. doi: 10.13433/j.cnki.1003-8728.20180178
引用本文: 程颖, 杨德华, 吴常铖, 费飞. 新型六自由度微动并联机构的工作空间分析[J]. 机械科学与技术, 2019, 38(3): 433-439. doi: 10.13433/j.cnki.1003-8728.20180178
Cheng Ying, Yang Dehua, Wu Changcheng, Fei Fei. Workspace Analysis of a Novel Six DOFs Parallel Mechanism with Micro Displacement[J]. Mechanical Science and Technology for Aerospace Engineering, 2019, 38(3): 433-439. doi: 10.13433/j.cnki.1003-8728.20180178
Citation: Cheng Ying, Yang Dehua, Wu Changcheng, Fei Fei. Workspace Analysis of a Novel Six DOFs Parallel Mechanism with Micro Displacement[J]. Mechanical Science and Technology for Aerospace Engineering, 2019, 38(3): 433-439. doi: 10.13433/j.cnki.1003-8728.20180178

新型六自由度微动并联机构的工作空间分析

doi: 10.13433/j.cnki.1003-8728.20180178
基金项目: 

国家自然科学基金项目 U1531110

详细信息
    作者简介:

    程颖(1995-), 硕士研究生, 研究方向为精密仪器、并联机构, cying0208@126.com

    通讯作者:

    杨德华, 教授, 硕士生导师, 博士, dhyang@nuaa.edu.cn

  • 中图分类号: TH112

Workspace Analysis of a Novel Six DOFs Parallel Mechanism with Micro Displacement

  • 摘要: 在实现天文光学镜面毫米级行程位姿调整和微纳米级精密定位中,基于全柔性铰链的新型3SPS+3(SP-U)六自由度并联机构的工作空间主要由柔性铰链相对较小的回转空间所定义。分析了3SPS+3(SP-U)并联机构运动自由度及其部分自由度解耦特性,并根据实物样机的几何参数建立了其运动学逆解模型。在此基础上,基于柔性铰链回转空间及支链行程范围,采用搜索法分析了其工作空间,并采用激光跟踪仪对样机的工作空间进行了实测。理论计算和实测结果验证了该机构动平台中心点的平动位移空间可达±3 mm,转角空间可达±1°,确保了其在应用中具有足够的工作范围,达到了设计目标。
  • 图  1  3SPS+3(SP-U)六自由度微动并联机构

    图  2  柔性铰链

    图  3  动平台运动轨迹图

    图  4  六根主动支链的长度变化曲线

    图  5  工作空间求解流程图

    图  6  初始姿态时的位置可达工作空间

    图  7  初始位置时的姿态可达工作空间

    图  8  激光跟踪仪测量实验

    图  9  初始姿态时样机的位置可达工作空间

    图  10  初始位置处实验样机的姿态可达工作空间

    表  1  机构的结构参数

    mm
    参数名称 参数值
    RP 135.1
    RA 144.9
    RB 127.9
    h 248.3
    下载: 导出CSV

    表  2  动平台的转动角度

    (°)
    控制转动值 激光跟踪仪实测转动值 拟合平面转动值
    X轴转动 +1 +1.004 6 +1.025 6
    -1 -0.996 3 -0.979 9
    Y轴转动 +1 +1.006 2 +0.992 5
    -1 -1.005 2 -0.953 6
    Z轴转动 +1 +1.005 5 +0.943 3
    -1 -1.008 3 -0.935 5
    下载: 导出CSV
  • [1] 文新荣, 胡企千, 周尊源.望远镜主副镜实时自校正系统[J].中国机械工程, 2003, 14(14):1191-1194 doi: 10.3321/j.issn:1004-132X.2003.14.007

    Wen X R, Hu Q Q, Zhou Z Y. Real-time auto-adjusting system for a telescope[J]. China Mechanical Engineering, 2003, 14(14):1191-1194(in Chines doi: 10.3321/j.issn:1004-132X.2003.14.007
    [2] Liu Z, Deng Y Y, Jin Z Y, et al. Introduction to the Chinese giant solar telescope[C]//Proceedings Of the SPIE Volume 8444, Ground-based and Airborne Telescopes Ⅳ. Amsterdam, Netherlands: SPE, 2012: 844405
    [3] 顾伯忠, 乐中宇.基于六杆机构的望远镜副镜支承的分析[J].天文研究与技术, 2009, 6(4):334-341 http://d.old.wanfangdata.com.cn/Periodical/yntwttk200904012

    Gu B Z, Le Z Y. Analysis of a supporting system with a stewart platform for telescope secondary mirror[J]. Astronomical Research & Technology, 2009, 6(4):334-341(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/yntwttk200904012
    [4] 李永刚, 宋轶民, 冯志友.并联机器人机构静刚度研究现状与展望[J].机械设计, 2010, 27(3):1-4 http://d.old.wanfangdata.com.cn/Periodical/jxsj201003001

    Li Y G, Song Y M, Feng Z Y. Overview of the study on the stiffness of parallel manipulators[J]. Journal of Machine Design, 2010, 27(3):1-4(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jxsj201003001
    [5] 程景全.天文望远镜原理和设计[M].北京:中国科学技术出版社, 2003

    Cheng J Q. Principles of astronomical telescope design[M]. Beijing:China Science and Technology Press, 2003(in Chinese)
    [6] Han X G, Cui X L, Chen W Y. Analysis on the instantaneous stiffness of the 3-RPS parallel machine[J]. Key Engineering Materials, 2009, 407-408:63-67 doi: 10.4028/www.scientific.net/KEM.407-408
    [7] Yang D H, Jin Z Y, Liu Z. Support optimization of the ring primary mirror of a 2m solar telescope[C]//Proceedings Volume 9906, Ground-based and Airborne Telescopes Ⅵ. Edinburgh, United Kingdom: SPE, 2016: 990651
    [8] 杨德华, 程颖, 费飞, 等.一种部分解耦的六自由度并联机构: 中国, 201610439769.2[P].2016-06-17

    Yang D H, Cheng Y, Fei F, et al. Partially-decoupled six-degree-of-freedom parallel mechanism: CN, 201610439769.2[P]. 2016-06-17(in Chinese)
    [9] Jun F H, Pei L, Xiang F C. Optimum design of a parabolic flexure hinge based on compliance closed-form equations[J]. Advanced Materials Research, 2012, 424-425:299-303 doi: 10.4028/www.scientific.net/AMR.424-425
    [10] Di Gregorio R. Kinematics of the translational 3-URC mechanism[J]. Journal of Mechanism Design, 2004, 126(6):1113-1117 doi: 10.1115/1.1814390
    [11] 黄俊杰, 贾智宏, 赵俊伟.3-PRS并联机器人的工作空间研究与分析[J].机械科学与技术, 2012, 31(4):660-663 http://journals.nwpu.edu.cn/jxkxyjs/CN/abstract/abstract5758.shtml

    Huang J J, Jia Z H, Zhao J W. Analysis and research on the workspace of 3-PRS parallel robot[J]. Mechanical Science and Technology for Aerospace Engineering, 2012, 31(4):660-663(in Chinese) http://journals.nwpu.edu.cn/jxkxyjs/CN/abstract/abstract5758.shtml
    [12] 李大海, 宋胜涛, 李瑞琴, 等.对称型平面3-RRR并联机构可达工作空间研究[J].机械传动, 2015, 39(9):29-31, 36 http://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201509007.htm

    Li D H, Song S T, Li R Q, et al. Research of the reachable workspace of symmetrical planar 3-RRR parallel mechanism[J]. Journal of Mechanical Transmission, 2015, 39(9):29-31, 36(in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JXCD201509007.htm
    [13] 程刚, 于敬利, 袁欣, 等.3SPS+1PS髋关节并联仿生试验系统工作空间优化[J].机械工程学报, 2013, 49(23):88-95 http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201323013

    Cheng G, Yu J L, Yuan X, et al. Study on workspace optimization of 3SPS+1PS parallel hip joint simulator[J]. Journal of Mechanical Engineering, 2013, 49(23):88-95(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/jxgcxb201323013
    [14] 赵燕江, 张永德, 姜金刚, 等.基于Matlab的机器人工作空间求解方法[J].机械科学与技术, 2009, 28(12):1657-1661, 1666 doi: 10.3321/j.issn:1003-8728.2009.12.027

    Zhao Y J, Zhang Y D, Jiang J G, et al. A method for solving robot workspace based on Matlab[J]. Mechanical Science and Technology for Aerospace Engineering, 2009, 28(12):1657-1661, 1666(in Chinese) doi: 10.3321/j.issn:1003-8728.2009.12.027
    [15] Shah H L. Kinematic, dynamic and workspace analysis of a Novel 6-DOF parallel manipulator[D]. New York: State University of New York, 2010: 16-77
  • 加载中
图(10) / 表(2)
计量
  • 文章访问数:  364
  • HTML全文浏览量:  224
  • PDF下载量:  43
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-02-27
  • 刊出日期:  2019-03-05

目录

    /

    返回文章
    返回